diff mbox series

[net,v2] ethtool: fix the check logic of at least one channel for RX/TX

Message ID 20210225125102.23989-1-simon.horman@netronome.com (mailing list archive)
State Accepted
Commit a4fc088ad4ff4a99d01978aa41065132b574b4b2
Delegated to: Netdev Maintainers
Headers show
Series [net,v2] ethtool: fix the check logic of at least one channel for RX/TX | expand

Checks

Context Check Description
netdev/cover_letter success Link
netdev/fixes_present success Link
netdev/patch_count success Link
netdev/tree_selection success Clearly marked for net
netdev/subject_prefix success Link
netdev/cc_maintainers warning 3 maintainers not CCed: bjorn@kernel.org magnus.karlsson@intel.com colin.king@canonical.com
netdev/source_inline success Was 0 now: 0
netdev/verify_signedoff success Link
netdev/module_param success Was 0 now: 0
netdev/build_32bit success Errors and warnings before: 1 this patch: 1
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/verify_fixes success Link
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 57 lines checked
netdev/build_allmodconfig_warn success Errors and warnings before: 1 this patch: 1
netdev/header_inline success Link
netdev/stable success Stable not CCed

Commit Message

Simon Horman Feb. 25, 2021, 12:51 p.m. UTC 
From: Yinjun Zhang <yinjun.zhang@corigine.com>

The command "ethtool -L <intf> combined 0" may clean the RX/TX channel
count and skip the error path, since the attrs
tb[ETHTOOL_A_CHANNELS_RX_COUNT] and tb[ETHTOOL_A_CHANNELS_TX_COUNT]
are NULL in this case when recent ethtool is used.

Tested using ethtool v5.10.

Fixes: 7be92514b99c ("ethtool: check if there is at least one channel for TX/RX in the core")
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: Louis Peens <louis.peens@netronome.com>
---
V2: (suggested by Jakub Kicinski)
  - A better change to fix the check of exceeding max count as well
---
 net/ethtool/channels.c | 26 +++++++++++++-------------
 1 file changed, 13 insertions(+), 13 deletions(-)

Comments

patchwork-bot+netdevbpf@kernel.org Feb. 28, 2021, 8 p.m. UTC | #1 
Hello:

This patch was applied to netdev/net.git (refs/heads/master):

On Thu, 25 Feb 2021 13:51:02 +0100 you wrote:
> From: Yinjun Zhang <yinjun.zhang@corigine.com>
> 
> The command "ethtool -L <intf> combined 0" may clean the RX/TX channel
> count and skip the error path, since the attrs
> tb[ETHTOOL_A_CHANNELS_RX_COUNT] and tb[ETHTOOL_A_CHANNELS_TX_COUNT]
> are NULL in this case when recent ethtool is used.
> 
> [...]

Here is the summary with links:
  - [net,v2] ethtool: fix the check logic of at least one channel for RX/TX
    https://git.kernel.org/netdev/net/c/a4fc088ad4ff

You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html
diff mbox series

Patch

diff --git a/net/ethtool/channels.c b/net/ethtool/channels.c
index 25a9e566ef5c..6a070dc8e4b0 100644
--- a/net/ethtool/channels.c
+++ b/net/ethtool/channels.c
@@ -116,10 +116,9 @@  int ethnl_set_channels(struct sk_buff *skb, struct genl_info *info)
 	struct ethtool_channels channels = {};
 	struct ethnl_req_info req_info = {};
 	struct nlattr **tb = info->attrs;
-	const struct nlattr *err_attr;
+	u32 err_attr, max_rx_in_use = 0;
 	const struct ethtool_ops *ops;
 	struct net_device *dev;
-	u32 max_rx_in_use = 0;
 	int ret;
 
 	ret = ethnl_parse_header_dev_get(&req_info,
@@ -157,34 +156,35 @@  int ethnl_set_channels(struct sk_buff *skb, struct genl_info *info)
 
 	/* ensure new channel counts are within limits */
 	if (channels.rx_count > channels.max_rx)
-		err_attr = tb[ETHTOOL_A_CHANNELS_RX_COUNT];
+		err_attr = ETHTOOL_A_CHANNELS_RX_COUNT;
 	else if (channels.tx_count > channels.max_tx)
-		err_attr = tb[ETHTOOL_A_CHANNELS_TX_COUNT];
+		err_attr = ETHTOOL_A_CHANNELS_TX_COUNT;
 	else if (channels.other_count > channels.max_other)
-		err_attr = tb[ETHTOOL_A_CHANNELS_OTHER_COUNT];
+		err_attr = ETHTOOL_A_CHANNELS_OTHER_COUNT;
 	else if (channels.combined_count > channels.max_combined)
-		err_attr = tb[ETHTOOL_A_CHANNELS_COMBINED_COUNT];
+		err_attr = ETHTOOL_A_CHANNELS_COMBINED_COUNT;
 	else
-		err_attr = NULL;
+		err_attr = 0;
 	if (err_attr) {
 		ret = -EINVAL;
-		NL_SET_ERR_MSG_ATTR(info->extack, err_attr,
+		NL_SET_ERR_MSG_ATTR(info->extack, tb[err_attr],
 				    "requested channel count exceeds maximum");
 		goto out_ops;
 	}
 
 	/* ensure there is at least one RX and one TX channel */
 	if (!channels.combined_count && !channels.rx_count)
-		err_attr = tb[ETHTOOL_A_CHANNELS_RX_COUNT];
+		err_attr = ETHTOOL_A_CHANNELS_RX_COUNT;
 	else if (!channels.combined_count && !channels.tx_count)
-		err_attr = tb[ETHTOOL_A_CHANNELS_TX_COUNT];
+		err_attr = ETHTOOL_A_CHANNELS_TX_COUNT;
 	else
-		err_attr = NULL;
+		err_attr = 0;
 	if (err_attr) {
 		if (mod_combined)
-			err_attr = tb[ETHTOOL_A_CHANNELS_COMBINED_COUNT];
+			err_attr = ETHTOOL_A_CHANNELS_COMBINED_COUNT;
 		ret = -EINVAL;
-		NL_SET_ERR_MSG_ATTR(info->extack, err_attr, "requested channel counts would result in no RX or TX channel being configured");
+		NL_SET_ERR_MSG_ATTR(info->extack, tb[err_attr],
+				    "requested channel counts would result in no RX or TX channel being configured");
 		goto out_ops;
 	}