@@ -595,6 +595,10 @@ static int mv3310_aneg_done(struct phy_device *phydev)
static void mv3310_update_interface(struct phy_device *phydev)
{
struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev);
+ phy_interface_t interface10g;
+
+ if (!phydev->link)
+ return;
/* In all of the "* with Rate Matching" modes the PHY interface is fixed
* at 10Gb. The PHY adapts the rate to actual wire speed with help of
@@ -610,38 +614,46 @@ static void mv3310_update_interface(struct phy_device *phydev)
case MV_V2_PORT_CTRL_MACTYPE_RXAUI_RATE_MATCH:
phydev->interface = PHY_INTERFACE_MODE_RXAUI;
return;
- default:
+ case MV_V2_PORT_CTRL_MACTYPE_USXGMII:
+ phydev->interface = PHY_INTERFACE_MODE_USXGMII;
+ return;
+ case MV_V2_PORT_CTRL_MACTYPE_10GBASER:
+ case MV_V2_PORT_CTRL_MACTYPE_10GBASER_NO_SGMII_AN:
+ interface10g = PHY_INTERFACE_MODE_10GBASER;
break;
+ case MV_V2_PORT_CTRL_MACTYPE_XAUI:
+ interface10g = PHY_INTERFACE_MODE_XAUI;
+ break;
+ case MV_V2_PORT_CTRL_MACTYPE_RXAUI:
+ interface10g = PHY_INTERFACE_MODE_RXAUI;
+ break;
+ default:
+ unreachable();
}
- if ((phydev->interface == PHY_INTERFACE_MODE_SGMII ||
- phydev->interface == PHY_INTERFACE_MODE_2500BASEX ||
- phydev->interface == PHY_INTERFACE_MODE_10GBASER) &&
- phydev->link) {
- /* The PHY automatically switches its serdes interface (and
- * active PHYXS instance) between Cisco SGMII, 10GBase-R and
- * 2500BaseX modes according to the speed. Florian suggests
- * setting phydev->interface to communicate this to the MAC.
- * Only do this if we are already in one of the above modes.
- */
- switch (phydev->speed) {
- case SPEED_10000:
- phydev->interface = PHY_INTERFACE_MODE_10GBASER;
- break;
- case SPEED_5000:
- phydev->interface = PHY_INTERFACE_MODE_5GBASER;
- break;
- case SPEED_2500:
- phydev->interface = PHY_INTERFACE_MODE_2500BASEX;
- break;
- case SPEED_1000:
- case SPEED_100:
- case SPEED_10:
- phydev->interface = PHY_INTERFACE_MODE_SGMII;
- break;
- default:
- break;
- }
+ /* The PHY automatically switches its serdes interface (and active PHYXS
+ * instance) between Cisco SGMII, 2500BaseX, 5GBase-R and 10GBase-R /
+ * xaui / rxaui modes according to the speed.
+ * Florian suggests setting phydev->interface to communicate this to the
+ * MAC. Only do this if we are already in one of the above modes.
+ */
+ switch (phydev->speed) {
+ case SPEED_10000:
+ phydev->interface = interface10g;
+ break;
+ case SPEED_5000:
+ phydev->interface = PHY_INTERFACE_MODE_5GBASER;
+ break;
+ case SPEED_2500:
+ phydev->interface = PHY_INTERFACE_MODE_2500BASEX;
+ break;
+ case SPEED_1000:
+ case SPEED_100:
+ case SPEED_10:
+ phydev->interface = PHY_INTERFACE_MODE_SGMII;
+ break;
+ default:
+ break;
}
}
Currently the only "changing" MACTYPE we support is when the PHY changes between 10gbase-r / 5gbase-r / 2500base-x / sgmii Add support for xaui / 5gbase-r / 2500base-x / sgmii rxaui / 5gbase-r / 2500base-x / sgmii Signed-off-by: Marek Behún <kabel@kernel.org> --- drivers/net/phy/marvell10g.c | 70 +++++++++++++++++++++--------------- 1 file changed, 41 insertions(+), 29 deletions(-)