diff mbox series

[net-next,v4,3/4] net: cdc_ncm: record speed in status method

Message ID 20210405231344.1403025-4-grundler@chromium.org (mailing list archive)
State Accepted
Commit eb47c274d8c44e1a1d7e44f9e82776e5adb5649b
Delegated to: Netdev Maintainers
Headers show
Series usbnet: speed reporting for devices without MDIO | expand

Checks

Context Check Description
netdev/cover_letter success Link
netdev/fixes_present success Link
netdev/patch_count success Link
netdev/tree_selection success Clearly marked for net-next
netdev/subject_prefix success Link
netdev/cc_maintainers warning 2 maintainers not CCed: oliver@neukum.org linux-usb@vger.kernel.org
netdev/source_inline success Was 0 now: 0
netdev/verify_signedoff success Link
netdev/module_param success Was 0 now: 0
netdev/build_32bit success Errors and warnings before: 0 this patch: 0
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/verify_fixes success Link
netdev/checkpatch warning WARNING: 'funtions' may be misspelled - perhaps 'functions'?
netdev/build_allmodconfig_warn success Errors and warnings before: 0 this patch: 0
netdev/header_inline success Link

Commit Message

Grant Grundler April 5, 2021, 11:13 p.m. UTC 
From: Oliver Neukum <oneukum@suse.com>

Until very recently, the usbnet framework only had support functions
for devices which reported the link speed by explicitly querying the
PHY over a MDIO interface. However, the cdc_ncm devices send
notifications when the link state or link speeds change and do not
expose the PHY (or modem) directly.

Support funtions (e.g. usbnet_get_link_ksettings_internal()) to directly
query state recorded by the cdc_ncm driver were added in a previous patch.

So instead of cdc_ncm spewing the link speed into the dmesg buffer,
record the link speed encoded in these notifications and tell the
usbnet framework to use the new functions to get link speed/state.
Link speed/state is now available via ethtool.

This is especially useful given all current RTL8156 devices emit
a connection/speed status notification every 32ms and this would
fill the dmesg buffer. This implementation replaces the one
recently submitted in de658a195ee23ca6aaffe197d1d2ea040beea0a2 :
   "net: usb: cdc_ncm: don't spew notifications"

v2: rebased on upstream
v3: changed variable names
v4: rewrote commit message

Signed-off-by: Oliver Neukum <oneukum@suse.com>
Tested-by: Roland Dreier <roland@kernel.org>
Signed-off-by: Grant Grundler <grundler@chromium.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
---
 drivers/net/usb/cdc_ncm.c | 55 ++++++++++++---------------------------
 1 file changed, 17 insertions(+), 38 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c
index 2644234d4c4d..6f330c7dcad2 100644
--- a/drivers/net/usb/cdc_ncm.c
+++ b/drivers/net/usb/cdc_ncm.c
@@ -133,17 +133,17 @@  static void cdc_ncm_get_strings(struct net_device __always_unused *netdev, u32 s
 static void cdc_ncm_update_rxtx_max(struct usbnet *dev, u32 new_rx, u32 new_tx);
 
 static const struct ethtool_ops cdc_ncm_ethtool_ops = {
-	.get_link          = usbnet_get_link,
-	.nway_reset        = usbnet_nway_reset,
-	.get_drvinfo       = usbnet_get_drvinfo,
-	.get_msglevel      = usbnet_get_msglevel,
-	.set_msglevel      = usbnet_set_msglevel,
-	.get_ts_info       = ethtool_op_get_ts_info,
-	.get_sset_count    = cdc_ncm_get_sset_count,
-	.get_strings       = cdc_ncm_get_strings,
-	.get_ethtool_stats = cdc_ncm_get_ethtool_stats,
-	.get_link_ksettings      = usbnet_get_link_ksettings_mii,
-	.set_link_ksettings      = usbnet_set_link_ksettings_mii,
+	.get_link		= usbnet_get_link,
+	.nway_reset		= usbnet_nway_reset,
+	.get_drvinfo		= usbnet_get_drvinfo,
+	.get_msglevel		= usbnet_get_msglevel,
+	.set_msglevel		= usbnet_set_msglevel,
+	.get_ts_info		= ethtool_op_get_ts_info,
+	.get_sset_count		= cdc_ncm_get_sset_count,
+	.get_strings		= cdc_ncm_get_strings,
+	.get_ethtool_stats	= cdc_ncm_get_ethtool_stats,
+	.get_link_ksettings	= usbnet_get_link_ksettings_internal,
+	.set_link_ksettings	= NULL,
 };
 
 static u32 cdc_ncm_check_rx_max(struct usbnet *dev, u32 new_rx)
@@ -1826,33 +1826,9 @@  static void
 cdc_ncm_speed_change(struct usbnet *dev,
 		     struct usb_cdc_speed_change *data)
 {
-	uint32_t rx_speed = le32_to_cpu(data->DLBitRRate);
-	uint32_t tx_speed = le32_to_cpu(data->ULBitRate);
-
-	/* if the speed hasn't changed, don't report it.
-	 * RTL8156 shipped before 2021 sends notification about every 32ms.
-	 */
-	if (dev->rx_speed == rx_speed && dev->tx_speed == tx_speed)
-		return;
-
-	dev->rx_speed = rx_speed;
-	dev->tx_speed = tx_speed;
-
-	/*
-	 * Currently the USB-NET API does not support reporting the actual
-	 * device speed. Do print it instead.
-	 */
-	if ((tx_speed > 1000000) && (rx_speed > 1000000)) {
-		netif_info(dev, link, dev->net,
-			   "%u mbit/s downlink %u mbit/s uplink\n",
-			   (unsigned int)(rx_speed / 1000000U),
-			   (unsigned int)(tx_speed / 1000000U));
-	} else {
-		netif_info(dev, link, dev->net,
-			   "%u kbit/s downlink %u kbit/s uplink\n",
-			   (unsigned int)(rx_speed / 1000U),
-			   (unsigned int)(tx_speed / 1000U));
-	}
+	/* RTL8156 shipped before 2021 sends notification about every 32ms. */
+	dev->rx_speed = le32_to_cpu(data->DLBitRRate);
+	dev->tx_speed = le32_to_cpu(data->ULBitRate);
 }
 
 static void cdc_ncm_status(struct usbnet *dev, struct urb *urb)
@@ -1878,6 +1854,9 @@  static void cdc_ncm_status(struct usbnet *dev, struct urb *urb)
 		 * USB_CDC_NOTIFY_NETWORK_CONNECTION notification shall be
 		 * sent by device after USB_CDC_NOTIFY_SPEED_CHANGE.
 		 */
+		/* RTL8156 shipped before 2021 sends notification about
+		 * every 32ms. Don't forward notification if state is same.
+		 */
 		if (netif_carrier_ok(dev->net) != !!event->wValue)
 			usbnet_link_change(dev, !!event->wValue, 0);
 		break;