diff mbox series

[net-next,v7,7/9] net: phy: Add support for microchip SMI0 MDIO bus

Message ID 20210426131911.25976-8-o.rempel@pengutronix.de (mailing list archive)
State Superseded
Delegated to: Netdev Maintainers
Headers show
Series microchip: add support for ksz88x3 driver family | expand

Checks

Context Check Description
netdev/cover_letter success Link
netdev/fixes_present success Link
netdev/patch_count success Link
netdev/tree_selection success Clearly marked for net-next
netdev/subject_prefix success Link
netdev/cc_maintainers warning 1 maintainers not CCed: hkallweit1@gmail.com
netdev/source_inline success Was 0 now: 0
netdev/verify_signedoff success Link
netdev/module_param success Was 0 now: 0
netdev/build_32bit success Errors and warnings before: 38 this patch: 38
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/verify_fixes success Link
netdev/checkpatch warning WARNING: DT compatible string "microchip,mdio-smi0" appears un-documented -- check ./Documentation/devicetree/bindings/
netdev/build_allmodconfig_warn success Errors and warnings before: 38 this patch: 38
netdev/header_inline success Link

Commit Message

Oleksij Rempel April 26, 2021, 1:19 p.m. UTC
From: Andrew Lunn <andrew@lunn.ch>

SMI0 is a mangled version of MDIO. The main low level difference is
the MDIO C22 OP code is always 0, not 0x2 or 0x1 for Read/Write. The
read/write information is instead encoded in the PHY address.

Extend the bit-bang code to allow the op code to be overridden, but
default to normal C22 values. Add an extra compatible to the mdio-gpio
driver, and when this compatible is present, set the op codes to 0.

A higher level driver, sitting on top of the basic MDIO bus driver can
then implement the rest of the microchip SMI0 odderties.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>

---
v1 -> v2: - patch not present
v2 -> v3: - first patch
v3 -> v4: - added override_c22_op
v4 -> v5: - moved override_c22_op out of else case
---
 drivers/net/mdio/mdio-bitbang.c | 8 ++++++--
 drivers/net/mdio/mdio-gpio.c    | 8 ++++++++
 include/linux/mdio-bitbang.h    | 3 +++
 3 files changed, 17 insertions(+), 2 deletions(-)

Comments

Florian Fainelli April 26, 2021, 6:23 p.m. UTC | #1
On 4/26/21 6:19 AM, Oleksij Rempel wrote:
> From: Andrew Lunn <andrew@lunn.ch>
> 
> SMI0 is a mangled version of MDIO. The main low level difference is
> the MDIO C22 OP code is always 0, not 0x2 or 0x1 for Read/Write. The
> read/write information is instead encoded in the PHY address.
> 
> Extend the bit-bang code to allow the op code to be overridden, but
> default to normal C22 values. Add an extra compatible to the mdio-gpio
> driver, and when this compatible is present, set the op codes to 0.
> 
> A higher level driver, sitting on top of the basic MDIO bus driver can
> then implement the rest of the microchip SMI0 odderties.
> 
> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
diff mbox series

Patch

diff --git a/drivers/net/mdio/mdio-bitbang.c b/drivers/net/mdio/mdio-bitbang.c
index 0f457c436335..07609114a26b 100644
--- a/drivers/net/mdio/mdio-bitbang.c
+++ b/drivers/net/mdio/mdio-bitbang.c
@@ -158,7 +158,7 @@  int mdiobb_read(struct mii_bus *bus, int phy, int reg)
 		reg = mdiobb_cmd_addr(ctrl, phy, reg);
 		mdiobb_cmd(ctrl, MDIO_C45_READ, phy, reg);
 	} else
-		mdiobb_cmd(ctrl, MDIO_READ, phy, reg);
+		mdiobb_cmd(ctrl, ctrl->op_c22_read, phy, reg);
 
 	ctrl->ops->set_mdio_dir(ctrl, 0);
 
@@ -190,7 +190,7 @@  int mdiobb_write(struct mii_bus *bus, int phy, int reg, u16 val)
 		reg = mdiobb_cmd_addr(ctrl, phy, reg);
 		mdiobb_cmd(ctrl, MDIO_C45_WRITE, phy, reg);
 	} else
-		mdiobb_cmd(ctrl, MDIO_WRITE, phy, reg);
+		mdiobb_cmd(ctrl, ctrl->op_c22_write, phy, reg);
 
 	/* send the turnaround (10) */
 	mdiobb_send_bit(ctrl, 1);
@@ -217,6 +217,10 @@  struct mii_bus *alloc_mdio_bitbang(struct mdiobb_ctrl *ctrl)
 	bus->read = mdiobb_read;
 	bus->write = mdiobb_write;
 	bus->priv = ctrl;
+	if (!ctrl->override_op_c22) {
+		ctrl->op_c22_read = MDIO_READ;
+		ctrl->op_c22_write = MDIO_WRITE;
+	}
 
 	return bus;
 }
diff --git a/drivers/net/mdio/mdio-gpio.c b/drivers/net/mdio/mdio-gpio.c
index 56c8f914f893..0fb3c2de0845 100644
--- a/drivers/net/mdio/mdio-gpio.c
+++ b/drivers/net/mdio/mdio-gpio.c
@@ -132,6 +132,13 @@  static struct mii_bus *mdio_gpio_bus_init(struct device *dev,
 		new_bus->phy_ignore_ta_mask = pdata->phy_ignore_ta_mask;
 	}
 
+	if (dev->of_node &&
+	    of_device_is_compatible(dev->of_node, "microchip,mdio-smi0")) {
+		bitbang->ctrl.op_c22_read = 0;
+		bitbang->ctrl.op_c22_write = 0;
+		bitbang->ctrl.override_op_c22 = 1;
+	}
+
 	dev_set_drvdata(dev, new_bus);
 
 	return new_bus;
@@ -196,6 +203,7 @@  static int mdio_gpio_remove(struct platform_device *pdev)
 
 static const struct of_device_id mdio_gpio_of_match[] = {
 	{ .compatible = "virtual,mdio-gpio", },
+	{ .compatible = "microchip,mdio-smi0" },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, mdio_gpio_of_match);
diff --git a/include/linux/mdio-bitbang.h b/include/linux/mdio-bitbang.h
index aca4dc037b70..373630fe5c28 100644
--- a/include/linux/mdio-bitbang.h
+++ b/include/linux/mdio-bitbang.h
@@ -33,6 +33,9 @@  struct mdiobb_ops {
 
 struct mdiobb_ctrl {
 	const struct mdiobb_ops *ops;
+	unsigned int override_op_c22;
+	u8 op_c22_read;
+	u8 op_c22_write;
 };
 
 int mdiobb_read(struct mii_bus *bus, int phy, int reg);