From patchwork Wed May 5 09:20:20 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Oleksij Rempel X-Patchwork-Id: 12239453 X-Patchwork-Delegate: kuba@kernel.org Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-16.8 required=3.0 tests=BAYES_00, HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_CR_TRAILER,INCLUDES_PATCH, MAILING_LIST_MULTI,SPF_HELO_NONE,SPF_PASS,URIBL_BLOCKED,USER_AGENT_GIT autolearn=ham autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 20DB5C433ED for ; Wed, 5 May 2021 09:22:17 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id DF08C613D8 for ; Wed, 5 May 2021 09:22:16 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S232877AbhEEJXL (ORCPT ); Wed, 5 May 2021 05:23:11 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:53604 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S232389AbhEEJWR (ORCPT ); Wed, 5 May 2021 05:22:17 -0400 Received: from metis.ext.pengutronix.de (metis.ext.pengutronix.de [IPv6:2001:67c:670:201:290:27ff:fe1d:cc33]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 745C8C06135E for ; Wed, 5 May 2021 02:20:40 -0700 (PDT) Received: from dude.hi.pengutronix.de ([2001:67c:670:100:1d::7]) by metis.ext.pengutronix.de with esmtps (TLS1.3:ECDHE_RSA_AES_256_GCM_SHA384:256) (Exim 4.92) (envelope-from ) id 1leDhn-0005Xf-1w; Wed, 05 May 2021 11:20:31 +0200 Received: from ore by dude.hi.pengutronix.de with local (Exim 4.92) (envelope-from ) id 1leDhj-0002fi-Tg; Wed, 05 May 2021 11:20:27 +0200 From: Oleksij Rempel To: Woojung Huh , UNGLinuxDriver@microchip.com, Andrew Lunn , Florian Fainelli , Vivien Didelot , Vladimir Oltean , "David S. Miller" , Jakub Kicinski Cc: Oleksij Rempel , kernel@pengutronix.de, netdev@vger.kernel.org, linux-kernel@vger.kernel.org, Russell King , Michael Grzeschik Subject: [RFC PATCH v1 4/9] net: phy: micrel: apply resume errata workaround for ksz8873 and ksz8863 Date: Wed, 5 May 2021 11:20:20 +0200 Message-Id: <20210505092025.8785-5-o.rempel@pengutronix.de> X-Mailer: git-send-email 2.29.2 In-Reply-To: <20210505092025.8785-1-o.rempel@pengutronix.de> References: <20210505092025.8785-1-o.rempel@pengutronix.de> MIME-Version: 1.0 X-SA-Exim-Connect-IP: 2001:67c:670:100:1d::7 X-SA-Exim-Mail-From: ore@pengutronix.de X-SA-Exim-Scanned: No (on metis.ext.pengutronix.de); SAEximRunCond expanded to false X-PTX-Original-Recipient: netdev@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: netdev@vger.kernel.org X-Patchwork-Delegate: kuba@kernel.org X-Patchwork-State: RFC The ksz8873 and ksz8863 switches are affected by following errata: | "Receiver error in 100BASE-TX mode following Soft Power Down" | | Some KSZ8873 devices may exhibit receiver errors after transitioning | from Soft Power Down mode to Normal mode, as controlled by register 195 | (0xC3) bits [1:0]. When exiting Soft Power Down mode, the receiver | blocks may not start up properly, causing the PHY to miss data and | exhibit erratic behavior. The problem may appear on either port 1 or | port 2, or both ports. The problem occurs only for 100BASE-TX, not | 10BASE-T. | | END USER IMPLICATIONS | When the failure occurs, the following symptoms are seen on the affected | port(s): | - The port is able to link | - LED0 blinks, even when there is no traffic | - The MIB counters indicate receive errors (Rx Fragments, Rx Symbol | Errors, Rx CRC Errors, Rx Alignment Errors) | - Only a small fraction of packets is correctly received and forwarded | through the switch. Most packets are dropped due to receive errors. | | The failing condition cannot be corrected by the following: | - Removing and reconnecting the cable | - Hardware reset | - Software Reset and PCS Reset bits in register 67 (0x43) | | Work around: | The problem can be corrected by setting and then clearing the Port Power | Down bits (registers 29 (0x1D) and 45 (0x2D), bit 3). This must be done | separately for each affected port after returning from Soft Power Down | Mode to Normal Mode. The following procedure will ensure no further | issues due to this erratum. To enter Soft Power Down Mode, set register | 195 (0xC3), bits [1:0] = 10. | | To exit Soft Power Down Mode, follow these steps: | 1. Set register 195 (0xC3), bits [1:0] = 00 // Exit soft power down mode | 2. Wait 1ms minimum | 3. Set register 29 (0x1D), bit [3] = 1 // Enter PHY port 1 power down mode | 4. Set register 29 (0x1D), bit [3] = 0 // Exit PHY port 1 power down mode | 5. Set register 45 (0x2D), bit [3] = 1 // Enter PHY port 2 power down mode | 6. Set register 45 (0x2D), bit [3] = 0 // Exit PHY port 2 power down mode This patch implements steps 2...6 of the suggested workaround. The first step needs to be implemented in the switch driver. Signed-off-by: Oleksij Rempel --- drivers/net/phy/micrel.c | 22 +++++++++++++++++++++- 1 file changed, 21 insertions(+), 1 deletion(-) diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c index 227d88db7d27..f03188ed953a 100644 --- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -1048,6 +1048,26 @@ static int ksz8873mll_config_aneg(struct phy_device *phydev) return 0; } +static int ksz886x_resume(struct phy_device *phydev) +{ + int ret; + + /* Apply errata workaround for KSZ8863 and KSZ8873: + * Receiver error in 100BASE-TX mode following Soft Power Down + * + * When exiting Soft Power Down mode, the receiver blocks may not start + * up properly, causing the PHY to miss data and exhibit erratic + * behavior. + */ + usleep_range(1000, 2000); + + ret = phy_set_bits(phydev, MII_BMCR, BMCR_PDOWN); + if (ret) + return ret; + + return phy_clear_bits(phydev, MII_BMCR, BMCR_PDOWN); +} + static int kszphy_get_sset_count(struct phy_device *phydev) { return ARRAY_SIZE(kszphy_hw_stats); @@ -1401,7 +1421,7 @@ static struct phy_driver ksphy_driver[] = { /* PHY_BASIC_FEATURES */ .config_init = kszphy_config_init, .suspend = genphy_suspend, - .resume = genphy_resume, + .resume = ksz886x_resume, }, { .name = "Micrel KSZ87XX Switch", /* PHY_BASIC_FEATURES */