From patchwork Wed May 5 09:20:21 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Oleksij Rempel X-Patchwork-Id: 12239459 X-Patchwork-Delegate: kuba@kernel.org Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-13.9 required=3.0 tests=BAYES_00, HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_CR_TRAILER,INCLUDES_PATCH, MAILING_LIST_MULTI,SPF_HELO_NONE,SPF_PASS,UNWANTED_LANGUAGE_BODY, URIBL_BLOCKED,USER_AGENT_GIT autolearn=ham autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 46A98C43460 for ; Wed, 5 May 2021 09:22:23 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 17AD3613E9 for ; Wed, 5 May 2021 09:22:23 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S232516AbhEEJXR (ORCPT ); Wed, 5 May 2021 05:23:17 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:53620 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S232658AbhEEJWT (ORCPT ); Wed, 5 May 2021 05:22:19 -0400 Received: from metis.ext.pengutronix.de (metis.ext.pengutronix.de [IPv6:2001:67c:670:201:290:27ff:fe1d:cc33]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 840E1C061362 for ; Wed, 5 May 2021 02:20:40 -0700 (PDT) Received: from dude.hi.pengutronix.de ([2001:67c:670:100:1d::7]) by metis.ext.pengutronix.de with esmtps (TLS1.3:ECDHE_RSA_AES_256_GCM_SHA384:256) (Exim 4.92) (envelope-from ) id 1leDhn-0005Xg-1r; Wed, 05 May 2021 11:20:31 +0200 Received: from ore by dude.hi.pengutronix.de with local (Exim 4.92) (envelope-from ) id 1leDhj-0002gL-Uh; Wed, 05 May 2021 11:20:27 +0200 From: Oleksij Rempel To: Woojung Huh , UNGLinuxDriver@microchip.com, Andrew Lunn , Florian Fainelli , Vivien Didelot , Vladimir Oltean , "David S. Miller" , Jakub Kicinski Cc: Oleksij Rempel , kernel@pengutronix.de, netdev@vger.kernel.org, linux-kernel@vger.kernel.org, Russell King , Michael Grzeschik Subject: [RFC PATCH v1 5/9] net: phy: micrel: ksz886x add MDI-X support Date: Wed, 5 May 2021 11:20:21 +0200 Message-Id: <20210505092025.8785-6-o.rempel@pengutronix.de> X-Mailer: git-send-email 2.29.2 In-Reply-To: <20210505092025.8785-1-o.rempel@pengutronix.de> References: <20210505092025.8785-1-o.rempel@pengutronix.de> MIME-Version: 1.0 X-SA-Exim-Connect-IP: 2001:67c:670:100:1d::7 X-SA-Exim-Mail-From: ore@pengutronix.de X-SA-Exim-Scanned: No (on metis.ext.pengutronix.de); SAEximRunCond expanded to false X-PTX-Original-Recipient: netdev@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: netdev@vger.kernel.org X-Patchwork-Delegate: kuba@kernel.org X-Patchwork-State: RFC Add support for MDI-X status and configuration Signed-off-by: Oleksij Rempel --- drivers/net/phy/micrel.c | 101 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 101 insertions(+) diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c index f03188ed953a..ea30cd6bd7bc 100644 --- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -28,6 +28,19 @@ #include #include +/* Device specific MII_BMCR (Reg 0) bits */ +/* 1 = HP Auto MDI/MDI-X mode, 0 = Microchip Auto MDI/MDI-X mode */ +#define KSZ886X_BMCR_HP_MDIX BIT(5) +/* 1 = Force MDI (transmit on RXP/RXM pins), 0 = Normal operation + * (transmit on TXP/TXM pins) + */ +#define KSZ886X_BMCR_FORCE_MDI BIT(4) +/* 1 = Disable auto MDI-X */ +#define KSZ886X_BMCR_DISABLE_AUTO_MDIX BIT(3) +#define KSZ886X_BMCR_DISABLE_FAR_END_FAULT BIT(2) +#define KSZ886X_BMCR_DISABLE_TRANSMIT BIT(1) +#define KSZ886X_BMCR_DISABLE_LED BIT(0) + /* Operation Mode Strap Override */ #define MII_KSZPHY_OMSO 0x16 #define KSZPHY_OMSO_FACTORY_TEST BIT(15) @@ -62,6 +75,7 @@ /* bitmap of PHY register to set interrupt mode */ #define KSZPHY_CTRL_INT_ACTIVE_HIGH BIT(9) #define KSZPHY_RMII_REF_CLK_SEL BIT(7) +#define KSZ886X_CTRL_MDIX_STAT BIT(4) /* Write/read to/from extended registers */ #define MII_KSZPHY_EXTREG 0x0b @@ -1048,6 +1062,91 @@ static int ksz8873mll_config_aneg(struct phy_device *phydev) return 0; } +static int ksz886x_config_mdix(struct phy_device *phydev, u8 ctrl) +{ + u16 val; + + switch (ctrl) { + case ETH_TP_MDI: + val = KSZ886X_BMCR_DISABLE_AUTO_MDIX; + break; + case ETH_TP_MDI_X: + /* Note: The naming of the bit KSZ886X_BMCR_FORCE_MDI is bit + * counter intuitive, the "-X" in "1 = Force MDI" in the data + * sheet seems to be missing: + * 1 = Force MDI (sic!) (transmit on RX+/RX- pins) + * 0 = Normal operation (transmit on TX+/TX- pins) + */ + val = KSZ886X_BMCR_DISABLE_AUTO_MDIX | KSZ886X_BMCR_FORCE_MDI; + break; + case ETH_TP_MDI_AUTO: + val = 0; + break; + default: + return 0; + } + + return phy_modify(phydev, MII_BMCR, + KSZ886X_BMCR_HP_MDIX | KSZ886X_BMCR_FORCE_MDI | + KSZ886X_BMCR_DISABLE_AUTO_MDIX, + KSZ886X_BMCR_HP_MDIX | val); +} + +static int ksz886x_config_aneg(struct phy_device *phydev) +{ + int ret; + + ret = genphy_config_aneg(phydev); + if (ret) + return ret; + + /* The MDI-X configuration is automatically changed by the PHY after + * switching from autoneg off to on. So, take MDI-X configuration under + * own control and set it after autoneg configuration was done. + */ + return ksz886x_config_mdix(phydev, phydev->mdix_ctrl); +} + +static int ksz886x_mdix_update(struct phy_device *phydev) +{ + int ret; + + ret = phy_read(phydev, MII_BMCR); + if (ret < 0) + return ret; + + if (ret & KSZ886X_BMCR_DISABLE_AUTO_MDIX) { + if (ret & KSZ886X_BMCR_FORCE_MDI) + phydev->mdix_ctrl = ETH_TP_MDI_X; + else + phydev->mdix_ctrl = ETH_TP_MDI; + } else { + phydev->mdix_ctrl = ETH_TP_MDI_AUTO; + } + + ret = phy_read(phydev, MII_KSZPHY_CTRL); + if (ret < 0) + return ret; + + if (ret & KSZ886X_CTRL_MDIX_STAT) + phydev->mdix = ETH_TP_MDI; + else + phydev->mdix = ETH_TP_MDI_X; + + return 0; +} + +static int ksz886x_read_status(struct phy_device *phydev) +{ + int ret; + + ret = ksz886x_mdix_update(phydev); + if (ret < 0) + return ret; + + return genphy_read_status(phydev); +} + static int ksz886x_resume(struct phy_device *phydev) { int ret; @@ -1420,6 +1519,8 @@ static struct phy_driver ksphy_driver[] = { .name = "Micrel KSZ8851 Ethernet MAC or KSZ886X Switch", /* PHY_BASIC_FEATURES */ .config_init = kszphy_config_init, + .config_aneg = ksz886x_config_aneg, + .read_status = ksz886x_read_status, .suspend = genphy_suspend, .resume = ksz886x_resume, }, {