diff mbox series

[net-next] net: Treat __napi_schedule_irqoff() as __napi_schedule() on PREEMPT_RT

Message ID 20210512214324.hiaiw3e2tzmsygcz@linutronix.de (mailing list archive)
State Accepted
Commit 8380c81d5c4fced6f4397795a5ae65758272bbfd
Delegated to: Netdev Maintainers
Headers show
Series [net-next] net: Treat __napi_schedule_irqoff() as __napi_schedule() on PREEMPT_RT | expand

Checks

Context Check Description
netdev/cover_letter success Link
netdev/fixes_present success Link
netdev/patch_count success Link
netdev/tree_selection success Clearly marked for net-next
netdev/subject_prefix success Link
netdev/cc_maintainers warning 8 maintainers not CCed: daniel@iogearbox.net andriin@fb.com ast@kernel.org ap420073@gmail.com edumazet@google.com alobakin@pm.me atenart@kernel.org weiwan@google.com
netdev/source_inline success Was 0 now: 0
netdev/verify_signedoff success Link
netdev/module_param success Was 0 now: 0
netdev/build_32bit success Errors and warnings before: 6 this patch: 6
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/verify_fixes success Link
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 20 lines checked
netdev/build_allmodconfig_warn success Errors and warnings before: 6 this patch: 6
netdev/header_inline success Link

Commit Message

Sebastian Andrzej Siewior May 12, 2021, 9:43 p.m. UTC
__napi_schedule_irqoff() is an optimized version of __napi_schedule()
which can be used where it is known that interrupts are disabled,
e.g. in interrupt-handlers, spin_lock_irq() sections or hrtimer
callbacks.

On PREEMPT_RT enabled kernels this assumptions is not true. Force-
threaded interrupt handlers and spinlocks are not disabling interrupts
and the NAPI hrtimer callback is forced into softirq context which runs
with interrupts enabled as well.

Chasing all usage sites of __napi_schedule_irqoff() is a whack-a-mole
game so make __napi_schedule_irqoff() invoke __napi_schedule() for
PREEMPT_RT kernels.

The callers of ____napi_schedule() in the networking core have been
audited and are correct on PREEMPT_RT kernels as well.

Reported-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
---
Alternatively __napi_schedule_irqoff() could be #ifdef'ed out on RT and
an inline provided which invokes __napi_schedule().

This was not chosen as it creates #ifdeffery all over the place and with
the proposed solution the code reflects the documentation consistently
and in one obvious place.

 net/core/dev.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

Comments

Thomas Gleixner May 12, 2021, 10:28 p.m. UTC | #1
On Wed, May 12 2021 at 23:43, Sebastian Andrzej Siewior wrote:
> __napi_schedule_irqoff() is an optimized version of __napi_schedule()
> which can be used where it is known that interrupts are disabled,
> e.g. in interrupt-handlers, spin_lock_irq() sections or hrtimer
> callbacks.
>
> On PREEMPT_RT enabled kernels this assumptions is not true. Force-
> threaded interrupt handlers and spinlocks are not disabling interrupts
> and the NAPI hrtimer callback is forced into softirq context which runs
> with interrupts enabled as well.
>
> Chasing all usage sites of __napi_schedule_irqoff() is a whack-a-mole
> game so make __napi_schedule_irqoff() invoke __napi_schedule() for
> PREEMPT_RT kernels.
>
> The callers of ____napi_schedule() in the networking core have been
> audited and are correct on PREEMPT_RT kernels as well.
>
> Reported-by: Juri Lelli <juri.lelli@redhat.com>
> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

> ---
> Alternatively __napi_schedule_irqoff() could be #ifdef'ed out on RT and
> an inline provided which invokes __napi_schedule().
>
> This was not chosen as it creates #ifdeffery all over the place and with
> the proposed solution the code reflects the documentation consistently
> and in one obvious place.

Blame me for that decision.

No matter which variant we end up with, this needs to go into all stable
RT kernels ASAP.

Thanks,

        tglx
Steven Rostedt May 13, 2021, 12:50 a.m. UTC | #2
On Thu, 13 May 2021 00:28:02 +0200
Thomas Gleixner <tglx@linutronix.de> wrote:

> No matter which variant we end up with, this needs to go into all stable
> RT kernels ASAP.

Is this in rt-devel already?

I'll start pulling in whatever is in there.

-- Steve
Juri Lelli May 13, 2021, 5:12 a.m. UTC | #3
Hi,

On 12/05/21 23:43, Sebastian Andrzej Siewior wrote:
> __napi_schedule_irqoff() is an optimized version of __napi_schedule()
> which can be used where it is known that interrupts are disabled,
> e.g. in interrupt-handlers, spin_lock_irq() sections or hrtimer
> callbacks.
> 
> On PREEMPT_RT enabled kernels this assumptions is not true. Force-
> threaded interrupt handlers and spinlocks are not disabling interrupts
> and the NAPI hrtimer callback is forced into softirq context which runs
> with interrupts enabled as well.
> 
> Chasing all usage sites of __napi_schedule_irqoff() is a whack-a-mole
> game so make __napi_schedule_irqoff() invoke __napi_schedule() for
> PREEMPT_RT kernels.
> 
> The callers of ____napi_schedule() in the networking core have been
> audited and are correct on PREEMPT_RT kernels as well.
> 
> Reported-by: Juri Lelli <juri.lelli@redhat.com>
> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
> ---
> Alternatively __napi_schedule_irqoff() could be #ifdef'ed out on RT and
> an inline provided which invokes __napi_schedule().
> 
> This was not chosen as it creates #ifdeffery all over the place and with
> the proposed solution the code reflects the documentation consistently
> and in one obvious place.
> 
>  net/core/dev.c | 11 +++++++++--
>  1 file changed, 9 insertions(+), 2 deletions(-)
> 
> diff --git a/net/core/dev.c b/net/core/dev.c
> index 222b1d322c969..febb23708184e 100644
> --- a/net/core/dev.c
> +++ b/net/core/dev.c
> @@ -6501,11 +6501,18 @@ EXPORT_SYMBOL(napi_schedule_prep);
>   * __napi_schedule_irqoff - schedule for receive
>   * @n: entry to schedule
>   *
> - * Variant of __napi_schedule() assuming hard irqs are masked
> + * Variant of __napi_schedule() assuming hard irqs are masked.
> + *
> + * On PREEMPT_RT enabled kernels this maps to __napi_schedule()
> + * because the interrupt disabled assumption might not be true
> + * due to force-threaded interrupts and spinlock substitution.
>   */
>  void __napi_schedule_irqoff(struct napi_struct *n)
>  {
> -	____napi_schedule(this_cpu_ptr(&softnet_data), n);
> +	if (!IS_ENABLED(CONFIG_PREEMPT_RT))
> +		____napi_schedule(this_cpu_ptr(&softnet_data), n);
> +	else
> +		__napi_schedule(n);
>  }
>  EXPORT_SYMBOL(__napi_schedule_irqoff);

Thanks for the patch!

Reviewed-by: Juri Lelli <juri.lelli@redhat.com>

Best,
Juri
Steven Rostedt May 13, 2021, 4:43 p.m. UTC | #4
On Wed, 12 May 2021 20:50:46 -0400
Steven Rostedt <rostedt@goodmis.org> wrote:

> On Thu, 13 May 2021 00:28:02 +0200
> Thomas Gleixner <tglx@linutronix.de> wrote:
> 
> > No matter which variant we end up with, this needs to go into all stable
> > RT kernels ASAP.  
> 
> Is this in rt-devel already?
> 
> I'll start pulling in whatever is in there.

I don't see this in the rt-devel tree. The stable-rt releases always pull
from there (following the stable vs mainline relationship).

Is there going to be a new rt-devel release?

-- Steve
patchwork-bot+netdevbpf@kernel.org May 13, 2021, 8:20 p.m. UTC | #5
Hello:

This patch was applied to netdev/net-next.git (refs/heads/master):

On Wed, 12 May 2021 23:43:24 +0200 you wrote:
> __napi_schedule_irqoff() is an optimized version of __napi_schedule()
> which can be used where it is known that interrupts are disabled,
> e.g. in interrupt-handlers, spin_lock_irq() sections or hrtimer
> callbacks.
> 
> On PREEMPT_RT enabled kernels this assumptions is not true. Force-
> threaded interrupt handlers and spinlocks are not disabling interrupts
> and the NAPI hrtimer callback is forced into softirq context which runs
> with interrupts enabled as well.
> 
> [...]

Here is the summary with links:
  - [net-next] net: Treat __napi_schedule_irqoff() as __napi_schedule() on PREEMPT_RT
    https://git.kernel.org/netdev/net-next/c/8380c81d5c4f

You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html
Thomas Gleixner May 14, 2021, 12:11 p.m. UTC | #6
On Thu, May 13 2021 at 12:43, Steven Rostedt wrote:
> On Wed, 12 May 2021 20:50:46 -0400
> Steven Rostedt <rostedt@goodmis.org> wrote:
>
>> On Thu, 13 May 2021 00:28:02 +0200
>> Thomas Gleixner <tglx@linutronix.de> wrote:
>> 
>> > No matter which variant we end up with, this needs to go into all stable
>> > RT kernels ASAP.  
>> 
>> Is this in rt-devel already?
>> 
>> I'll start pulling in whatever is in there.
>
> I don't see this in the rt-devel tree. The stable-rt releases always pull
> from there (following the stable vs mainline relationship).
>
> Is there going to be a new rt-devel release?

Once we have time to work on it.

The patch got applied to net-next, so please pick it up from there.

Thanks,

        tglx
Jakub Kicinski May 14, 2021, 6:56 p.m. UTC | #7
On Thu, 13 May 2021 00:28:02 +0200 Thomas Gleixner wrote:
> On Wed, May 12 2021 at 23:43, Sebastian Andrzej Siewior wrote:
> > __napi_schedule_irqoff() is an optimized version of __napi_schedule()
> > which can be used where it is known that interrupts are disabled,
> > e.g. in interrupt-handlers, spin_lock_irq() sections or hrtimer
> > callbacks.
> >
> > On PREEMPT_RT enabled kernels this assumptions is not true. Force-
> > threaded interrupt handlers and spinlocks are not disabling interrupts
> > and the NAPI hrtimer callback is forced into softirq context which runs
> > with interrupts enabled as well.
> >
> > Chasing all usage sites of __napi_schedule_irqoff() is a whack-a-mole
> > game so make __napi_schedule_irqoff() invoke __napi_schedule() for
> > PREEMPT_RT kernels.
> >
> > The callers of ____napi_schedule() in the networking core have been
> > audited and are correct on PREEMPT_RT kernels as well.
> >
> > Reported-by: Juri Lelli <juri.lelli@redhat.com>
> > Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>  
> 
> Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
> 
> > ---
> > Alternatively __napi_schedule_irqoff() could be #ifdef'ed out on RT and
> > an inline provided which invokes __napi_schedule().
> >
> > This was not chosen as it creates #ifdeffery all over the place and with
> > the proposed solution the code reflects the documentation consistently
> > and in one obvious place.  
> 
> Blame me for that decision.
> 
> No matter which variant we end up with, this needs to go into all stable
> RT kernels ASAP.

Mumble mumble. I thought we concluded that drivers used on RT can be
fixed, we've already done it for a couple drivers (by which I mean two).
If all the IRQ handler is doing is scheduling NAPI (which it is for
modern NICs) - IRQF_NO_THREAD seems like the right option.

Is there any driver you care about that we can convert to using
IRQF_NO_THREAD so we can have new drivers to "do the right thing"
while the old ones depend on this workaround for now?


Another thing while I have your attention - ____napi_schedule() does
__raise_softirq_irqoff() which AFAIU does not wake the ksoftirq thread.
On non-RT we get occasional NOHZ warnings when drivers schedule napi
from process context, but on RT this is even more of a problem, right?
ksoftirqd won't run until something else actually wakes it up?
Alison Chaiken May 14, 2021, 7:44 p.m. UTC | #8
On Fri, May 14, 2021 at 11:56 AM Jakub Kicinski <kuba@kernel.org> wrote:
>
> On Thu, 13 May 2021 00:28:02 +0200 Thomas Gleixner wrote:
> > On Wed, May 12 2021 at 23:43, Sebastian Andrzej Siewior wrote:
> > > __napi_schedule_irqoff() is an optimized version of __napi_schedule()
> > > which can be used where it is known that interrupts are disabled,
> > > e.g. in interrupt-handlers, spin_lock_irq() sections or hrtimer
> > > callbacks.
> > >
> > > On PREEMPT_RT enabled kernels this assumptions is not true. Force-
> > > threaded interrupt handlers and spinlocks are not disabling interrupts
> > > and the NAPI hrtimer callback is forced into softirq context which runs
> > > with interrupts enabled as well.
> > >
> > > Chasing all usage sites of __napi_schedule_irqoff() is a whack-a-mole
> > > game so make __napi_schedule_irqoff() invoke __napi_schedule() for
> > > PREEMPT_RT kernels.
> > >
> > > The callers of ____napi_schedule() in the networking core have been
> > > audited and are correct on PREEMPT_RT kernels as well.
> > >
> > > Reported-by: Juri Lelli <juri.lelli@redhat.com>
> > > Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
> >
> > Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
> >
> > > ---
> > > Alternatively __napi_schedule_irqoff() could be #ifdef'ed out on RT and
> > > an inline provided which invokes __napi_schedule().
> > >
> > > This was not chosen as it creates #ifdeffery all over the place and with
> > > the proposed solution the code reflects the documentation consistently
> > > and in one obvious place.
> >
> > Blame me for that decision.
> >
> > No matter which variant we end up with, this needs to go into all stable
> > RT kernels ASAP.
>
> Mumble mumble. I thought we concluded that drivers used on RT can be
> fixed, we've already done it for a couple drivers (by which I mean two).
> If all the IRQ handler is doing is scheduling NAPI (which it is for
> modern NICs) - IRQF_NO_THREAD seems like the right option.
>
> Is there any driver you care about that we can convert to using
> IRQF_NO_THREAD so we can have new drivers to "do the right thing"
> while the old ones depend on this workaround for now?
>
>
> Another thing while I have your attention - ____napi_schedule() does
> __raise_softirq_irqoff() which AFAIU does not wake the ksoftirq thread.
> On non-RT we get occasional NOHZ warnings when drivers schedule napi
> from process context, but on RT this is even more of a problem, right?
> ksoftirqd won't run until something else actually wakes it up?

By "NOHZ warnings," do you mean "NOHZ: local_softirq_pending"?    We see
that message about once a week with 4.19.   Presumably any failure of
____napi_schedule() to wake ksoftirqd could only cause problems for the
NET_RX softirq, so if the pending softirq is different, the cause lies
elsewhere.

-- Alison Chaiken
   Aurora Innovation
Thomas Gleixner May 14, 2021, 8:16 p.m. UTC | #9
On Fri, May 14 2021 at 11:56, Jakub Kicinski wrote:
> On Thu, 13 May 2021 00:28:02 +0200 Thomas Gleixner wrote:
>> > ---
>> > Alternatively __napi_schedule_irqoff() could be #ifdef'ed out on RT and
>> > an inline provided which invokes __napi_schedule().
>> >
>> > This was not chosen as it creates #ifdeffery all over the place and with
>> > the proposed solution the code reflects the documentation consistently
>> > and in one obvious place.  
>> 
>> Blame me for that decision.
>> 
>> No matter which variant we end up with, this needs to go into all stable
>> RT kernels ASAP.
>
> Mumble mumble. I thought we concluded that drivers used on RT can be
> fixed, we've already done it for a couple drivers (by which I mean two).
> If all the IRQ handler is doing is scheduling NAPI (which it is for
> modern NICs) - IRQF_NO_THREAD seems like the right option.

Yes. That works, but there are a bunch which do more than that IIRC.

> Is there any driver you care about that we can convert to using
> IRQF_NO_THREAD so we can have new drivers to "do the right thing"
> while the old ones depend on this workaround for now?

The start of this thread was about i40e_msix_clean_rings() which
probably falls under the IRQF_NO_THREAD category, but I'm sure that
there are others. So I chose the safe way for RT for now.

> Another thing while I have your attention - ____napi_schedule() does
> __raise_softirq_irqoff() which AFAIU does not wake the ksoftirq thread.
> On non-RT we get occasional NOHZ warnings when drivers schedule napi
> from process context, but on RT this is even more of a problem, right?
> ksoftirqd won't run until something else actually wakes it up?

Correct. I sent a patch for the r8152 usb network driver today which
suffers from that problem. :)

As I said there, we want a (debug/lockdep) check in __napi_schedule()
whether soft interrupts are disabled, but let me have a look whether
that check might make more sense directly in __raise_softirq_irqoff().

Thanks,

        tglx
Jakub Kicinski May 14, 2021, 8:38 p.m. UTC | #10
On Fri, 14 May 2021 22:16:10 +0200 Thomas Gleixner wrote:
> On Fri, May 14 2021 at 11:56, Jakub Kicinski wrote:
> > On Thu, 13 May 2021 00:28:02 +0200 Thomas Gleixner wrote:  
> >> Blame me for that decision.
> >> 
> >> No matter which variant we end up with, this needs to go into all stable
> >> RT kernels ASAP.  
> >
> > Mumble mumble. I thought we concluded that drivers used on RT can be
> > fixed, we've already done it for a couple drivers (by which I mean two).
> > If all the IRQ handler is doing is scheduling NAPI (which it is for
> > modern NICs) - IRQF_NO_THREAD seems like the right option.  
> 
> Yes. That works, but there are a bunch which do more than that IIRC.
> 
> > Is there any driver you care about that we can convert to using
> > IRQF_NO_THREAD so we can have new drivers to "do the right thing"
> > while the old ones depend on this workaround for now?  
> 
> The start of this thread was about i40e_msix_clean_rings() which
> probably falls under the IRQF_NO_THREAD category, but I'm sure that
> there are others. So I chose the safe way for RT for now.

Sounds reasonable. I'll send a patch with a new helper and convert 
an example driver I'm sure falls into the "napi_schedule(); return;"
category. I just want to make sure "the right thing to do" is
accessible for people writing new drivers.
Thomas Gleixner May 14, 2021, 9:53 p.m. UTC | #11
On Fri, May 14 2021 at 12:44, Alison Chaiken wrote:
> On Fri, May 14, 2021 at 11:56 AM Jakub Kicinski <kuba@kernel.org> wrote:
>>
>> Another thing while I have your attention - ____napi_schedule() does
>> __raise_softirq_irqoff() which AFAIU does not wake the ksoftirq thread.
>> On non-RT we get occasional NOHZ warnings when drivers schedule napi
>> from process context, but on RT this is even more of a problem, right?
>> ksoftirqd won't run until something else actually wakes it up?
>
> By "NOHZ warnings," do you mean "NOHZ: local_softirq_pending"?    We see
> that message about once a week with 4.19.   Presumably any failure of
> ____napi_schedule() to wake ksoftirqd could only cause problems for the
> NET_RX softirq, so if the pending softirq is different, the cause lies
> elsewhere.

If you read the above carefully you might notice that this _IS_ about
____napi_schedule() being invoked from task context which raises NET_RX
and then results in pending 08! which is NET_RX.

Thanks,

        tglx
diff mbox series

Patch

diff --git a/net/core/dev.c b/net/core/dev.c
index 222b1d322c969..febb23708184e 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -6501,11 +6501,18 @@  EXPORT_SYMBOL(napi_schedule_prep);
  * __napi_schedule_irqoff - schedule for receive
  * @n: entry to schedule
  *
- * Variant of __napi_schedule() assuming hard irqs are masked
+ * Variant of __napi_schedule() assuming hard irqs are masked.
+ *
+ * On PREEMPT_RT enabled kernels this maps to __napi_schedule()
+ * because the interrupt disabled assumption might not be true
+ * due to force-threaded interrupts and spinlock substitution.
  */
 void __napi_schedule_irqoff(struct napi_struct *n)
 {
-	____napi_schedule(this_cpu_ptr(&softnet_data), n);
+	if (!IS_ENABLED(CONFIG_PREEMPT_RT))
+		____napi_schedule(this_cpu_ptr(&softnet_data), n);
+	else
+		__napi_schedule(n);
 }
 EXPORT_SYMBOL(__napi_schedule_irqoff);