| Message ID | 20210529110556.202531-3-pgwipeout@gmail.com (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | 0cc8bddb5b0665283baba6d89684630663c0ccbd |
| Delegated to: | Netdev Maintainers |
| Headers | show |
| Series | fixes for yt8511 phy driver | expand |
| Context | Check | Description |
|---|---|---|
| netdev/cover_letter | success | Link |
| netdev/fixes_present | success | Link |
| netdev/patch_count | success | Link |
| netdev/tree_selection | success | Guessed tree name to be net-next |
| netdev/subject_prefix | warning | Target tree name not specified in the subject |
| netdev/cc_maintainers | warning | 1 maintainers not CCed: ndesaulniers@google.com |
| netdev/source_inline | success | Was 0 now: 0 |
| netdev/verify_signedoff | success | Link |
| netdev/module_param | success | Was 0 now: 0 |
| netdev/build_32bit | success | Errors and warnings before: 0 this patch: 0 |
| netdev/kdoc | success | Errors and warnings before: 0 this patch: 0 |
| netdev/verify_fixes | success | Link |
| netdev/checkpatch | success | total: 0 errors, 0 warnings, 0 checks, 37 lines checked |
| netdev/build_allmodconfig_warn | success | Errors and warnings before: 0 this patch: 0 |
| netdev/header_inline | success | Link |
diff --git a/drivers/net/phy/motorcomm.c b/drivers/net/phy/motorcomm.c index 68cd19540c67..7e6ac2c5e27e 100644 --- a/drivers/net/phy/motorcomm.c +++ b/drivers/net/phy/motorcomm.c @@ -53,15 +53,10 @@ static int yt8511_config_init(struct phy_device *phydev) int oldpage, ret = 0; unsigned int ge, fe; - /* set clock mode to 125mhz */ oldpage = phy_select_page(phydev, YT8511_EXT_CLK_GATE); if (oldpage < 0) goto err_restore_page; - ret = __phy_modify(phydev, YT8511_PAGE, 0, YT8511_CLK_125M); - if (ret < 0) - goto err_restore_page; - /* set rgmii delay mode */ switch (phydev->interface) { case PHY_INTERFACE_MODE_RGMII: @@ -80,14 +75,20 @@ static int yt8511_config_init(struct phy_device *phydev) ge = YT8511_DELAY_RX | YT8511_DELAY_GE_TX_EN; fe = YT8511_DELAY_FE_TX_EN; break; - default: /* leave everything alone in other modes */ - break; + default: /* do not support other modes */ + ret = -EOPNOTSUPP; + goto err_restore_page; } ret = __phy_modify(phydev, YT8511_PAGE, (YT8511_DELAY_RX | YT8511_DELAY_GE_TX_EN), ge); if (ret < 0) goto err_restore_page; + /* set clock mode to 125mhz */ + ret = __phy_modify(phydev, YT8511_PAGE, 0, YT8511_CLK_125M); + if (ret < 0) + goto err_restore_page; + /* fast ethernet delay is in a separate page */ ret = __phy_write(phydev, YT8511_PAGE_SELECT, YT8511_EXT_DELAY_DRIVE); if (ret < 0)
While investigating the clang `ge` uninitialized variable report, it was discovered the default switch would have unintended consequences. Due to the switch to __phy_modify, the driver would modify the ID values in the default scenario. Fix this by promoting the interface mode switch and aborting when the mode is not a supported RGMII mode. This prevents the `ge` and `fe` variables from ever being used uninitialized. Fixes: 48e8c6f1612b ("net: phy: add driver for Motorcomm yt8511 phy") Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Peter Geis <pgwipeout@gmail.com> --- drivers/net/phy/motorcomm.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-)