@@ -1084,6 +1084,11 @@ static int b53_setup(struct dsa_switch *ds)
unsigned int port;
int ret;
+ /* Request bridge PVID untagged when DSA_TAG_PROTO_NONE is set
+ * which forces the CPU port to be tagged in all VLANs.
+ */
+ ds->untag_bridge_pvid = dev->tag_protocol == DSA_TAG_PROTO_NONE;
+
ret = b53_reset_switch(dev);
if (ret) {
dev_err(ds->dev, "failed to reset switch\n");
@@ -1455,6 +1460,13 @@ static int b53_vlan_prepare(struct dsa_switch *ds, int port,
return 0;
}
+static bool b53_vlan_port_needs_forced_tagged(struct dsa_switch *ds, int port)
+{
+ struct b53_device *dev = ds->priv;
+
+ return dev->tag_protocol == DSA_TAG_PROTO_NONE && dsa_is_cpu_port(ds, port);
+}
+
int b53_vlan_add(struct dsa_switch *ds, int port,
const struct switchdev_obj_port_vlan *vlan,
struct netlink_ext_ack *extack)
@@ -1477,7 +1489,7 @@ int b53_vlan_add(struct dsa_switch *ds, int port,
untagged = true;
vl->members |= BIT(port);
- if (untagged && !dsa_is_cpu_port(ds, port))
+ if (untagged && !b53_vlan_port_needs_forced_tagged(ds, port))
vl->untag |= BIT(port);
else
vl->untag &= ~BIT(port);
@@ -1514,7 +1526,7 @@ int b53_vlan_del(struct dsa_switch *ds, int port,
if (pvid == vlan->vid)
pvid = b53_default_pvid(dev);
- if (untagged && !dsa_is_cpu_port(ds, port))
+ if (untagged && !b53_vlan_port_needs_forced_tagged(ds, port))
vl->untag &= ~(BIT(port));
b53_set_vlan_entry(dev, vlan->vid, vl);
@@ -2660,7 +2672,6 @@ struct b53_device *b53_switch_alloc(struct device *base,
dev->priv = priv;
dev->ops = ops;
ds->ops = &b53_switch_ops;
- ds->untag_bridge_pvid = true;
dev->vlan_enabled = true;
/* Let DSA handle the case were multiple bridges span the same switch
* device and different VLAN awareness settings are requested, which
Commit ca8931948344 ("net: dsa: b53: Keep CPU port as tagged in all VLANs") forced the CPU port to be always tagged in any VLAN membership. This was necessary back then because we did not support Broadcom tags for all configurations so the only way to differentiate tagged and untagged traffic while DSA_TAG_PROTO_NONE was used was to force the CPU port into being always tagged. With most configurations enabling Broadcom tags, especially after 8fab459e69ab ("net: dsa: b53: Enable Broadcom tags for 531x5/539x families") we do not need to apply this unconditional force tagging of the CPU port in all VLANs. A helper function is introduced to faciliate the encapsulation of the specific condition requiring the CPU port to be tagged in all VLANs and the dsa_switch_ops::untag_bridge_pvid boolean is moved to when dsa_switch_ops::setup is called when we have already determined the tagging protocol we will be using. Reported-by: Matthew Hagan <mnhagan88@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> --- Changes in v2: - properly deal with DSA_TAG_PROTO_NONE so we continue to support that mode on older chips like 5325 and 5365 until they gain Broadcom tag support drivers/net/dsa/b53/b53_common.c | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-)