diff mbox series

[v2,net-next,05/13] net: pcs: xpcs: add support for sgmii with no inband AN

Message ID 20210610181410.1886658-6-olteanv@gmail.com (mailing list archive)
State Superseded
Delegated to: Netdev Maintainers
Headers show
Series Port the SJA1105 DSA driver to XPCS | expand

Checks

Context Check Description
netdev/cover_letter success Link
netdev/fixes_present success Link
netdev/patch_count success Link
netdev/tree_selection success Clearly marked for net-next
netdev/subject_prefix success Link
netdev/cc_maintainers success CCed 7 of 7 maintainers
netdev/source_inline success Was 0 now: 0
netdev/verify_signedoff success Link
netdev/module_param success Was 0 now: 0
netdev/build_32bit success Errors and warnings before: 0 this patch: 0
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/verify_fixes success Link
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 71 lines checked
netdev/build_allmodconfig_warn success Errors and warnings before: 0 this patch: 0
netdev/header_inline success Link

Commit Message

Vladimir Oltean June 10, 2021, 6:14 p.m. UTC
From: Vladimir Oltean <vladimir.oltean@nxp.com>

In fixed-link use cases, the XPCS can disable the clause 37 in-band
autoneg process, disable the "Automatic Speed Mode Change after CL37 AN"
setting, and force operation in a speed dictated by management.

Add support for this operating mode.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
v1->v2: none

 drivers/net/pcs/pcs-xpcs.c | 41 +++++++++++++++++++++++++++++++++++---
 1 file changed, 38 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/pcs/pcs-xpcs.c b/drivers/net/pcs/pcs-xpcs.c
index 8ca7592b02ec..743b53734eeb 100644
--- a/drivers/net/pcs/pcs-xpcs.c
+++ b/drivers/net/pcs/pcs-xpcs.c
@@ -690,7 +690,7 @@  int xpcs_config_eee(struct dw_xpcs *xpcs, int mult_fact_100ns, int enable)
 }
 EXPORT_SYMBOL_GPL(xpcs_config_eee);
 
-static int xpcs_config_aneg_c37_sgmii(struct dw_xpcs *xpcs)
+static int xpcs_config_aneg_c37_sgmii(struct dw_xpcs *xpcs, unsigned int mode)
 {
 	int ret;
 
@@ -726,7 +726,10 @@  static int xpcs_config_aneg_c37_sgmii(struct dw_xpcs *xpcs)
 	if (ret < 0)
 		return ret;
 
-	ret |= DW_VR_MII_DIG_CTRL1_MAC_AUTO_SW;
+	if (phylink_autoneg_inband(mode))
+		ret |= DW_VR_MII_DIG_CTRL1_MAC_AUTO_SW;
+	else
+		ret &= ~DW_VR_MII_DIG_CTRL1_MAC_AUTO_SW;
 
 	return xpcs_write(xpcs, MDIO_MMD_VEND2, DW_VR_MII_DIG_CTRL1, ret);
 }
@@ -772,7 +775,7 @@  static int xpcs_do_config(struct dw_xpcs *xpcs, phy_interface_t interface,
 		}
 		break;
 	case DW_AN_C37_SGMII:
-		ret = xpcs_config_aneg_c37_sgmii(xpcs);
+		ret = xpcs_config_aneg_c37_sgmii(xpcs, mode);
 		if (ret)
 			return ret;
 		break;
@@ -905,6 +908,36 @@  static void xpcs_get_state(struct phylink_pcs *pcs,
 	}
 }
 
+static void xpcs_link_up_sgmii(struct dw_xpcs *xpcs, unsigned int mode,
+			       int speed, int duplex)
+{
+	int val, ret;
+
+	if (phylink_autoneg_inband(mode))
+		return;
+
+	switch (speed) {
+	case SPEED_1000:
+		val = BMCR_SPEED1000;
+		break;
+	case SPEED_100:
+		val = BMCR_SPEED100;
+		break;
+	case SPEED_10:
+		val = BMCR_SPEED10;
+		break;
+	default:
+		return;
+	}
+
+	if (duplex == DUPLEX_FULL)
+		val |= BMCR_FULLDPLX;
+
+	ret = xpcs_write(xpcs, MDIO_MMD_VEND2, MDIO_CTRL1, val);
+	if (ret)
+		pr_err("%s: xpcs_write returned %pe\n", __func__, ERR_PTR(ret));
+}
+
 static void xpcs_link_up(struct phylink_pcs *pcs, unsigned int mode,
 			 phy_interface_t interface, int speed, int duplex)
 {
@@ -912,6 +945,8 @@  static void xpcs_link_up(struct phylink_pcs *pcs, unsigned int mode,
 
 	if (interface == PHY_INTERFACE_MODE_USXGMII)
 		return xpcs_config_usxgmii(xpcs, speed);
+	if (interface == PHY_INTERFACE_MODE_SGMII)
+		return xpcs_link_up_sgmii(xpcs, mode, speed, duplex);
 }
 
 static u32 xpcs_get_id(struct dw_xpcs *xpcs)