| Message ID | 20210618025337.5705-2-zhangqing@loongson.cn (mailing list archive) |
|---|---|
| State | Accepted |
| Delegated to: | Netdev Maintainers |
| Headers | show |
| Series | [1/4] stmmac: pci: Add dwmac support for Loongson | expand |
| Context | Check | Description |
|---|---|---|
| netdev/tree_selection | success | Guessing tree name failed - patch did not apply |
> + gmac@3,1 { > + compatible = "pci0014,7a03.0", > + "pci0014,7a03", > + "pciclass0c0320", > + "pciclass0c03", > + "loongson, pci-gmac"; > + > + reg = <0x1900 0x0 0x0 0x0 0x0>; > + interrupts = <14 IRQ_TYPE_LEVEL_LOW>, > + <15 IRQ_TYPE_LEVEL_LOW>; > + interrupt-names = "macirq", "eth_lpi"; > + interrupt-parent = <&liointc0>; > + phy-mode = "rgmii"; rgmii? But you set PHY_INTERFACE_MODE_GMII? > + mdio { > + #address-cells = <1>; > + #size-cells = <0>; > + compatible = "snps,dwmac-mdio"; > + phy1: ethernet-phy@1 { > + reg = <0>; The value after the @ should match the reg value. Andrew
diff --git a/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi b/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi index 569e814def83..5747f171de29 100644 --- a/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi +++ b/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi @@ -114,6 +114,52 @@ pci@1a000000 { ranges = <0x01000000 0x0 0x00000000 0x0 0x18000000 0x0 0x00010000>, <0x02000000 0x0 0x40000000 0x0 0x40000000 0x0 0x40000000>; + gmac@3,0 { + compatible = "pci0014,7a03.0", + "pci0014,7a03", + "pciclass0c0320", + "pciclass0c03", + "loongson, pci-gmac"; + + reg = <0x1800 0x0 0x0 0x0 0x0>; + interrupts = <12 IRQ_TYPE_LEVEL_LOW>, + <13 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "macirq", "eth_lpi"; + interrupt-parent = <&liointc0>; + phy-mode = "rgmii"; + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; + }; + + gmac@3,1 { + compatible = "pci0014,7a03.0", + "pci0014,7a03", + "pciclass0c0320", + "pciclass0c03", + "loongson, pci-gmac"; + + reg = <0x1900 0x0 0x0 0x0 0x0>; + interrupts = <14 IRQ_TYPE_LEVEL_LOW>, + <15 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "macirq", "eth_lpi"; + interrupt-parent = <&liointc0>; + phy-mode = "rgmii"; + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + phy1: ethernet-phy@1 { + reg = <0>; + }; + }; + }; + ehci@4,1 { compatible = "pci0014,7a14.0", "pci0014,7a14",
The GMAC module is now supported, enable it. Signed-off-by: Qing Zhang <zhangqing@loongson.cn> --- .../boot/dts/loongson/loongson64-2k1000.dtsi | 46 +++++++++++++++++++ 1 file changed, 46 insertions(+)