| Message ID | 20210621221055.958628-1-f.fainelli@gmail.com (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | 64a81b24487f0d2fba0f033029eec2abc7d82cee |
| Delegated to: | Netdev Maintainers |
| Headers | show |
| Series | [net-next,v2] net: dsa: b53: Create default VLAN entry explicitly | expand |
| Context | Check | Description |
|---|---|---|
| netdev/cover_letter | success | Link |
| netdev/fixes_present | success | Link |
| netdev/patch_count | success | Link |
| netdev/tree_selection | success | Clearly marked for net-next |
| netdev/subject_prefix | success | Link |
| netdev/cc_maintainers | success | CCed 7 of 7 maintainers |
| netdev/source_inline | success | Was 0 now: 0 |
| netdev/verify_signedoff | success | Link |
| netdev/module_param | success | Was 0 now: 0 |
| netdev/build_32bit | success | Errors and warnings before: 0 this patch: 0 |
| netdev/kdoc | success | Errors and warnings before: 0 this patch: 0 |
| netdev/verify_fixes | success | Link |
| netdev/checkpatch | warning | WARNING: line length of 84 exceeds 80 columns |
| netdev/build_allmodconfig_warn | success | Errors and warnings before: 0 this patch: 0 |
| netdev/header_inline | success | Link |
On Mon, Jun 21, 2021 at 03:10:55PM -0700, Florian Fainelli wrote: > In case CONFIG_VLAN_8021Q is not set, there will be no call down to the > b53 driver to ensure that the default PVID VLAN entry will be configured > with the appropriate untagged attribute towards the CPU port. We were > implicitly relying on dsa_slave_vlan_rx_add_vid() to do that for us, > instead make it explicit. > > Reported-by: Vladimir Oltean <olteanv@gmail.com> > Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> > --- Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Hello: This patch was applied to netdev/net-next.git (refs/heads/master): On Mon, 21 Jun 2021 15:10:55 -0700 you wrote: > In case CONFIG_VLAN_8021Q is not set, there will be no call down to the > b53 driver to ensure that the default PVID VLAN entry will be configured > with the appropriate untagged attribute towards the CPU port. We were > implicitly relying on dsa_slave_vlan_rx_add_vid() to do that for us, > instead make it explicit. > > Reported-by: Vladimir Oltean <olteanv@gmail.com> > Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> > > [...] Here is the summary with links: - [net-next,v2] net: dsa: b53: Create default VLAN entry explicitly https://git.kernel.org/netdev/net-next/c/64a81b24487f You are awesome, thank you! -- Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html
diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c index 6e199454e41d..b23e3488695b 100644 --- a/drivers/net/dsa/b53/b53_common.c +++ b/drivers/net/dsa/b53/b53_common.c @@ -728,6 +728,13 @@ static u16 b53_default_pvid(struct b53_device *dev) return 0; } +static bool b53_vlan_port_needs_forced_tagged(struct dsa_switch *ds, int port) +{ + struct b53_device *dev = ds->priv; + + return dev->tag_protocol == DSA_TAG_PROTO_NONE && dsa_is_cpu_port(ds, port); +} + int b53_configure_vlan(struct dsa_switch *ds) { struct b53_device *dev = ds->priv; @@ -748,9 +755,20 @@ int b53_configure_vlan(struct dsa_switch *ds) b53_enable_vlan(dev, -1, dev->vlan_enabled, ds->vlan_filtering); - b53_for_each_port(dev, i) + /* Create an untagged VLAN entry for the default PVID in case + * CONFIG_VLAN_8021Q is disabled and there are no calls to + * dsa_slave_vlan_rx_add_vid() to create the default VLAN + * entry. Do this only when the tagging protocol is not + * DSA_TAG_PROTO_NONE + */ + b53_for_each_port(dev, i) { + v = &dev->vlans[def_vid]; + v->members |= BIT(i); + if (!b53_vlan_port_needs_forced_tagged(ds, i)) + v->untag = v->members; b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(i), def_vid); + } /* Upon initial call we have not set-up any VLANs, but upon * system resume, we need to restore all VLAN entries. @@ -1460,13 +1478,6 @@ static int b53_vlan_prepare(struct dsa_switch *ds, int port, return 0; } -static bool b53_vlan_port_needs_forced_tagged(struct dsa_switch *ds, int port) -{ - struct b53_device *dev = ds->priv; - - return dev->tag_protocol == DSA_TAG_PROTO_NONE && dsa_is_cpu_port(ds, port); -} - int b53_vlan_add(struct dsa_switch *ds, int port, const struct switchdev_obj_port_vlan *vlan, struct netlink_ext_ack *extack)
In case CONFIG_VLAN_8021Q is not set, there will be no call down to the b53 driver to ensure that the default PVID VLAN entry will be configured with the appropriate untagged attribute towards the CPU port. We were implicitly relying on dsa_slave_vlan_rx_add_vid() to do that for us, instead make it explicit. Reported-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> --- Changes in v2: - use b53_vlan_port_needs_forced_tagged() as suggested by Vladimir in his review drivers/net/dsa/b53/b53_common.c | 27 +++++++++++++++++++-------- 1 file changed, 19 insertions(+), 8 deletions(-)