diff mbox series

[v2,net-next,3/3] net: stmmac: ptp: update tas basetime after ptp adjust

Message ID 20210705102655.6280-4-xiaoliang.yang_1@nxp.com (mailing list archive)
State Accepted
Commit e9e3720002f61cd637a49ecafae77cac230eefae
Delegated to: Netdev Maintainers
Headers show
Series net: stmmac: re-configure tas basetime after ptp time adjust | expand

Checks

Context Check Description
netdev/cover_letter success Link
netdev/fixes_present success Link
netdev/patch_count success Link
netdev/tree_selection success Clearly marked for net-next
netdev/subject_prefix success Link
netdev/cc_maintainers warning 2 maintainers not CCed: alexandre.torgue@foss.st.com vee.khee.wong@linux.intel.com
netdev/source_inline success Was 0 now: 0
netdev/verify_signedoff success Link
netdev/module_param success Was 0 now: 0
netdev/build_32bit success Errors and warnings before: 23 this patch: 23
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/verify_fixes success Link
netdev/checkpatch warning WARNING: 'Caculate' may be misspelled - perhaps 'Calculate'? WARNING: line length of 83 exceeds 80 columns
netdev/build_allmodconfig_warn success Errors and warnings before: 23 this patch: 23
netdev/header_inline success Link

Commit Message

Xiaoliang Yang July 5, 2021, 10:26 a.m. UTC 
After adjusting the ptp time, the Qbv base time may be the past time
of the new current time. dwmac5 hardware limited the base time cannot
be set as past time. This patch add a btr_reserve to store the base
time get from qopt, then calculate the base time and reset the Qbv
configuration after ptp time adjust.

Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
---
 .../net/ethernet/stmicro/stmmac/stmmac_ptp.c  | 41 ++++++++++++++++++-
 .../net/ethernet/stmicro/stmmac/stmmac_tc.c   |  6 ++-
 include/linux/stmmac.h                        |  1 +
 3 files changed, 46 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c
index 4e86cdf2bc9f..580cc035536b 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c
@@ -62,7 +62,8 @@  static int stmmac_adjust_time(struct ptp_clock_info *ptp, s64 delta)
 	u32 sec, nsec;
 	u32 quotient, reminder;
 	int neg_adj = 0;
-	bool xmac;
+	bool xmac, est_rst = false;
+	int ret;
 
 	xmac = priv->plat->has_gmac4 || priv->plat->has_xgmac;
 
@@ -75,10 +76,48 @@  static int stmmac_adjust_time(struct ptp_clock_info *ptp, s64 delta)
 	sec = quotient;
 	nsec = reminder;
 
+	/* If EST is enabled, disabled it before adjust ptp time. */
+	if (priv->plat->est && priv->plat->est->enable) {
+		est_rst = true;
+		mutex_lock(&priv->plat->est->lock);
+		priv->plat->est->enable = false;
+		stmmac_est_configure(priv, priv->ioaddr, priv->plat->est,
+				     priv->plat->clk_ptp_rate);
+		mutex_unlock(&priv->plat->est->lock);
+	}
+
 	spin_lock_irqsave(&priv->ptp_lock, flags);
 	stmmac_adjust_systime(priv, priv->ptpaddr, sec, nsec, neg_adj, xmac);
 	spin_unlock_irqrestore(&priv->ptp_lock, flags);
 
+	/* Caculate new basetime and re-configured EST after PTP time adjust. */
+	if (est_rst) {
+		struct timespec64 current_time, time;
+		ktime_t current_time_ns, basetime;
+		u64 cycle_time;
+
+		mutex_lock(&priv->plat->est->lock);
+		priv->ptp_clock_ops.gettime64(&priv->ptp_clock_ops, &current_time);
+		current_time_ns = timespec64_to_ktime(current_time);
+		time.tv_nsec = priv->plat->est->btr_reserve[0];
+		time.tv_sec = priv->plat->est->btr_reserve[1];
+		basetime = timespec64_to_ktime(time);
+		cycle_time = priv->plat->est->ctr[1] * NSEC_PER_SEC +
+			     priv->plat->est->ctr[0];
+		time = stmmac_calc_tas_basetime(basetime,
+						current_time_ns,
+						cycle_time);
+
+		priv->plat->est->btr[0] = (u32)time.tv_nsec;
+		priv->plat->est->btr[1] = (u32)time.tv_sec;
+		priv->plat->est->enable = true;
+		ret = stmmac_est_configure(priv, priv->ioaddr, priv->plat->est,
+					   priv->plat->clk_ptp_rate);
+		mutex_unlock(&priv->plat->est->lock);
+		if (ret)
+			netdev_err(priv->dev, "failed to configure EST\n");
+	}
+
 	return 0;
 }
 
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
index b2a276aac724..c277595341ee 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
@@ -741,7 +741,7 @@  static int tc_setup_taprio(struct stmmac_priv *priv,
 {
 	u32 size, wid = priv->dma_cap.estwid, dep = priv->dma_cap.estdep;
 	struct plat_stmmacenet_data *plat = priv->plat;
-	struct timespec64 time, current_time;
+	struct timespec64 time, current_time, qopt_time;
 	ktime_t current_time_ns;
 	bool fpe = false;
 	int i, ret = 0;
@@ -850,6 +850,10 @@  static int tc_setup_taprio(struct stmmac_priv *priv,
 	priv->plat->est->btr[0] = (u32)time.tv_nsec;
 	priv->plat->est->btr[1] = (u32)time.tv_sec;
 
+	qopt_time = ktime_to_timespec64(qopt->base_time);
+	priv->plat->est->btr_reserve[0] = (u32)qopt_time.tv_nsec;
+	priv->plat->est->btr_reserve[1] = (u32)qopt_time.tv_sec;
+
 	ctr = qopt->cycle_time;
 	priv->plat->est->ctr[0] = do_div(ctr, NSEC_PER_SEC);
 	priv->plat->est->ctr[1] = (u32)ctr;
diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
index c38b65aaf8c2..f5ae3cf05918 100644
--- a/include/linux/stmmac.h
+++ b/include/linux/stmmac.h
@@ -117,6 +117,7 @@  struct stmmac_axi {
 struct stmmac_est {
 	struct mutex lock;
 	int enable;
+	u32 btr_reserve[2];
 	u32 btr_offset[2];
 	u32 btr[2];
 	u32 ctr[2];