diff mbox series

[V1,1/5] dt-bindings: fec: add the missing clocks properties

Message ID 20210709075355.27218-2-qiangqing.zhang@nxp.com (mailing list archive)
State Superseded
Delegated to: Netdev Maintainers
Headers show
Series net: fec: add support for i.MX8MQ and i.MX8QM | expand

Checks

Context Check Description
netdev/cover_letter success Link
netdev/fixes_present success Link
netdev/patch_count success Link
netdev/tree_selection success Guessed tree name to be net-next
netdev/subject_prefix success Link
netdev/cc_maintainers success CCed 6 of 6 maintainers
netdev/source_inline success Was 0 now: 0
netdev/verify_signedoff success Link
netdev/module_param success Was 0 now: 0
netdev/build_32bit success Errors and warnings before: 0 this patch: 0
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/verify_fixes success Link
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 17 lines checked
netdev/build_allmodconfig_warn success Errors and warnings before: 0 this patch: 0
netdev/header_inline success Link

Commit Message

Joakim Zhang July 9, 2021, 7:53 a.m. UTC 
From: Fugang Duan <fugang.duan@nxp.com>

Both driver and dts have already used these clocks properties, so add the
missing clocks info.

Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
---
 Documentation/devicetree/bindings/net/fsl-fec.txt | 11 +++++++++++
 1 file changed, 11 insertions(+)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/net/fsl-fec.txt b/Documentation/devicetree/bindings/net/fsl-fec.txt
index 9b543789cd52..6754be1b91c4 100644
--- a/Documentation/devicetree/bindings/net/fsl-fec.txt
+++ b/Documentation/devicetree/bindings/net/fsl-fec.txt
@@ -39,6 +39,17 @@  Optional properties:
   tx/rx queues 1 and 2. "int0" will be used for queue 0 and ENET_MII interrupts.
   For imx6sx, "int0" handles all 3 queues and ENET_MII. "pps" is for the pulse
   per second interrupt associated with 1588 precision time protocol(PTP).
+- clocks: Phandles to input clocks.
+- clock-name: Should be the names of the clocks
+  - "ipg", for MAC ipg_clk_s, ipg_clk_mac_s that are for register accessing.
+  - "ahb", for MAC ipg_clk, ipg_clk_mac that are bus clock.
+  - "ptp"(option), for IEEE1588 timer clock that requires the clock.
+  - "enet_clk_ref"(option), for MAC transmit/receiver reference clock like
+    RGMII TXC clock or RMII reference clock. It depends on board design,
+    the clock is required if RGMII TXC and RMII reference clock source from
+    SOC internal PLL.
+  - "enet_out"(option), output clock for external device, like supply clock
+    for PHY. The clock is required if PHY clock source from SOC.
 
 Optional subnodes:
 - mdio : specifies the mdio bus in the FEC, used as a container for phy nodes