Message ID | 20210815033248.98111-8-mailhol.vincent@wanadoo.fr (mailing list archive) |
---|---|
State | Awaiting Upstream |
Delegated to: | Netdev Maintainers |
Headers | show |
Series | add the netlink interface for CAN-FD Transmitter Delay Compensation (TDC) | expand |
Context | Check | Description |
---|---|---|
netdev/cover_letter | success | Link |
netdev/fixes_present | success | Link |
netdev/patch_count | success | Link |
netdev/tree_selection | success | Guessed tree name to be net-next |
netdev/subject_prefix | success | Link |
netdev/cc_maintainers | warning | 4 maintainers not CCed: davem@davemloft.net kuba@kernel.org arunachalam.santhanam@in.bosch.com wg@grandegger.com |
netdev/source_inline | success | Was 0 now: 0 |
netdev/verify_signedoff | success | Link |
netdev/module_param | success | Was 0 now: 0 |
netdev/build_32bit | success | Errors and warnings before: 0 this patch: 0 |
netdev/kdoc | success | Errors and warnings before: 0 this patch: 0 |
netdev/verify_fixes | success | Link |
netdev/checkpatch | success | total: 0 errors, 0 warnings, 0 checks, 30 lines checked |
netdev/build_allmodconfig_warn | success | Errors and warnings before: 0 this patch: 0 |
netdev/header_inline | success | Link |
On 15.08.2021 12:32:48, Vincent Mailhol wrote: > The documentation of struct es58x_fd_tx_conf_msg explains in details > the different TDC parameters. However, those description are redundant > with the documentation of struct can_tdc. > > Remove most of the description. > > Also, fixes a typo in the reference to the datasheet (E701 -> E70). As suggested, applied to linux-can-next/testing. regards, Marc
diff --git a/drivers/net/can/usb/etas_es58x/es58x_fd.h b/drivers/net/can/usb/etas_es58x/es58x_fd.h index ee18a87e40c0..a191891b8777 100644 --- a/drivers/net/can/usb/etas_es58x/es58x_fd.h +++ b/drivers/net/can/usb/etas_es58x/es58x_fd.h @@ -96,23 +96,14 @@ struct es58x_fd_bittiming { * @ctrlmode: type enum es58x_fd_ctrlmode. * @canfd_enabled: boolean (0: Classical CAN, 1: CAN and/or CANFD). * @data_bittiming: Bittiming for flexible data-rate transmission. - * @tdc_enabled: Transmitter Delay Compensation switch (0: disabled, - * 1: enabled). On very high bitrates, the delay between when the - * bit is sent and received on the CANTX and CANRX pins of the - * transceiver start to be significant enough for errors to occur - * and thus need to be compensated. - * @tdco: Transmitter Delay Compensation Offset. Offset value, in time - * quanta, defining the delay between the start of the bit - * reception on the CANRX pin of the transceiver and the SSP - * (Secondary Sample Point). Valid values: 0 to 127. - * @tdcf: Transmitter Delay Compensation Filter window. Defines the - * minimum value for the SSP position, in time quanta. The - * feature is enabled when TDCF is configured to a value greater - * than TDCO. Valid values: 0 to 127. + * @tdc_enabled: Transmitter Delay Compensation switch (0: TDC is + * disabled, 1: TDC is enabled). + * @tdco: Transmitter Delay Compensation Offset. + * @tdcf: Transmitter Delay Compensation Filter window. * - * Please refer to the microcontroller datasheet: "SAM - * E701/S70/V70/V71 Family" section 49 "Controller Area Network - * (MCAN)" for additional information. + * Please refer to the microcontroller datasheet: "SAM E70/S70/V70/V71 + * Family" section 49 "Controller Area Network (MCAN)" for additional + * information. */ struct es58x_fd_tx_conf_msg { struct es58x_fd_bittiming nominal_bittiming;
The documentation of struct es58x_fd_tx_conf_msg explains in details the different TDC parameters. However, those description are redundant with the documentation of struct can_tdc. Remove most of the description. Also, fixes a typo in the reference to the datasheet (E701 -> E70). Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> --- drivers/net/can/usb/etas_es58x/es58x_fd.h | 23 +++++++---------------- 1 file changed, 7 insertions(+), 16 deletions(-)