diff mbox series

[RFC,ethtool-next,v2,3/6] ethtool: Print CMIS Module State

Message ID 20210818155306.1278356-4-idosch@idosch.org (mailing list archive)
State Superseded
Delegated to: Michal Kubecek
Headers show
Series ethtool: Add ability to control transceiver modules' power mode | expand

Checks

Context Check Description
netdev/tree_selection success Not a local patch

Commit Message

Ido Schimmel Aug. 18, 2021, 3:53 p.m. UTC 
From: Ido Schimmel <idosch@nvidia.com>

Print the CMIS Module State when dumping EEPROM contents via the '-m'
option. It can be used, for example, to test module power mode settings.

Example output:

 # ethtool -m swp11
 Identifier                                : 0x18 (QSFP-DD Double Density 8X Pluggable Transceiver (INF-8628))
 ...
 Module State                              : 0x03 (ModuleReady)

 # ethtool --set-module swp11 power-mode-policy low

 # ethtool -m swp11
 Identifier                                : 0x18 (QSFP-DD Double Density 8X Pluggable Transceiver (INF-8628))
 ...
 Module State                              : 0x01 (ModuleLowPwr)

In case the module is in fault state, print the CMIS Module Fault Cause.

Signed-off-by: Ido Schimmel <idosch@nvidia.com>
---
 cmis.c | 71 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 cmis.h | 15 +++++++++++++
 2 files changed, 86 insertions(+)
diff mbox series

Patch

diff --git a/cmis.c b/cmis.c
index 361b721f332f..c5c1f02398f6 100644
--- a/cmis.c
+++ b/cmis.c
@@ -42,6 +42,73 @@  static void cmis_show_rev_compliance(const __u8 *id)
 	printf("\t%-41s : Rev. %d.%d\n", "Revision compliance", major, minor);
 }
 
+/**
+ * Print the current Module State. Relevant documents:
+ * [1] CMIS Rev. 5, pag. 57, section 6.3.2.2, Figure 6-3
+ * [2] CMIS Rev. 5, pag. 60, section 6.3.2.3, Figure 6-4
+ * [3] CMIS Rev. 5, pag. 107, section 8.2.2, Table 8-6
+ */
+static void cmis_show_mod_state(const __u8 *id)
+{
+	__u8 mod_state = (id[CMIS_MODULE_STATE_OFFSET] >> 1) & 0x07;
+
+	printf("\t%-41s : 0x%02x", "Module State", mod_state);
+	switch (mod_state) {
+	case CMIS_MODULE_STATE_MODULE_LOW_PWR:
+		printf(" (ModuleLowPwr)\n");
+		break;
+	case CMIS_MODULE_STATE_MODULE_PWR_UP:
+		printf(" (ModulePwrUp)\n");
+		break;
+	case CMIS_MODULE_STATE_MODULE_READY:
+		printf(" (ModuleReady)\n");
+		break;
+	case CMIS_MODULE_STATE_MODULE_PWR_DN:
+		printf(" (ModulePwrDn)\n");
+		break;
+	case CMIS_MODULE_STATE_MODULE_FAULT:
+		printf(" (ModuleFault)\n");
+		break;
+	default:
+		printf(" (reserved or unknown)\n");
+		break;
+	}
+}
+
+/**
+ * Print the Module Fault Information. Relevant documents:
+ * [1] CMIS Rev. 5, pag. 64, section 6.3.2.12
+ * [2] CMIS Rev. 5, pag. 115, section 8.2.10, Table 8-15
+ */
+static void cmis_show_mod_fault_cause(const __u8 *id)
+{
+	__u8 mod_state = (id[CMIS_MODULE_STATE_OFFSET] >> 1) & 0x07;
+	__u8 fault_cause = id[CMIS_MODULE_FAULT_OFFSET];
+
+	if (mod_state != CMIS_MODULE_STATE_MODULE_FAULT)
+		return;
+
+	printf("\t%-41s : 0x%02x", "Module Fault Cause", fault_cause);
+	switch (fault_cause) {
+	case CMIS_MODULE_FAULT_NO_FAULT:
+		printf(" (No fault detected / not supported)\n");
+		break;
+	case CMIS_MODULE_FAULT_TEC_RUNAWAY:
+		printf(" (TEC runaway)\n");
+		break;
+	case CMIS_MODULE_FAULT_DATA_MEM_CORRUPTED:
+		printf(" (Data memory corrupted)\n");
+		break;
+	case CMIS_MODULE_FAULT_PROG_MEM_CORRUPTED:
+		printf(" (Program memory corrupted)\n");
+		break;
+	default:
+		printf(" (reserved or unknown)\n");
+		break;
+	}
+}
+
+
 /**
  * Print information about the device's power consumption.
  * Relevant documents:
@@ -336,6 +403,8 @@  void qsfp_dd_show_all(const __u8 *id)
 	cmis_show_link_len(id);
 	cmis_show_vendor_info(id);
 	cmis_show_rev_compliance(id);
+	cmis_show_mod_state(id);
+	cmis_show_mod_fault_cause(id);
 }
 
 void cmis_show_all(const struct ethtool_module_eeprom *page_zero,
@@ -356,4 +425,6 @@  void cmis_show_all(const struct ethtool_module_eeprom *page_zero,
 
 	cmis_show_vendor_info(page_zero_data);
 	cmis_show_rev_compliance(page_zero_data);
+	cmis_show_mod_state(page_zero_data);
+	cmis_show_mod_fault_cause(page_zero_data);
 }
diff --git a/cmis.h b/cmis.h
index 78ee1495bc33..41383132cf8e 100644
--- a/cmis.h
+++ b/cmis.h
@@ -5,6 +5,21 @@ 
 #define CMIS_ID_OFFSET				0x00
 #define CMIS_REV_COMPLIANCE_OFFSET		0x01
 
+/* Module State (Page 0) */
+#define CMIS_MODULE_STATE_OFFSET		0x03
+#define CMIS_MODULE_STATE_MODULE_LOW_PWR	0x01
+#define CMIS_MODULE_STATE_MODULE_PWR_UP		0x02
+#define CMIS_MODULE_STATE_MODULE_READY		0x03
+#define CMIS_MODULE_STATE_MODULE_PWR_DN		0x04
+#define CMIS_MODULE_STATE_MODULE_FAULT		0x05
+
+/* Module Fault Information (Page 0) */
+#define CMIS_MODULE_FAULT_OFFSET		0x29
+#define CMIS_MODULE_FAULT_NO_FAULT		0
+#define CMIS_MODULE_FAULT_TEC_RUNAWAY		1
+#define CMIS_MODULE_FAULT_DATA_MEM_CORRUPTED	2
+#define CMIS_MODULE_FAULT_PROG_MEM_CORRUPTED	3
+
 #define CMIS_MODULE_TYPE_OFFSET			0x55
 #define CMIS_MT_MMF				0x01
 #define CMIS_MT_SMF				0x02