diff mbox series

[RFC,net-next,v3,6/6] mlxsw: Add support for transceiver module extended states

Message ID 20210824130344.1828076-7-idosch@idosch.org (mailing list archive)
State Superseded
Delegated to: Netdev Maintainers
Headers show
Series ethtool: Add ability to control transceiver modules' power mode | expand

Checks

Context Check Description
netdev/apply fail Patch does not apply to net-next
netdev/tree_selection success Clearly marked for net-next

Commit Message

Ido Schimmel Aug. 24, 2021, 1:03 p.m. UTC 
From: Ido Schimmel <idosch@nvidia.com>

Add support for the two transceiver module extended sub-states added in
previous patch. The two extended sub-states are meant to describe link
issues related to transceiver modules.

Signed-off-by: Ido Schimmel <idosch@nvidia.com>
---
 .../mellanox/mlxsw/spectrum_ethtool.c         | 45 ++++++++++++++++++-
 1 file changed, 43 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_ethtool.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_ethtool.c
index 7329bc84a8ee..337fa0053de9 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_ethtool.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_ethtool.c
@@ -96,6 +96,11 @@  mlxsw_sp_link_ext_state_opcode_map[] = {
 	{1032, ETHTOOL_LINK_EXT_STATE_POWER_BUDGET_EXCEEDED, 0},
 
 	{1030, ETHTOOL_LINK_EXT_STATE_OVERHEAT, 0},
+
+	{1042, ETHTOOL_LINK_EXT_STATE_MODULE,
+	 ETHTOOL_LINK_EXT_SUBSTATE_MODULE_CMIS_NOT_READY},
+	{2048, ETHTOOL_LINK_EXT_STATE_MODULE,
+	 ETHTOOL_LINK_EXT_SUBSTATE_MODULE_LOW_POWER_MODE},
 };
 
 static void
@@ -124,6 +129,10 @@  mlxsw_sp_port_set_link_ext_state(struct mlxsw_sp_ethtool_link_ext_state_opcode_m
 		link_ext_state_info->cable_issue =
 			link_ext_state_mapping.link_ext_substate;
 		break;
+	case ETHTOOL_LINK_EXT_STATE_MODULE:
+		link_ext_state_info->module =
+			link_ext_state_mapping.link_ext_substate;
+		break;
 	default:
 		break;
 	}
@@ -131,19 +140,46 @@  mlxsw_sp_port_set_link_ext_state(struct mlxsw_sp_ethtool_link_ext_state_opcode_m
 	link_ext_state_info->link_ext_state = link_ext_state_mapping.link_ext_state;
 }
 
+static int
+mlxsw_sp_port_status_opcode_drv_get(struct mlxsw_sp_port *mlxsw_sp_port,
+				    u32 *p_status_opcode)
+{
+	struct ethtool_module_power_mode_params params = {};
+	struct mlxsw_sp *mlxsw_sp = mlxsw_sp_port->mlxsw_sp;
+	u8 module = mlxsw_sp_port->mapping.module;
+	int err;
+
+	*p_status_opcode = 0;
+
+	err = mlxsw_env_get_module_power_mode(mlxsw_sp->core, module, &params,
+					      NULL);
+	if (err)
+		return err;
+	if (params.mode_valid && params.mode == ETHTOOL_MODULE_POWER_MODE_LOW)
+		*p_status_opcode = 2048;
+
+	return 0;
+}
+
 static int
 mlxsw_sp_port_get_link_ext_state(struct net_device *dev,
 				 struct ethtool_link_ext_state_info *link_ext_state_info)
 {
 	struct mlxsw_sp_ethtool_link_ext_state_opcode_mapping link_ext_state_mapping;
 	struct mlxsw_sp_port *mlxsw_sp_port = netdev_priv(dev);
+	u32 status_opcode, status_opcode_drv;
 	char pddr_pl[MLXSW_REG_PDDR_LEN];
 	int opcode, err, i;
-	u32 status_opcode;
 
 	if (netif_carrier_ok(dev))
 		return -ENODATA;
 
+	/* Opcodes 2048-3072 are reserved for driver use. */
+	err = mlxsw_sp_port_status_opcode_drv_get(mlxsw_sp_port,
+						  &status_opcode_drv);
+	if (err)
+		return err;
+
 	mlxsw_reg_pddr_pack(pddr_pl, mlxsw_sp_port->local_port,
 			    MLXSW_REG_PDDR_PAGE_SELECT_TROUBLESHOOTING_INFO);
 
@@ -156,9 +192,14 @@  mlxsw_sp_port_get_link_ext_state(struct net_device *dev,
 		return err;
 
 	status_opcode = mlxsw_reg_pddr_trblsh_status_opcode_get(pddr_pl);
-	if (!status_opcode)
+	if (!status_opcode && !status_opcode_drv)
 		return -ENODATA;
 
+	/* Allow driver-detected issues to take precedence, as it is likely
+	 * that they are more meaningful to user space.
+	 */
+	status_opcode = status_opcode_drv ? status_opcode_drv : status_opcode;
+
 	for (i = 0; i < ARRAY_SIZE(mlxsw_sp_link_ext_state_opcode_map); i++) {
 		link_ext_state_mapping = mlxsw_sp_link_ext_state_opcode_map[i];
 		if (link_ext_state_mapping.status_opcode == status_opcode) {