diff mbox series

[net-next,5/8] mlxsw: spectrum: Use PLLP to get front panel number and split number

Message ID 20210914061330.226000-6-idosch@idosch.org (mailing list archive)
State Accepted
Commit 1dbfc9d76551f4683a887900c2185c29690acab3
Delegated to: Netdev Maintainers
Headers show
Series mlxsw: spectrum: Adjustments to port split and label port | expand

Checks

Context Check Description
netdev/cover_letter success Link
netdev/fixes_present success Link
netdev/patch_count success Link
netdev/tree_selection success Clearly marked for net-next
netdev/subject_prefix success Link
netdev/cc_maintainers success CCed 5 of 5 maintainers
netdev/source_inline success Was 0 now: 0
netdev/verify_signedoff success Link
netdev/module_param success Was 0 now: 0
netdev/build_32bit success Errors and warnings before: 0 this patch: 0
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/verify_fixes success Link
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 62 lines checked
netdev/build_allmodconfig_warn success Errors and warnings before: 0 this patch: 0
netdev/header_inline success Link

Commit Message

Ido Schimmel Sept. 14, 2021, 6:13 a.m. UTC 
From: Jiri Pirko <jiri@nvidia.com>

Instead of relying on the values coming from the PMLP register, use PLLP
to get the information about port front panel number and split number.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
---
 .../net/ethernet/mellanox/mlxsw/spectrum.c    | 35 ++++++++++++++++---
 1 file changed, 31 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
index e12232f371c8..c0e52afe1afd 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
@@ -1441,6 +1441,23 @@  mlxsw_sp_port_vlan_classification_set(struct mlxsw_sp_port *mlxsw_sp_port,
 	return mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(spvc), spvc_pl);
 }
 
+static int mlxsw_sp_port_label_info_get(struct mlxsw_sp *mlxsw_sp,
+					u8 local_port, u8 *port_number,
+					u8 *split_port_subnumber,
+					u8 *slot_index)
+{
+	char pllp_pl[MLXSW_REG_PLLP_LEN];
+	int err;
+
+	mlxsw_reg_pllp_pack(pllp_pl, local_port);
+	err = mlxsw_reg_query(mlxsw_sp->core, MLXSW_REG(pllp), pllp_pl);
+	if (err)
+		return err;
+	mlxsw_reg_pllp_unpack(pllp_pl, port_number,
+			      split_port_subnumber, slot_index);
+	return 0;
+}
+
 static int mlxsw_sp_port_create(struct mlxsw_sp *mlxsw_sp, u8 local_port,
 				u8 split_base_local_port,
 				struct mlxsw_sp_port_mapping *port_mapping)
@@ -1449,7 +1466,10 @@  static int mlxsw_sp_port_create(struct mlxsw_sp *mlxsw_sp, u8 local_port,
 	bool split = !!split_base_local_port;
 	struct mlxsw_sp_port *mlxsw_sp_port;
 	u32 lanes = port_mapping->width;
+	u8 split_port_subnumber;
 	struct net_device *dev;
+	u8 port_number;
+	u8 slot_index;
 	bool splittable;
 	int err;
 
@@ -1467,12 +1487,18 @@  static int mlxsw_sp_port_create(struct mlxsw_sp *mlxsw_sp, u8 local_port,
 		goto err_port_swid_set;
 	}
 
+	err = mlxsw_sp_port_label_info_get(mlxsw_sp, local_port, &port_number,
+					   &split_port_subnumber, &slot_index);
+	if (err) {
+		dev_err(mlxsw_sp->bus_info->dev, "Port %d: Failed to get port label information\n",
+			local_port);
+		goto err_port_label_info_get;
+	}
+
 	splittable = lanes > 1 && !split;
 	err = mlxsw_core_port_init(mlxsw_sp->core, local_port,
-				   port_mapping->module + 1, split,
-				   port_mapping->lane / lanes,
-				   splittable, lanes,
-				   mlxsw_sp->base_mac,
+				   port_number, split, split_port_subnumber,
+				   splittable, lanes, mlxsw_sp->base_mac,
 				   sizeof(mlxsw_sp->base_mac));
 	if (err) {
 		dev_err(mlxsw_sp->bus_info->dev, "Port %d: Failed to init core port\n",
@@ -1717,6 +1743,7 @@  static int mlxsw_sp_port_create(struct mlxsw_sp *mlxsw_sp, u8 local_port,
 err_alloc_etherdev:
 	mlxsw_core_port_fini(mlxsw_sp->core, local_port);
 err_core_port_init:
+err_port_label_info_get:
 	mlxsw_sp_port_swid_set(mlxsw_sp, local_port,
 			       MLXSW_PORT_SWID_DISABLED_PORT);
 err_port_swid_set: