@@ -191,7 +191,7 @@ struct ptp_ocp_i2c_info {
struct ptp_ocp_ext_info {
int index;
irqreturn_t (*irq_fcn)(int irq, void *priv);
- int (*enable)(void *priv, bool enable);
+ int (*enable)(void *priv, u32 req, bool enable);
};
struct ptp_ocp_ext_src {
@@ -237,10 +237,14 @@ struct ptp_ocp {
int nmea_port;
u8 serial[6];
bool has_serial;
+ u32 pps_req_map;
int flash_start;
u32 utc_tai_offset;
};
+#define OCP_REQ_TIMESTAMP BIT(0)
+#define OCP_REQ_PPS BIT(1)
+
struct ocp_resource {
unsigned long offset;
int size;
@@ -258,7 +262,7 @@ static int ptp_ocp_register_serial(struct ptp_ocp *bp, struct ocp_resource *r);
static int ptp_ocp_register_ext(struct ptp_ocp *bp, struct ocp_resource *r);
static int ptp_ocp_fb_board_init(struct ptp_ocp *bp, struct ocp_resource *r);
static irqreturn_t ptp_ocp_ts_irq(int irq, void *priv);
-static int ptp_ocp_ts_enable(void *priv, bool enable);
+static int ptp_ocp_ts_enable(void *priv, u32 req, bool enable);
#define bp_assign_entry(bp, res, val) ({ \
uintptr_t addr = (uintptr_t)(bp) + (res)->bp_offset; \
@@ -284,7 +288,7 @@ static int ptp_ocp_ts_enable(void *priv, bool enable);
OCP_RES_LOCATION(member), .setup = ptp_ocp_register_ext
/* This is the MSI vector mapping used.
- * 0: N/C
+ * 0: TS3 (and PPS)
* 1: TS0
* 2: TS1
* 3: GNSS
@@ -329,6 +333,15 @@ static struct ocp_resource ocp_fb_resource[] = {
.enable = ptp_ocp_ts_enable,
},
},
+ {
+ OCP_EXT_RESOURCE(pps),
+ .offset = 0x010C0000, .size = 0x10000, .irq_vec = 0,
+ .extra = &(struct ptp_ocp_ext_info) {
+ .index = 3,
+ .irq_fcn = ptp_ocp_ts_irq,
+ .enable = ptp_ocp_ts_enable,
+ },
+ },
{
OCP_MEM_RESOURCE(pps_to_ext),
.offset = 0x01030000, .size = 0x10000,
@@ -634,10 +647,12 @@ ptp_ocp_enable(struct ptp_clock_info *ptp_info, struct ptp_clock_request *rq,
{
struct ptp_ocp *bp = container_of(ptp_info, struct ptp_ocp, ptp_info);
struct ptp_ocp_ext_src *ext = NULL;
+ u32 req;
int err;
switch (rq->type) {
case PTP_CLK_REQ_EXTTS:
+ req = OCP_REQ_TIMESTAMP;
switch (rq->extts.index) {
case 0:
ext = bp->ts0;
@@ -648,18 +663,30 @@ ptp_ocp_enable(struct ptp_clock_info *ptp_info, struct ptp_clock_request *rq,
case 2:
ext = bp->ts2;
break;
+ case 3:
+ ext = bp->pps;
+ break;
}
break;
case PTP_CLK_REQ_PPS:
+ req = OCP_REQ_PPS;
ext = bp->pps;
break;
+ case PTP_CLK_REQ_PEROUT:
+ if (on &&
+ (rq->perout.period.sec != 1 || rq->perout.period.nsec != 0))
+ return -EINVAL;
+ /* This is a request for 1PPS on an output SMA.
+ * Allow, but assume manual configuration.
+ */
+ return 0;
default:
return -EOPNOTSUPP;
}
err = -ENXIO;
if (ext)
- err = ext->info->enable(ext, on);
+ err = ext->info->enable(ext, req, on);
return err;
}
@@ -675,7 +702,8 @@ static const struct ptp_clock_info ptp_ocp_clock_info = {
.adjphase = ptp_ocp_adjphase,
.enable = ptp_ocp_enable,
.pps = true,
- .n_ext_ts = 3,
+ .n_ext_ts = 4,
+ .n_per_out = 1,
};
static void
@@ -1163,6 +1191,16 @@ ptp_ocp_ts_irq(int irq, void *priv)
struct ptp_clock_event ev;
u32 sec, nsec;
+ if (ext == ext->bp->pps) {
+ if (ext->bp->pps_req_map & OCP_REQ_PPS) {
+ ev.type = PTP_CLOCK_PPS;
+ ptp_clock_event(ext->bp->ptp, &ev);
+ }
+
+ if ((ext->bp->pps_req_map & ~OCP_REQ_PPS) == 0)
+ goto out;
+ }
+
/* XXX should fix API - this converts s/ns -> ts -> s/ns */
sec = ioread32(®->time_sec);
nsec = ioread32(®->time_ns);
@@ -1173,16 +1211,31 @@ ptp_ocp_ts_irq(int irq, void *priv)
ptp_clock_event(ext->bp->ptp, &ev);
+out:
iowrite32(1, ®->intr); /* write 1 to ack */
return IRQ_HANDLED;
}
static int
-ptp_ocp_ts_enable(void *priv, bool enable)
+ptp_ocp_ts_enable(void *priv, u32 req, bool enable)
{
struct ptp_ocp_ext_src *ext = priv;
struct ts_reg __iomem *reg = ext->mem;
+ struct ptp_ocp *bp = ext->bp;
+
+ if (ext == bp->pps) {
+ u32 old_map = bp->pps_req_map;
+
+ if (enable)
+ bp->pps_req_map |= req;
+ else
+ bp->pps_req_map &= ~req;
+
+ /* if no state change, just return */
+ if ((!!old_map ^ !!bp->pps_req_map) == 0)
+ return 0;
+ }
if (enable) {
iowrite32(1, ®->enable);
@@ -1199,7 +1252,7 @@ ptp_ocp_ts_enable(void *priv, bool enable)
static void
ptp_ocp_unregister_ext(struct ptp_ocp_ext_src *ext)
{
- ext->info->enable(ext, false);
+ ext->info->enable(ext, ~0, false);
pci_free_irq(ext->bp->pdev, ext->irq_vec, ext);
kfree(ext);
}
@@ -1889,8 +1942,8 @@ ptp_ocp_summary_show(struct seq_file *s, void *data)
struct timespec64 ts;
struct ptp_ocp *bp;
const char *src;
+ bool on, map;
char *buf;
- bool on;
buf = (char *)__get_free_page(GFP_KERNEL);
if (!buf)
@@ -1938,6 +1991,19 @@ ptp_ocp_summary_show(struct seq_file *s, void *data)
on ? " ON" : "OFF", src);
}
+ if (bp->pps) {
+ ts_reg = bp->pps->mem;
+ src = "PHC";
+ on = ioread32(&ts_reg->enable);
+ map = !!(bp->pps_req_map & OCP_REQ_TIMESTAMP);
+ seq_printf(s, "%7s: %s, src: %s\n", "TS3",
+ on & map ? " ON" : "OFF", src);
+
+ map = !!(bp->pps_req_map & OCP_REQ_PPS);
+ seq_printf(s, "%7s: %s, src: %s\n", "PPS",
+ on & map ? " ON" : "OFF", src);
+ }
+
if (bp->irig_out) {
ctrl = ioread32(&bp->irig_out->ctrl);
on = ctrl & IRIG_M_CTRL_ENABLE;
A 4th timestamper is added which timestamps the output of the PHC. The clock nanosecond offset is not always zero, so when compared to other timestampers, this provides precise measurements. Also, the timestamper interrupt from the PHC can be used to generate a PPS signal for /dev/pps. Also allow PTP_CLK_REQ_PEROUT requests for a 1PPS output, but do not actually configure any output pins, this is done via sysfs. Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> --- drivers/ptp/ptp_ocp.c | 82 ++++++++++++++++++++++++++++++++++++++----- 1 file changed, 74 insertions(+), 8 deletions(-)