Message ID | 20210918095637.20108-7-mailhol.vincent@wanadoo.fr (mailing list archive) |
---|---|
State | Awaiting Upstream |
Delegated to: | Netdev Maintainers |
Headers | show |
Series | add the netlink interface for CAN-FD Transmitter Delay Compensation (TDC) | expand |
Context | Check | Description |
---|---|---|
netdev/cover_letter | success | Link |
netdev/fixes_present | success | Link |
netdev/patch_count | success | Link |
netdev/tree_selection | success | Guessed tree name to be net-next |
netdev/subject_prefix | success | Link |
netdev/cc_maintainers | warning | 1 maintainers not CCed: wg@grandegger.com |
netdev/source_inline | success | Was 0 now: 0 |
netdev/verify_signedoff | success | Link |
netdev/module_param | success | Was 0 now: 0 |
netdev/build_32bit | success | Errors and warnings before: 0 this patch: 0 |
netdev/kdoc | success | Errors and warnings before: 0 this patch: 0 |
netdev/verify_fixes | success | Link |
netdev/checkpatch | success | total: 0 errors, 0 warnings, 0 checks, 35 lines checked |
netdev/build_allmodconfig_warn | success | Errors and warnings before: 0 this patch: 0 |
netdev/header_inline | success | Link |
diff --git a/include/linux/can/dev.h b/include/linux/can/dev.h index b4aa0f048cab..45f19d9db5ca 100644 --- a/include/linux/can/dev.h +++ b/include/linux/can/dev.h @@ -102,6 +102,35 @@ static inline bool can_tdc_is_enabled(const struct can_priv *priv) return !!(priv->ctrlmode & CAN_CTRLMODE_TDC_MASK); } +/* + * can_get_relative_tdco() - TDCO relative to the sample point + * + * struct can_tdc::tdco represents the absolute offset from TDCV. Some + * controllers use instead an offset relative to the Sample Point (SP) + * such that: + * + * SSP = TDCV + absolute TDCO + * = TDCV + SP + relative TDCO + * + * -+----------- one bit ----------+-- TX pin + * |<--- Sample Point --->| + * + * --+----------- one bit ----------+-- RX pin + * |<-------- TDCV -------->| + * |<------------------------>| absolute TDCO + * |<--- Sample Point --->| + * | |<->| relative TDCO + * |<------------- Secondary Sample Point ------------>| + */ +static inline s32 can_get_relative_tdco(const struct can_priv *priv) +{ + const struct can_bittiming *dbt = &priv->data_bittiming; + s32 sample_point_in_tc = (CAN_SYNC_SEG + dbt->prop_seg + + dbt->phase_seg1) * dbt->brp; + + return (s32)priv->tdc.tdco - sample_point_in_tc; +} + /* helper to define static CAN controller features at device creation time */ static inline void can_set_static_ctrlmode(struct net_device *dev, u32 static_mode)
struct can_tdc::tdco represents the absolute offset from TDCV. Some controllers use instead an offset relative to the Sample Point (SP) such that: | SSP = TDCV + absolute TDCO | = TDCV + SP + relative TDCO Consequently: | relative TDCO = absolute TDCO - SP The function can_tdc_get_relative_tdco() allow to retrieve this relative TDCO value. CC: Stefan Mätje <Stefan.Maetje@esd.eu> Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> --- Hi Marc, As Stefan pointed out in: https://lore.kernel.org/linux-can/79691916e4280970f583a54cd5010ece025a1c53.c amel@esd.eu/ it seems that no so many CAN devices are using the relative TDCO (maybe the ESDACC is the only one?). Depending on the output of your discussion with Microchip and if the mcp25xxfd is indeed using an absolute tdco, it might make sense to drop this patch from the series. Yours sincerely, Vincent --- include/linux/can/dev.h | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+)