diff mbox series

[net-next,v2,3/3] net: phy: at803x: fix spacing and improve name for 83xx phy

Message ID 20210919162817.26924-4-ansuelsmth@gmail.com (mailing list archive)
State Accepted
Commit d44fd8604a4ab92119adb35f05fd87612af722b5
Delegated to: Netdev Maintainers
Headers show
Series Improve support for qca8327 internal | expand

Checks

Context Check Description
netdev/cover_letter success Link
netdev/fixes_present success Link
netdev/patch_count success Link
netdev/tree_selection success Clearly marked for net-next
netdev/subject_prefix success Link
netdev/cc_maintainers success CCed 6 of 6 maintainers
netdev/source_inline success Was 0 now: 0
netdev/verify_signedoff success Link
netdev/module_param success Was 0 now: 0
netdev/build_32bit success Errors and warnings before: 0 this patch: 0
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/verify_fixes success Link
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 77 lines checked
netdev/build_allmodconfig_warn success Errors and warnings before: 0 this patch: 0
netdev/header_inline success Link

Commit Message

Christian Marangi Sept. 19, 2021, 4:28 p.m. UTC 
Fix spacing and improve name for 83xx phy following other phy in the
same driver.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
 drivers/net/phy/at803x.c | 60 ++++++++++++++++++++--------------------
 1 file changed, 30 insertions(+), 30 deletions(-)

Comments

Andrew Lunn Sept. 19, 2021, 5:08 p.m. UTC | #1 
On Sun, Sep 19, 2021 at 06:28:17PM +0200, Ansuel Smith wrote:
> Fix spacing and improve name for 83xx phy following other phy in the
> same driver.
> 
> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew
diff mbox series

Patch

diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index db432d228d07..3feee4d59030 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -1410,47 +1410,47 @@  static struct phy_driver at803x_driver[] = {
 	.config_aneg		= at803x_config_aneg,
 }, {
 	/* QCA8337 */
-	.phy_id = QCA8337_PHY_ID,
-	.phy_id_mask = QCA8K_PHY_ID_MASK,
-	.name = "QCA PHY 8337",
+	.phy_id			= QCA8337_PHY_ID,
+	.phy_id_mask		= QCA8K_PHY_ID_MASK,
+	.name			= "Qualcomm Atheros 8337 internal PHY",
 	/* PHY_GBIT_FEATURES */
-	.probe = at803x_probe,
-	.flags = PHY_IS_INTERNAL,
-	.config_init = qca83xx_config_init,
-	.soft_reset = genphy_soft_reset,
-	.get_sset_count = at803x_get_sset_count,
-	.get_strings = at803x_get_strings,
-	.get_stats = at803x_get_stats,
+	.probe			= at803x_probe,
+	.flags			= PHY_IS_INTERNAL,
+	.config_init		= qca83xx_config_init,
+	.soft_reset		= genphy_soft_reset,
+	.get_sset_count		= at803x_get_sset_count,
+	.get_strings		= at803x_get_strings,
+	.get_stats		= at803x_get_stats,
 	.suspend		= genphy_suspend,
 	.resume			= genphy_resume,
 }, {
 	/* QCA8327-A from switch QCA8327-AL1A */
-	.phy_id = QCA8327_A_PHY_ID,
-	.phy_id_mask = QCA8K_PHY_ID_MASK,
-	.name = "QCA PHY 8327-A",
+	.phy_id			= QCA8327_A_PHY_ID,
+	.phy_id_mask		= QCA8K_PHY_ID_MASK,
+	.name			= "Qualcomm Atheros 8327-A internal PHY",
 	/* PHY_GBIT_FEATURES */
-	.probe = at803x_probe,
-	.flags = PHY_IS_INTERNAL,
-	.config_init = qca83xx_config_init,
-	.soft_reset = genphy_soft_reset,
-	.get_sset_count = at803x_get_sset_count,
-	.get_strings = at803x_get_strings,
-	.get_stats = at803x_get_stats,
+	.probe			= at803x_probe,
+	.flags			= PHY_IS_INTERNAL,
+	.config_init		= qca83xx_config_init,
+	.soft_reset		= genphy_soft_reset,
+	.get_sset_count		= at803x_get_sset_count,
+	.get_strings		= at803x_get_strings,
+	.get_stats		= at803x_get_stats,
 	.suspend		= genphy_suspend,
 	.resume			= genphy_resume,
 }, {
 	/* QCA8327-B from switch QCA8327-BL1A */
-	.phy_id = QCA8327_B_PHY_ID,
-	.phy_id_mask = QCA8K_PHY_ID_MASK,
-	.name = "QCA PHY 8327-B",
+	.phy_id			= QCA8327_B_PHY_ID,
+	.phy_id_mask		= QCA8K_PHY_ID_MASK,
+	.name			= "Qualcomm Atheros 8327-B internal PHY",
 	/* PHY_GBIT_FEATURES */
-	.probe = at803x_probe,
-	.flags = PHY_IS_INTERNAL,
-	.config_init = qca83xx_config_init,
-	.soft_reset = genphy_soft_reset,
-	.get_sset_count = at803x_get_sset_count,
-	.get_strings = at803x_get_strings,
-	.get_stats = at803x_get_stats,
+	.probe			= at803x_probe,
+	.flags			= PHY_IS_INTERNAL,
+	.config_init		= qca83xx_config_init,
+	.soft_reset		= genphy_soft_reset,
+	.get_sset_count		= at803x_get_sset_count,
+	.get_strings		= at803x_get_strings,
+	.get_stats		= at803x_get_stats,
 	.suspend		= genphy_suspend,
 	.resume			= genphy_resume,
 }, };