@@ -700,7 +700,7 @@ static int phy_check_link_status(struct phy_device *phydev)
}
/**
- * phy_start_aneg - start auto-negotiation for this PHY device
+ * _phy_start_aneg - start auto-negotiation for this PHY device
* @phydev: the phy_device struct
*
* Description: Sanitizes the settings (if we're not autonegotiating
@@ -708,25 +708,43 @@ static int phy_check_link_status(struct phy_device *phydev)
* If the PHYCONTROL Layer is operating, we change the state to
* reflect the beginning of Auto-negotiation or forcing.
*/
-int phy_start_aneg(struct phy_device *phydev)
+static int _phy_start_aneg(struct phy_device *phydev)
{
int err;
+ lockdep_assert_held(&phydev->lock);
+
if (!phydev->drv)
return -EIO;
- mutex_lock(&phydev->lock);
-
if (AUTONEG_DISABLE == phydev->autoneg)
phy_sanitize_settings(phydev);
err = phy_config_aneg(phydev);
if (err < 0)
- goto out_unlock;
+ return err;
if (phy_is_started(phydev))
err = phy_check_link_status(phydev);
-out_unlock:
+
+ return err;
+}
+
+/**
+ * phy_start_aneg - start auto-negotiation for this PHY device
+ * @phydev: the phy_device struct
+ *
+ * Description: Sanitizes the settings (if we're not autonegotiating
+ * them), and then calls the driver's config_aneg function.
+ * If the PHYCONTROL Layer is operating, we change the state to
+ * reflect the beginning of Auto-negotiation or forcing.
+ */
+int phy_start_aneg(struct phy_device *phydev)
+{
+ int err;
+
+ mutex_lock(&phydev->lock);
+ err = _phy_start_aneg(phydev);
mutex_unlock(&phydev->lock);
return err;
Split phy_start_aneg into a wrapper which takes the PHY lock, and a helper doing the real work. This will be needed when phy_ethtook_ksettings_set takes the lock. Fixes: 2d55173e71b0 ("phy: add generic function to support ksetting support") Signed-off-by: Andrew Lunn <andrew@lunn.ch> --- drivers/net/phy/phy.c | 30 ++++++++++++++++++++++++------ 1 file changed, 24 insertions(+), 6 deletions(-)