diff mbox series

[net-next,v2,8/8] net: phy: marvell10g: select host interface configuration

Message ID 20211123164027.15618-9-kabel@kernel.org (mailing list archive)
State Changes Requested
Delegated to: Netdev Maintainers
Headers show
Series Extend `phy-mode` to string array | expand

Checks

Context Check Description
netdev/tree_selection success Clearly marked for net-next
netdev/fixes_present success Fixes tag not required for -next series
netdev/subject_prefix success Link
netdev/cover_letter success Series has a cover letter
netdev/patch_count success Link
netdev/header_inline success No static functions without inline keyword in header files
netdev/build_32bit success Errors and warnings before: 0 this patch: 0
netdev/cc_maintainers warning 2 maintainers not CCed: linux@armlinux.org.uk hkallweit1@gmail.com
netdev/build_clang success Errors and warnings before: 0 this patch: 0
netdev/module_param success Was 0 now: 0
netdev/verify_signedoff success Signed-off-by tag matches author and committer
netdev/verify_fixes success No Fixes tag
netdev/build_allmodconfig_warn success Errors and warnings before: 0 this patch: 0
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 182 lines checked
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/source_inline success Was 0 now: 0

Commit Message

Marek Behún Nov. 23, 2021, 4:40 p.m. UTC 
From: Russell King <rmk+kernel@armlinux.org.uk>

Select the host interface configuration according to the capabilities of
the host.

The PHY supports several configurations of host communication:
- always communicate with host in 10gbase-r, even if copper speed is
  lower (rate matching mode),
- the same as above but use xaui/rxaui instead of 10gbase-r,
- switch host SerDes mode between 10gbase-r, 5gbase-r, 2500base-x and
  sgmii according to copper speed,
- the same as above but use xaui/rxaui instead of 10gbase-r.

This mode of host communication, called MACTYPE, is by default selected
by strapping pins, but it can be changed in software.

This adds support for selecting this mode according to which modes are
supported by the host.

This allows the kernel to:
- support SFP modules with 88X33X0 or 88E21X0 inside them
- switch interface modes when the PHY is used with the mvpp2 MAC
  (e.g. on MacchiatoBIN)

Note: we use mv3310_select_mactype() for both 88X3310 and 88X3340,
although 88X3340 does not support XAUI. This is not a problem because
88X3340 does not declare XAUI in it's supported_interfaces, and so this
function will never choose that MACTYPE.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
[ rebase, updated, also added support for 88E21X0 ]
Signed-off-by: Marek Behún <kabel@kernel.org>
---
Changes since v1:
- added more explanation to commit message, as per Vladimir Oltean's
  suggestion
---
 drivers/net/phy/marvell10g.c | 120 +++++++++++++++++++++++++++++++++--
 1 file changed, 115 insertions(+), 5 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c
index 0cb9b4ef09c7..94bea1bade6f 100644
--- a/drivers/net/phy/marvell10g.c
+++ b/drivers/net/phy/marvell10g.c
@@ -96,6 +96,11 @@  enum {
 	MV_PCS_PORT_INFO_NPORTS_MASK	= 0x0380,
 	MV_PCS_PORT_INFO_NPORTS_SHIFT	= 7,
 
+	/* SerDes reinitialization 88E21X0 */
+	MV_AN_21X0_SERDES_CTRL2	= 0x800f,
+	MV_AN_21X0_SERDES_CTRL2_AUTO_INIT_DIS	= BIT(13),
+	MV_AN_21X0_SERDES_CTRL2_RUN_INIT	= BIT(15),
+
 	/* These registers appear at 0x800X and 0xa00X - the 0xa00X control
 	 * registers appear to set themselves to the 0x800X when AN is
 	 * restarted, but status registers appear readable from either.
@@ -140,6 +145,8 @@  struct mv3310_chip {
 	bool (*has_downshift)(struct phy_device *phydev);
 	void (*init_supported_interfaces)(unsigned long *mask);
 	int (*get_mactype)(struct phy_device *phydev);
+	int (*set_mactype)(struct phy_device *phydev, int mactype);
+	int (*select_mactype)(unsigned long *interfaces);
 	int (*init_interface)(struct phy_device *phydev, int mactype);
 
 #ifdef CONFIG_HWMON
@@ -593,6 +600,49 @@  static int mv2110_get_mactype(struct phy_device *phydev)
 	return mactype & MV_PMA_21X0_PORT_CTRL_MACTYPE_MASK;
 }
 
+static int mv2110_set_mactype(struct phy_device *phydev, int mactype)
+{
+	int err, val;
+
+	mactype &= MV_PMA_21X0_PORT_CTRL_MACTYPE_MASK;
+	err = phy_modify_mmd(phydev, MDIO_MMD_PMAPMD, MV_PMA_21X0_PORT_CTRL,
+			     MV_PMA_21X0_PORT_CTRL_SWRST |
+			     MV_PMA_21X0_PORT_CTRL_MACTYPE_MASK,
+			     MV_PMA_21X0_PORT_CTRL_SWRST | mactype);
+	if (err)
+		return err;
+
+	err = phy_set_bits_mmd(phydev, MDIO_MMD_AN, MV_AN_21X0_SERDES_CTRL2,
+			       MV_AN_21X0_SERDES_CTRL2_AUTO_INIT_DIS |
+			       MV_AN_21X0_SERDES_CTRL2_RUN_INIT);
+	if (err)
+		return err;
+
+	err = phy_read_mmd_poll_timeout(phydev, MDIO_MMD_AN,
+					MV_AN_21X0_SERDES_CTRL2, val,
+					!(val &
+					  MV_AN_21X0_SERDES_CTRL2_RUN_INIT),
+					5000, 100000, true);
+	if (err)
+		return err;
+
+	return phy_clear_bits_mmd(phydev, MDIO_MMD_AN, MV_AN_21X0_SERDES_CTRL2,
+				  MV_AN_21X0_SERDES_CTRL2_AUTO_INIT_DIS);
+}
+
+static int mv2110_select_mactype(unsigned long *interfaces)
+{
+	if (test_bit(PHY_INTERFACE_MODE_USXGMII, interfaces))
+		return MV_PMA_21X0_PORT_CTRL_MACTYPE_USXGMII;
+	else if (test_bit(PHY_INTERFACE_MODE_SGMII, interfaces) &&
+		 !test_bit(PHY_INTERFACE_MODE_10GBASER, interfaces))
+		return MV_PMA_21X0_PORT_CTRL_MACTYPE_5GBASER;
+	else if (test_bit(PHY_INTERFACE_MODE_10GBASER, interfaces))
+		return MV_PMA_21X0_PORT_CTRL_MACTYPE_10GBASER_RATE_MATCH;
+	else
+		return -1;
+}
+
 static int mv3310_get_mactype(struct phy_device *phydev)
 {
 	int mactype;
@@ -604,6 +654,46 @@  static int mv3310_get_mactype(struct phy_device *phydev)
 	return mactype & MV_V2_33X0_PORT_CTRL_MACTYPE_MASK;
 }
 
+static int mv3310_set_mactype(struct phy_device *phydev, int mactype)
+{
+	int ret;
+
+	mactype &= MV_V2_33X0_PORT_CTRL_MACTYPE_MASK;
+	ret = phy_modify_mmd_changed(phydev, MDIO_MMD_VEND2, MV_V2_PORT_CTRL,
+				     MV_V2_33X0_PORT_CTRL_MACTYPE_MASK,
+				     mactype);
+	if (ret <= 0)
+		return ret;
+
+	return phy_set_bits_mmd(phydev, MDIO_MMD_VEND2, MV_V2_PORT_CTRL,
+				MV_V2_33X0_PORT_CTRL_SWRST);
+}
+
+static int mv3310_select_mactype(unsigned long *interfaces)
+{
+	if (test_bit(PHY_INTERFACE_MODE_USXGMII, interfaces))
+		return MV_V2_33X0_PORT_CTRL_MACTYPE_USXGMII;
+	else if (test_bit(PHY_INTERFACE_MODE_SGMII, interfaces) &&
+		 test_bit(PHY_INTERFACE_MODE_10GBASER, interfaces))
+		return MV_V2_33X0_PORT_CTRL_MACTYPE_10GBASER;
+	else if (test_bit(PHY_INTERFACE_MODE_SGMII, interfaces) &&
+		 test_bit(PHY_INTERFACE_MODE_RXAUI, interfaces))
+		return MV_V2_33X0_PORT_CTRL_MACTYPE_RXAUI;
+	else if (test_bit(PHY_INTERFACE_MODE_SGMII, interfaces) &&
+		 test_bit(PHY_INTERFACE_MODE_XAUI, interfaces))
+		return MV_V2_3310_PORT_CTRL_MACTYPE_XAUI;
+	else if (test_bit(PHY_INTERFACE_MODE_10GBASER, interfaces))
+		return MV_V2_33X0_PORT_CTRL_MACTYPE_10GBASER_RATE_MATCH;
+	else if (test_bit(PHY_INTERFACE_MODE_RXAUI, interfaces))
+		return MV_V2_33X0_PORT_CTRL_MACTYPE_RXAUI_RATE_MATCH;
+	else if (test_bit(PHY_INTERFACE_MODE_XAUI, interfaces))
+		return MV_V2_3310_PORT_CTRL_MACTYPE_XAUI_RATE_MATCH;
+	else if (test_bit(PHY_INTERFACE_MODE_SGMII, interfaces))
+		return MV_V2_33X0_PORT_CTRL_MACTYPE_10GBASER;
+	else
+		return -1;
+}
+
 static int mv2110_init_interface(struct phy_device *phydev, int mactype)
 {
 	struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev);
@@ -674,10 +764,16 @@  static int mv3310_config_init(struct phy_device *phydev)
 {
 	struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev);
 	const struct mv3310_chip *chip = to_mv3310_chip(phydev);
+	DECLARE_PHY_INTERFACE_MASK(interfaces);
 	int err, mactype;
 
-	/* Check that the PHY interface type is compatible */
-	if (!test_bit(phydev->interface, priv->supported_interfaces))
+	/* In case host didn't provide supported interfaces */
+	__set_bit(phydev->interface, phydev->host_interfaces);
+
+	/* Check that there is at least one compatible PHY interface type */
+	phy_interface_and(interfaces, phydev->host_interfaces,
+			  priv->supported_interfaces);
+	if (phy_interface_empty(interfaces))
 		return -ENODEV;
 
 	phydev->mdix_ctrl = ETH_TP_MDI_AUTO;
@@ -687,9 +783,15 @@  static int mv3310_config_init(struct phy_device *phydev)
 	if (err)
 		return err;
 
-	mactype = chip->get_mactype(phydev);
-	if (mactype < 0)
-		return mactype;
+	mactype = chip->select_mactype(interfaces);
+	if (mactype < 0) {
+		mactype = chip->get_mactype(phydev);
+	} else {
+		phydev_info(phydev, "Changing MACTYPE to %i\n", mactype);
+		err = chip->set_mactype(phydev, mactype);
+		if (err)
+			return err;
+	}
 
 	err = chip->init_interface(phydev, mactype);
 	if (err) {
@@ -1049,6 +1151,8 @@  static const struct mv3310_chip mv3310_type = {
 	.has_downshift = mv3310_has_downshift,
 	.init_supported_interfaces = mv3310_init_supported_interfaces,
 	.get_mactype = mv3310_get_mactype,
+	.set_mactype = mv3310_set_mactype,
+	.select_mactype = mv3310_select_mactype,
 	.init_interface = mv3310_init_interface,
 
 #ifdef CONFIG_HWMON
@@ -1060,6 +1164,8 @@  static const struct mv3310_chip mv3340_type = {
 	.has_downshift = mv3310_has_downshift,
 	.init_supported_interfaces = mv3340_init_supported_interfaces,
 	.get_mactype = mv3310_get_mactype,
+	.set_mactype = mv3310_set_mactype,
+	.select_mactype = mv3310_select_mactype,
 	.init_interface = mv3340_init_interface,
 
 #ifdef CONFIG_HWMON
@@ -1070,6 +1176,8 @@  static const struct mv3310_chip mv3340_type = {
 static const struct mv3310_chip mv2110_type = {
 	.init_supported_interfaces = mv2110_init_supported_interfaces,
 	.get_mactype = mv2110_get_mactype,
+	.set_mactype = mv2110_set_mactype,
+	.select_mactype = mv2110_select_mactype,
 	.init_interface = mv2110_init_interface,
 
 #ifdef CONFIG_HWMON
@@ -1080,6 +1188,8 @@  static const struct mv3310_chip mv2110_type = {
 static const struct mv3310_chip mv2111_type = {
 	.init_supported_interfaces = mv2111_init_supported_interfaces,
 	.get_mactype = mv2110_get_mactype,
+	.set_mactype = mv2110_set_mactype,
+	.select_mactype = mv2110_select_mactype,
 	.init_interface = mv2110_init_interface,
 
 #ifdef CONFIG_HWMON