@@ -14,8 +14,12 @@ Parameters
* - Name
- Mode
+ - Validation
* - ``enable_roce``
- driverinit
+ * - ``max_macs``
+ - driverinit
+ - The range is between 1 and 2^31. Only power of 2 values are supported.
The ``mlx5`` driver also implements the following driver-specific
parameters.
@@ -752,6 +752,66 @@ static void mlx5_devlink_auxdev_params_unregister(struct devlink *devlink)
mlx5_devlink_eth_param_unregister(devlink);
}
+static int mlx5_devlink_max_uc_list_validate(struct devlink *devlink, u32 id,
+ union devlink_param_value val,
+ struct netlink_ext_ack *extack)
+{
+ struct mlx5_core_dev *dev = devlink_priv(devlink);
+
+ if (val.vu32 == 0) {
+ NL_SET_ERR_MSG_MOD(extack, "max_macs value must be greater than 0");
+ return -EINVAL;
+ }
+
+ if (!is_power_of_2(val.vu32)) {
+ NL_SET_ERR_MSG_MOD(extack, "Only power of 2 values are supported for max_macs");
+ return -EINVAL;
+ }
+
+ if (ilog2(val.vu32) >
+ MLX5_CAP_GEN_MAX(dev, log_max_current_uc_list)) {
+ NL_SET_ERR_MSG_MOD(extack, "max_macs value is out of the supported range");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static const struct devlink_param max_uc_list_param =
+ DEVLINK_PARAM_GENERIC(MAX_MACS, BIT(DEVLINK_PARAM_CMODE_DRIVERINIT),
+ NULL, NULL, mlx5_devlink_max_uc_list_validate);
+
+static int mlx5_devlink_max_uc_list_param_register(struct devlink *devlink)
+{
+ struct mlx5_core_dev *dev = devlink_priv(devlink);
+ union devlink_param_value value;
+ int err;
+
+ if (!MLX5_CAP_GEN_MAX(dev, log_max_current_uc_list_wr_supported))
+ return 0;
+
+ err = devlink_param_register(devlink, &max_uc_list_param);
+ if (err)
+ return err;
+
+ value.vu32 = 1 << MLX5_CAP_GEN(dev, log_max_current_uc_list);
+ devlink_param_driverinit_value_set(devlink,
+ DEVLINK_PARAM_GENERIC_ID_MAX_MACS,
+ value);
+ return 0;
+}
+
+static void
+mlx5_devlink_max_uc_list_param_unregister(struct devlink *devlink)
+{
+ struct mlx5_core_dev *dev = devlink_priv(devlink);
+
+ if (!MLX5_CAP_GEN(dev, log_max_current_uc_list_wr_supported))
+ return;
+
+ devlink_param_unregister(devlink, &max_uc_list_param);
+}
+
#define MLX5_TRAP_DROP(_id, _group_id) \
DEVLINK_TRAP_GENERIC(DROP, DROP, _id, \
DEVLINK_TRAP_GROUP_GENERIC_ID_##_group_id, \
@@ -815,11 +875,17 @@ int mlx5_devlink_register(struct devlink *devlink)
if (err)
goto traps_reg_err;
+ err = mlx5_devlink_max_uc_list_param_register(devlink);
+ if (err)
+ goto uc_list_reg_err;
+
if (!mlx5_core_is_mp_slave(dev))
devlink_set_features(devlink, DEVLINK_F_RELOAD);
return 0;
+uc_list_reg_err:
+ mlx5_devlink_traps_unregister(devlink);
traps_reg_err:
mlx5_devlink_auxdev_params_unregister(devlink);
auxdev_reg_err:
@@ -830,6 +896,7 @@ int mlx5_devlink_register(struct devlink *devlink)
void mlx5_devlink_unregister(struct devlink *devlink)
{
+ mlx5_devlink_max_uc_list_param_unregister(devlink);
mlx5_devlink_traps_unregister(devlink);
mlx5_devlink_auxdev_params_unregister(devlink);
devlink_params_unregister(devlink, mlx5_devlink_params,
@@ -484,10 +484,23 @@ static int handle_hca_cap_odp(struct mlx5_core_dev *dev, void *set_ctx)
return set_caps(dev, set_ctx, MLX5_SET_HCA_CAP_OP_MOD_ODP);
}
+static int max_uc_list_get_devlink_param(struct mlx5_core_dev *dev)
+{
+ struct devlink *devlink = priv_to_devlink(dev);
+ union devlink_param_value val;
+ int err;
+
+ err = devlink_param_driverinit_value_get(devlink,
+ DEVLINK_PARAM_GENERIC_ID_MAX_MACS,
+ &val);
+ return err ? err : val.vu32;
+}
+
static int handle_hca_cap(struct mlx5_core_dev *dev, void *set_ctx)
{
struct mlx5_profile *prof = &dev->profile;
void *set_hca_cap;
+ int max_uc_list;
int err;
err = mlx5_core_get_caps(dev, MLX5_CAP_GENERAL);
@@ -561,6 +574,11 @@ static int handle_hca_cap(struct mlx5_core_dev *dev, void *set_ctx)
if (MLX5_CAP_GEN(dev, roce_rw_supported))
MLX5_SET(cmd_hca_cap, set_hca_cap, roce, mlx5_is_roce_init_enabled(dev));
+ max_uc_list = max_uc_list_get_devlink_param(dev);
+ if (max_uc_list > 0)
+ MLX5_SET(cmd_hca_cap, set_hca_cap, log_max_current_uc_list,
+ ilog2(max_uc_list));
+
return set_caps(dev, set_ctx, MLX5_SET_HCA_CAP_OP_MOD_GENERAL_DEVICE);
}
@@ -1621,7 +1621,7 @@ struct mlx5_ifc_cmd_hca_cap_bits {
u8 ext_stride_num_range[0x1];
u8 roce_rw_supported[0x1];
- u8 reserved_at_3a2[0x1];
+ u8 log_max_current_uc_list_wr_supported[0x1];
u8 log_max_stride_sz_rq[0x5];
u8 reserved_at_3a8[0x3];
u8 log_min_stride_sz_rq[0x5];
Currently, max_macs is taking 70Kbytes of memory per function. This size is not needed in all use cases, and is critical with large scale. Hence, allow user to configure the number of max_macs. For example, to reduce the number of max_macs to 1, execute:: $ devlink dev param set pci/0000:00:0b.0 name max_macs value 1 \ cmode driverinit $ devlink dev reload pci/0000:00:0b.0 Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Parav Pandit <parav@nvidia.com> --- Documentation/networking/devlink/mlx5.rst | 4 ++ .../net/ethernet/mellanox/mlx5/core/devlink.c | 67 +++++++++++++++++++ .../net/ethernet/mellanox/mlx5/core/main.c | 18 +++++ include/linux/mlx5/mlx5_ifc.h | 2 +- 4 files changed, 90 insertions(+), 1 deletion(-)