diff mbox series

[net-next,v5,3/4] net: ocelot: add support for ndo_change_mtu

Message ID 20211207090853.308328-4-clement.leger@bootlin.com (mailing list archive)
State Superseded
Delegated to: Netdev Maintainers
Headers show
Series Add FDMA support on ocelot switch driver | expand

Checks

Context Check Description
netdev/tree_selection success Clearly marked for net-next
netdev/fixes_present success Fixes tag not required for -next series
netdev/subject_prefix success Link
netdev/cover_letter success Series has a cover letter
netdev/patch_count success Link
netdev/header_inline success No static functions without inline keyword in header files
netdev/build_32bit success Errors and warnings before: 0 this patch: 0
netdev/cc_maintainers success CCed 7 of 7 maintainers
netdev/build_clang success Errors and warnings before: 0 this patch: 0
netdev/module_param success Was 0 now: 0
netdev/verify_signedoff success Signed-off-by tag matches author and committer
netdev/verify_fixes success No Fixes tag
netdev/build_allmodconfig_warn success Errors and warnings before: 0 this patch: 0
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 38 lines checked
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/source_inline success Was 0 now: 0

Commit Message

Clément Léger Dec. 7, 2021, 9:08 a.m. UTC 
This commit adds support for changing MTU for the ocelot register based
interface. For ocelot, JUMBO frame size can be set up to 25000 bytes
but has been set to 9000 which is a saner value and allows for maximum
gain of performance with FDMA.

Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
---
 drivers/net/ethernet/mscc/ocelot.h     |  2 ++
 drivers/net/ethernet/mscc/ocelot_net.c | 14 ++++++++++++++
 2 files changed, 16 insertions(+)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/mscc/ocelot.h b/drivers/net/ethernet/mscc/ocelot.h
index 1eb0b5ad51e9..bf4eff6d7086 100644
--- a/drivers/net/ethernet/mscc/ocelot.h
+++ b/drivers/net/ethernet/mscc/ocelot.h
@@ -32,6 +32,8 @@ 
 
 #define OCELOT_PTP_QUEUE_SZ	128
 
+#define OCELOT_JUMBO_MTU	9000
+
 struct ocelot_port_tc {
 	bool block_shared;
 	unsigned long offload_cnt;
diff --git a/drivers/net/ethernet/mscc/ocelot_net.c b/drivers/net/ethernet/mscc/ocelot_net.c
index d9694dc14a2d..d83d3ffba3ac 100644
--- a/drivers/net/ethernet/mscc/ocelot_net.c
+++ b/drivers/net/ethernet/mscc/ocelot_net.c
@@ -764,10 +764,23 @@  static int ocelot_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 	return phy_mii_ioctl(dev->phydev, ifr, cmd);
 }
 
+static int ocelot_change_mtu(struct net_device *dev, int new_mtu)
+{
+	struct ocelot_port_private *priv = netdev_priv(dev);
+	struct ocelot_port *ocelot_port = &priv->port;
+	struct ocelot *ocelot = ocelot_port->ocelot;
+
+	ocelot_port_set_maxlen(ocelot, priv->chip_port, new_mtu);
+	WRITE_ONCE(dev->mtu, new_mtu);
+
+	return 0;
+}
+
 static const struct net_device_ops ocelot_port_netdev_ops = {
 	.ndo_open			= ocelot_port_open,
 	.ndo_stop			= ocelot_port_stop,
 	.ndo_start_xmit			= ocelot_port_xmit,
+	.ndo_change_mtu			= ocelot_change_mtu,
 	.ndo_set_rx_mode		= ocelot_set_rx_mode,
 	.ndo_set_mac_address		= ocelot_port_set_mac_address,
 	.ndo_get_stats64		= ocelot_get_stats64,
@@ -1670,6 +1683,7 @@  int ocelot_probe_port(struct ocelot *ocelot, int port, struct regmap *target,
 
 	dev->netdev_ops = &ocelot_port_netdev_ops;
 	dev->ethtool_ops = &ocelot_ethtool_ops;
+	dev->max_mtu = OCELOT_JUMBO_MTU;
 
 	dev->hw_features |= NETIF_F_HW_VLAN_CTAG_FILTER | NETIF_F_RXFCS |
 		NETIF_F_HW_TC;