diff mbox series

net: dsa: bcm_sf2: refactor LED regs access

Message ID 20211228220951.17751-1-zajec5@gmail.com (mailing list archive)
State Superseded
Delegated to: Netdev Maintainers
Headers show
Series net: dsa: bcm_sf2: refactor LED regs access | expand

Checks

Context Check Description
netdev/fixes_present success Fixes tag not required for -next series
netdev/subject_prefix warning Target tree name not specified in the subject
netdev/cover_letter success Single patches do not need cover letters
netdev/patch_count success Link
netdev/header_inline success No static functions without inline keyword in header files
netdev/build_32bit success Errors and warnings before: 0 this patch: 0
netdev/cc_maintainers success CCed 7 of 7 maintainers
netdev/build_clang success Errors and warnings before: 0 this patch: 0
netdev/module_param success Was 0 now: 0
netdev/verify_signedoff success Signed-off-by tag matches author and committer
netdev/verify_fixes success No Fixes tag
netdev/build_allmodconfig_warn success Errors and warnings before: 0 this patch: 0
netdev/checkpatch warning CHECK: Prefer using the BIT macro WARNING: line length of 87 exceeds 80 columns
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/source_inline success Was 0 now: 0
netdev/tree_selection success Guessing tree name failed - patch did not apply

Commit Message

Rafał Miłecki Dec. 28, 2021, 10:09 p.m. UTC
From: Rafał Miłecki <rafal@milecki.pl>

1. Define more regs. Some switches (e.g. BCM4908) have up to 6 regs.
2. Add helper for handling non-lineral port <-> reg mappings.
3. Add support for 12 B LED reg blocks on BCM4908 (different layout)

Complete support for LEDs setup will be implemented once Linux receives
a proper design & implementation for "hardware" LEDs.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
 drivers/net/dsa/bcm_sf2.c      | 60 +++++++++++++++++++++++++++----
 drivers/net/dsa/bcm_sf2.h      | 10 ++++++
 drivers/net/dsa/bcm_sf2_regs.h | 65 +++++++++++++++++++++++++++++++---
 3 files changed, 125 insertions(+), 10 deletions(-)

Comments

Florian Fainelli Dec. 29, 2021, 4:40 p.m. UTC | #1
On 12/28/2021 2:09 PM, Rafał Miłecki wrote:
> From: Rafał Miłecki <rafal@milecki.pl>
> 
> 1. Define more regs. Some switches (e.g. BCM4908) have up to 6 regs.
> 2. Add helper for handling non-lineral port <-> reg mappings.
> 3. Add support for 12 B LED reg blocks on BCM4908 (different layout)
> 
> Complete support for LEDs setup will be implemented once Linux receives
> a proper design & implementation for "hardware" LEDs.
> 
> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

This looks good for the most part, just one nit below:

> ---
>   drivers/net/dsa/bcm_sf2.c      | 60 +++++++++++++++++++++++++++----
>   drivers/net/dsa/bcm_sf2.h      | 10 ++++++
>   drivers/net/dsa/bcm_sf2_regs.h | 65 +++++++++++++++++++++++++++++++---
>   3 files changed, 125 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
> index 13aa43b5cffd..c2447de9d441 100644
> --- a/drivers/net/dsa/bcm_sf2.c
> +++ b/drivers/net/dsa/bcm_sf2.c
> @@ -62,6 +62,44 @@ static u16 bcm_sf2_reg_rgmii_cntrl(struct bcm_sf2_priv *priv, int port)
>   	return REG_SWITCH_STATUS;
>   }
>   
> +static u16 bcm_sf2_reg_led_base(struct bcm_sf2_priv *priv, int port)
> +{
> +	switch (priv->type) {
> +	case BCM4908_DEVICE_ID:
> +		switch (port) {
> +		case 0:
> +			return REG_LED_0_CNTRL;
> +		case 1:
> +			return REG_LED_1_CNTRL;
> +		case 2:
> +			return REG_LED_2_CNTRL;

Up until that port count, we have a common path, it is only after port > 
2 that we stop having a common path. Only BCM7445 and BCM7278 have two 
external ports, 63138 (and 63148 when that gets added eventually) as 
well as a 4908 have more ports, so I would do something like this:

switch (port) {
case 0:
	return REG_LED_0_CNTRL;
case 1:
	return REG_LED_1_CNTRL;
case 2:
	return REG_LED_2_CNTRL;
default:
	break;
}

if (priv->type == BCM7445_DEVICE_ID || priv->type == BCM7278_DEVICE_ID)
	goto out;

Also, this LED controller is also present in the GENETv5 adapters, so we 
may have some value in writing a common LED framework driver for it at 
some point.

Thanks!
diff mbox series

Patch

diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index 13aa43b5cffd..c2447de9d441 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -62,6 +62,44 @@  static u16 bcm_sf2_reg_rgmii_cntrl(struct bcm_sf2_priv *priv, int port)
 	return REG_SWITCH_STATUS;
 }
 
+static u16 bcm_sf2_reg_led_base(struct bcm_sf2_priv *priv, int port)
+{
+	switch (priv->type) {
+	case BCM4908_DEVICE_ID:
+		switch (port) {
+		case 0:
+			return REG_LED_0_CNTRL;
+		case 1:
+			return REG_LED_1_CNTRL;
+		case 2:
+			return REG_LED_2_CNTRL;
+		case 3:
+			return REG_LED_3_CNTRL;
+		case 7:
+			return REG_LED_4_CNTRL;
+		default:
+			break;
+		}
+		break;
+	default:
+		switch (port) {
+		case 0:
+			return REG_LED_0_CNTRL;
+		case 1:
+			return REG_LED_1_CNTRL;
+		case 2:
+			return REG_LED_2_CNTRL;
+		default:
+			break;
+		}
+	}
+
+	WARN_ONCE(1, "Unsupported port %d\n", port);
+
+	/* RO fallback reg */
+	return REG_SWITCH_STATUS;
+}
+
 /* Return the number of active ports, not counting the IMP (CPU) port */
 static unsigned int bcm_sf2_num_active_ports(struct dsa_switch *ds)
 {
@@ -187,9 +225,14 @@  static void bcm_sf2_gphy_enable_set(struct dsa_switch *ds, bool enable)
 
 	/* Use PHY-driven LED signaling */
 	if (!enable) {
-		reg = reg_readl(priv, REG_LED_CNTRL(0));
-		reg |= SPDLNK_SRC_SEL;
-		reg_writel(priv, reg, REG_LED_CNTRL(0));
+		u16 led_ctrl = bcm_sf2_reg_led_base(priv, 0);
+
+		if (priv->type == BCM7278_DEVICE_ID ||
+		    priv->type == BCM7445_DEVICE_ID) {
+			reg = reg_led_readl(priv, led_ctrl, 0);
+			reg |= LED_CNTRL_SPDLNK_SRC_SEL;
+			reg_led_writel(priv, reg, led_ctrl, 0);
+		}
 	}
 }
 
@@ -1232,9 +1275,14 @@  static const u16 bcm_sf2_4908_reg_offsets[] = {
 	[REG_SPHY_CNTRL]	= 0x24,
 	[REG_CROSSBAR]		= 0xc8,
 	[REG_RGMII_11_CNTRL]	= 0x014c,
-	[REG_LED_0_CNTRL]	= 0x40,
-	[REG_LED_1_CNTRL]	= 0x4c,
-	[REG_LED_2_CNTRL]	= 0x58,
+	[REG_LED_0_CNTRL]		= 0x40,
+	[REG_LED_1_CNTRL]		= 0x4c,
+	[REG_LED_2_CNTRL]		= 0x58,
+	[REG_LED_3_CNTRL]		= 0x64,
+	[REG_LED_4_CNTRL]		= 0x88,
+	[REG_LED_5_CNTRL]		= 0xa0,
+	[REG_LED_AGGREGATE_CTRL]	= 0xb8,
+
 };
 
 static const struct bcm_sf2_of_data bcm_sf2_4908_data = {
diff --git a/drivers/net/dsa/bcm_sf2.h b/drivers/net/dsa/bcm_sf2.h
index 0d48402068d3..00afc94ce522 100644
--- a/drivers/net/dsa/bcm_sf2.h
+++ b/drivers/net/dsa/bcm_sf2.h
@@ -210,6 +210,16 @@  SF2_IO_MACRO(acb);
 SWITCH_INTR_L2(0);
 SWITCH_INTR_L2(1);
 
+static inline u32 reg_led_readl(struct bcm_sf2_priv *priv, u16 off, u16 reg)
+{
+	return readl_relaxed(priv->reg + priv->reg_offsets[off] + reg);
+}
+
+static inline void reg_led_writel(struct bcm_sf2_priv *priv, u32 val, u16 off, u16 reg)
+{
+	writel_relaxed(val, priv->reg + priv->reg_offsets[off] + reg);
+}
+
 /* RXNFC */
 int bcm_sf2_get_rxnfc(struct dsa_switch *ds, int port,
 		      struct ethtool_rxnfc *nfc, u32 *rule_locs);
diff --git a/drivers/net/dsa/bcm_sf2_regs.h b/drivers/net/dsa/bcm_sf2_regs.h
index 7bffc80f241f..da0dedbd6555 100644
--- a/drivers/net/dsa/bcm_sf2_regs.h
+++ b/drivers/net/dsa/bcm_sf2_regs.h
@@ -25,6 +25,10 @@  enum bcm_sf2_reg_offs {
 	REG_LED_0_CNTRL,
 	REG_LED_1_CNTRL,
 	REG_LED_2_CNTRL,
+	REG_LED_3_CNTRL,
+	REG_LED_4_CNTRL,
+	REG_LED_5_CNTRL,
+	REG_LED_AGGREGATE_CTRL,
 	REG_SWITCH_REG_MAX,
 };
 
@@ -56,6 +60,63 @@  enum bcm_sf2_reg_offs {
 #define CROSSBAR_BCM4908_EXT_GPHY4	1
 #define CROSSBAR_BCM4908_EXT_RGMII	2
 
+/* Relative to REG_LED_*_CNTRL (BCM7278, BCM7445) */
+#define  LED_CNTRL_NO_LINK_ENCODE_SHIFT		0
+#define  LED_CNTRL_M10_ENCODE_SHIFT		2
+#define  LED_CNTRL_M100_ENCODE_SHIFT		4
+#define  LED_CNTRL_M1000_ENCODE_SHIFT		6
+#define  LED_CNTRL_SEL_NO_LINK_ENCODE_SHIFT	8
+#define  LED_CNTRL_SEL_10M_ENCODE_SHIFT		10
+#define  LED_CNTRL_SEL_100M_ENCODE_SHIFT	12
+#define  LED_CNTRL_SEL_1000M_ENCODE_SHIFT	14
+#define  LED_CNTRL_RX_DV_EN			(1 << 16)
+#define  LED_CNTRL_TX_EN_EN			(1 << 17)
+#define  LED_CNTRL_SPDLNK_LED0_ACT_SEL_SHIFT	18
+#define  LED_CNTRL_SPDLNK_LED1_ACT_SEL_SHIFT	20
+#define  LED_CNTRL_ACT_LED_ACT_SEL_SHIFT	22
+#define  LED_CNTRL_SPDLNK_SRC_SEL		(1 << 24)
+#define  LED_CNTRL_SPDLNK_LED0_ACT_POL_SEL	(1 << 25)
+#define  LED_CNTRL_SPDLNK_LED1_ACT_POL_SEL	(1 << 26)
+#define  LED_CNTRL_ACT_LED_POL_SEL		(1 << 27)
+#define  LED_CNTRL_MASK				0x3
+
+/* Register relative to REG_LED_*_CNTRL (BCM4908) */
+#define REG_LED_CTRL				0x0
+#define  LED_CTRL_RX_ACT_EN			0x00000001
+#define  LED_CTRL_TX_ACT_EN			0x00000002
+#define  LED_CTRL_SPDLNK_LED0_ACT_SEL		0x00000004
+#define  LED_CTRL_SPDLNK_LED1_ACT_SEL		0x00000008
+#define  LED_CTRL_SPDLNK_LED2_ACT_SEL		0x00000010
+#define  LED_CTRL_ACT_LED_ACT_SEL		0x00000020
+#define  LED_CTRL_SPDLNK_LED0_ACT_POL_SEL	0x00000040
+#define  LED_CTRL_SPDLNK_LED1_ACT_POL_SEL	0x00000080
+#define  LED_CTRL_SPDLNK_LED2_ACT_POL_SEL	0x00000100
+#define  LED_CTRL_ACT_LED_POL_SEL		0x00000200
+#define  LED_CTRL_LED_SPD_OVRD			0x00001c00
+#define  LED_CTRL_LNK_STATUS_OVRD		0x00002000
+#define  LED_CTRL_SPD_OVRD_EN			0x00004000
+#define  LED_CTRL_LNK_OVRD_EN			0x00008000
+
+/* Register relative to REG_LED_*_CNTRL (BCM4908) */
+#define REG_LED_LINK_SPEED_ENC_SEL		0x4
+#define  LED_LINK_SPEED_ENC_SEL_NO_LINK_SHIFT	0
+#define  LED_LINK_SPEED_ENC_SEL_10M_SHIFT	3
+#define  LED_LINK_SPEED_ENC_SEL_100M_SHIFT	6
+#define  LED_LINK_SPEED_ENC_SEL_1000M_SHIFT	9
+#define  LED_LINK_SPEED_ENC_SEL_2500M_SHIFT	12
+#define  LED_LINK_SPEED_ENC_SEL_10G_SHIFT	15
+#define  LED_LINK_SPEED_ENC_SEL_MASK		0x7
+
+/* Register relative to REG_LED_*_CNTRL (BCM4908) */
+#define REG_LED_LINK_SPEED_ENC			0x8
+#define  LED_LINK_SPEED_ENC_NO_LINK_SHIFT	0
+#define  LED_LINK_SPEED_ENC_M10_SHIFT		3
+#define  LED_LINK_SPEED_ENC_M100_SHIFT		6
+#define  LED_LINK_SPEED_ENC_M1000_SHIFT		9
+#define  LED_LINK_SPEED_ENC_M2500_SHIFT		12
+#define  LED_LINK_SPEED_ENC_M10G_SHIFT		15
+#define  LED_LINK_SPEED_ENC_MASK		0x7
+
 /* Relative to REG_RGMII_CNTRL */
 #define  RGMII_MODE_EN			(1 << 0)
 #define  ID_MODE_DIS			(1 << 1)
@@ -73,10 +134,6 @@  enum bcm_sf2_reg_offs {
 #define  LPI_COUNT_SHIFT		9
 #define  LPI_COUNT_MASK			0x3F
 
-#define REG_LED_CNTRL(x)		(REG_LED_0_CNTRL + (x))
-
-#define  SPDLNK_SRC_SEL			(1 << 24)
-
 /* Register set relative to 'INTRL2_0' and 'INTRL2_1' */
 #define INTRL2_CPU_STATUS		0x00
 #define INTRL2_CPU_SET			0x04