@@ -63,21 +63,25 @@ sfp3: sfp-3 {
&dpmac7 {
sfp = <&sfp0>;
managed = "in-band-status";
+ phys = <&serdes1_lane_d>;
};
&dpmac8 {
sfp = <&sfp1>;
managed = "in-band-status";
+ phys = <&serdes1_lane_c>;
};
&dpmac9 {
sfp = <&sfp2>;
managed = "in-band-status";
+ phys = <&serdes1_lane_b>;
};
&dpmac10 {
sfp = <&sfp3>;
managed = "in-band-status";
+ phys = <&serdes1_lane_a>;
};
&emdio2 {
@@ -612,6 +612,47 @@ soc {
ranges;
dma-ranges = <0x0 0x0 0x0 0x0 0x10000 0x00000000>;
+ serdes_1: serdes_phy@1ea0000 {
+ compatible = "fsl,lynx-28g";
+ reg = <0x00 0x1ea0000 0x0 0x1e30>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #phy-cells = <1>;
+
+ serdes1_lane_a: phy@0 {
+ reg = <0>;
+ #phy-cells = <0>;
+ };
+ serdes1_lane_b: phy@1 {
+ reg = <1>;
+ #phy-cells = <0>;
+ };
+ serdes1_lane_c: phy@2 {
+ reg = <2>;
+ #phy-cells = <0>;
+ };
+ serdes1_lane_d: phy@3 {
+ reg = <3>;
+ #phy-cells = <0>;
+ };
+ serdes1_lane_e: phy@4 {
+ reg = <4>;
+ #phy-cells = <0>;
+ };
+ serdes1_lane_f: phy@5 {
+ reg = <5>;
+ #phy-cells = <0>;
+ };
+ serdes1_lane_g: phy@6 {
+ reg = <6>;
+ #phy-cells = <0>;
+ };
+ serdes1_lane_h: phy@7 {
+ reg = <7>;
+ #phy-cells = <0>;
+ };
+ };
+
crypto: crypto@8000000 {
compatible = "fsl,sec-v5.0", "fsl,sec-v4.0";
fsl,sec-era = <10>;
Describe the SerDes block #1 using the generic phys infrastructure. This way, the ethernet nodes can each reference their serdes lanes individually using the 'phys' dts property. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> --- Changes in v2: - none .../freescale/fsl-lx2160a-clearfog-itx.dtsi | 4 ++ .../arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 41 +++++++++++++++++++ 2 files changed, 45 insertions(+)