diff mbox series

ixgbe: Manual AN-37 for troublesome link partners for X550 SFI

Message ID 20220316192458.9847-1-jeffd@silicom-usa.com (mailing list archive)
State Superseded
Delegated to: Netdev Maintainers
Headers show
Series ixgbe: Manual AN-37 for troublesome link partners for X550 SFI | expand

Checks

Context Check Description
netdev/fixes_present success Fixes tag not required for -next series
netdev/subject_prefix warning Target tree name not specified in the subject
netdev/cover_letter success Single patches do not need cover letters
netdev/patch_count success Link
netdev/header_inline success No static functions without inline keyword in header files
netdev/build_32bit success Errors and warnings before: 1 this patch: 1
netdev/cc_maintainers success CCed 6 of 6 maintainers
netdev/build_clang success Errors and warnings before: 0 this patch: 0
netdev/module_param success Was 0 now: 0
netdev/verify_signedoff success Signed-off-by tag matches author and committer
netdev/verify_fixes success No Fixes tag
netdev/build_allmodconfig_warn success Errors and warnings before: 1 this patch: 1
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 72 lines checked
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/source_inline success Was 0 now: 0
netdev/tree_selection success Guessing tree name failed - patch did not apply

Commit Message

Jeff Daly March 16, 2022, 7:24 p.m. UTC 
Some (Juniper MX5) SFP link partners exhibit a disinclination to
autonegotiate with X550 configured in SFI mode.  This patch enables
a manual AN-37 restart to work around the problem.

Signed-off-by: Jeff Daly <jeffd@silicom-usa.com>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_type.h |  3 ++
 drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c | 50 +++++++++++++++++++
 2 files changed, 53 insertions(+)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
index 2647937f7f4d..dc8a259fda5f 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
@@ -3705,7 +3705,9 @@  struct ixgbe_info {
 #define IXGBE_KRM_LINK_S1(P)		((P) ? 0x8200 : 0x4200)
 #define IXGBE_KRM_LINK_CTRL_1(P)	((P) ? 0x820C : 0x420C)
 #define IXGBE_KRM_AN_CNTL_1(P)		((P) ? 0x822C : 0x422C)
+#define IXGBE_KRM_AN_CNTL_4(P)		((P) ? 0x8238 : 0x4238)
 #define IXGBE_KRM_AN_CNTL_8(P)		((P) ? 0x8248 : 0x4248)
+#define IXGBE_KRM_PCS_KX_AN(P)		((P) ? 0x9918 : 0x5918)
 #define IXGBE_KRM_SGMII_CTRL(P)		((P) ? 0x82A0 : 0x42A0)
 #define IXGBE_KRM_LP_BASE_PAGE_HIGH(P)	((P) ? 0x836C : 0x436C)
 #define IXGBE_KRM_DSP_TXFFE_STATE_4(P)	((P) ? 0x8634 : 0x4634)
@@ -3715,6 +3717,7 @@  struct ixgbe_info {
 #define IXGBE_KRM_PMD_FLX_MASK_ST20(P)	((P) ? 0x9054 : 0x5054)
 #define IXGBE_KRM_TX_COEFF_CTRL_1(P)	((P) ? 0x9520 : 0x5520)
 #define IXGBE_KRM_RX_ANA_CTL(P)		((P) ? 0x9A00 : 0x5A00)
+#define IXGBE_KRM_FLX_TMRS_CTRL_ST31(P)	((P) ? 0x9180 : 0x5180)
 
 #define IXGBE_KRM_PMD_FLX_MASK_ST20_SFI_10G_DA		~(0x3 << 20)
 #define IXGBE_KRM_PMD_FLX_MASK_ST20_SFI_10G_SR		BIT(20)
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
index e4b50c7781ff..f48a422ae83f 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
@@ -1725,6 +1725,56 @@  static s32 ixgbe_setup_sfi_x550a(struct ixgbe_hw *hw, ixgbe_link_speed *speed)
 				IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id),
 				IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
 
+	/* change mode enforcement rules to hybrid */
+	status = mac->ops.read_iosf_sb_reg(hw,
+				IXGBE_KRM_FLX_TMRS_CTRL_ST31(hw->bus.lan_id),
+				IXGBE_SB_IOSF_TARGET_KR_PHY, &reg_val);
+	reg_val |= 0x0400;
+
+	status = mac->ops.write_iosf_sb_reg(hw,
+				IXGBE_KRM_FLX_TMRS_CTRL_ST31(hw->bus.lan_id),
+				IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
+
+	/* manually control the config */
+	status = mac->ops.read_iosf_sb_reg(hw,
+				IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
+				IXGBE_SB_IOSF_TARGET_KR_PHY, &reg_val);
+	reg_val |= 0x20002240;
+
+	status = mac->ops.write_iosf_sb_reg(hw,
+				IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
+				IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
+
+	/* move the AN base page values */
+	status = mac->ops.read_iosf_sb_reg(hw,
+				IXGBE_KRM_PCS_KX_AN(hw->bus.lan_id),
+				IXGBE_SB_IOSF_TARGET_KR_PHY, &reg_val);
+	reg_val |= 0x1;
+
+	status = mac->ops.write_iosf_sb_reg(hw,
+				IXGBE_KRM_PCS_KX_AN(hw->bus.lan_id),
+				IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
+
+	/* set the AN37 over CB mode */
+	status = mac->ops.read_iosf_sb_reg(hw,
+				IXGBE_KRM_AN_CNTL_4(hw->bus.lan_id),
+				IXGBE_SB_IOSF_TARGET_KR_PHY, &reg_val);
+	reg_val |= 0x20000000;
+
+	status = mac->ops.write_iosf_sb_reg(hw,
+				IXGBE_KRM_AN_CNTL_4(hw->bus.lan_id),
+				IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
+
+	/* restart AN manually */
+	status = mac->ops.read_iosf_sb_reg(hw,
+				IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
+				IXGBE_SB_IOSF_TARGET_KR_PHY, &reg_val);
+	reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_RESTART;
+
+	status = mac->ops.write_iosf_sb_reg(hw,
+				IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
+				IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
+
 	/* Toggle port SW reset by AN reset. */
 	status = ixgbe_restart_an_internal_phy_x550em(hw);