From patchwork Thu Mar 24 11:26:18 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Alexandru Tachici X-Patchwork-Id: 12790604 X-Patchwork-Delegate: kuba@kernel.org Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id CF3E2C433F5 for ; Thu, 24 Mar 2022 11:17:47 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1349772AbiCXLTR (ORCPT ); Thu, 24 Mar 2022 07:19:17 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:41472 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1349732AbiCXLTL (ORCPT ); Thu, 24 Mar 2022 07:19:11 -0400 Received: from mx0a-00128a01.pphosted.com (mx0a-00128a01.pphosted.com [148.163.135.77]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 6C4D9A66E3; Thu, 24 Mar 2022 04:17:39 -0700 (PDT) Received: from pps.filterd (m0167089.ppops.net [127.0.0.1]) by mx0a-00128a01.pphosted.com (8.16.1.2/8.16.1.2) with ESMTP id 22OAlAUc015861; Thu, 24 Mar 2022 07:17:16 -0400 Received: from nwd2mta3.analog.com ([137.71.173.56]) by mx0a-00128a01.pphosted.com (PPS) with ESMTPS id 3f0denc07d-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Thu, 24 Mar 2022 07:17:16 -0400 Received: from ASHBMBX9.ad.analog.com (ASHBMBX9.ad.analog.com [10.64.17.10]) by nwd2mta3.analog.com (8.14.7/8.14.7) with ESMTP id 22OBHFv9047116 (version=TLSv1/SSLv3 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=FAIL); Thu, 24 Mar 2022 07:17:15 -0400 Received: from ASHBCASHYB4.ad.analog.com (10.64.17.132) by ASHBMBX9.ad.analog.com (10.64.17.10) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.14; Thu, 24 Mar 2022 07:17:14 -0400 Received: from ASHBMBX9.ad.analog.com (10.64.17.10) by ASHBCASHYB4.ad.analog.com (10.64.17.132) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.14; Thu, 24 Mar 2022 07:17:13 -0400 Received: from zeus.spd.analog.com (10.66.68.11) by ashbmbx9.ad.analog.com (10.64.17.10) with Microsoft SMTP Server id 15.2.986.14 via Frontend Transport; Thu, 24 Mar 2022 07:17:13 -0400 Received: from localhost.localdomain ([10.48.65.12]) by zeus.spd.analog.com (8.15.1/8.15.1) with ESMTP id 22OBGjPe000657; Thu, 24 Mar 2022 07:17:07 -0400 From: To: CC: , , , , , , , , , , Alexandru Ardelean Subject: [PATCH v5 5/7] net: phy: adin1100: Add initial support for ADIN1100 industrial PHY Date: Thu, 24 Mar 2022 13:26:18 +0200 Message-ID: <20220324112620.46963-6-alexandru.tachici@analog.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20220324112620.46963-1-alexandru.tachici@analog.com> References: <20220324112620.46963-1-alexandru.tachici@analog.com> MIME-Version: 1.0 X-ADIRuleOP-NewSCL: Rule Triggered X-Proofpoint-GUID: v0IxOmnf7Dhsy_POuZvpewN3q_I9QzVJ X-Proofpoint-ORIG-GUID: v0IxOmnf7Dhsy_POuZvpewN3q_I9QzVJ X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.205,Aquarius:18.0.850,Hydra:6.0.425,FMLib:17.11.64.514 definitions=2022-03-24_03,2022-03-24_01,2022-02-23_01 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 spamscore=0 impostorscore=0 malwarescore=0 mlxlogscore=895 priorityscore=1501 adultscore=0 bulkscore=0 clxscore=1015 suspectscore=0 mlxscore=0 phishscore=0 lowpriorityscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.12.0-2202240000 definitions=main-2203240067 Precedence: bulk List-ID: X-Mailing-List: netdev@vger.kernel.org X-Patchwork-Delegate: kuba@kernel.org From: Alexandru Ardelean The ADIN1100 is a low power single port 10BASE-T1L transceiver designed for industrial Ethernet applications and is compliant with the IEEE 802.3cg Ethernet standard for long reach 10 Mb/s Single Pair Ethernet. Signed-off-by: Alexandru Ardelean Signed-off-by: Alexandru Tachici --- drivers/net/phy/Kconfig | 7 ++ drivers/net/phy/Makefile | 1 + drivers/net/phy/adin1100.c | 247 +++++++++++++++++++++++++++++++++++++ 3 files changed, 255 insertions(+) create mode 100644 drivers/net/phy/adin1100.c diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index ea7571a2b39b..bbbf6c07ea53 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -83,6 +83,13 @@ config ADIN_PHY - ADIN1300 - Robust,Industrial, Low Latency 10/100/1000 Gigabit Ethernet PHY +config ADIN1100_PHY + tristate "Analog Devices Industrial Ethernet T1L PHYs" + help + Adds support for the Analog Devices Industrial T1L Ethernet PHYs. + Currently supports the: + - ADIN1100 - Robust,Industrial, Low Power 10BASE-T1L Ethernet PHY + config AQUANTIA_PHY tristate "Aquantia PHYs" help diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile index b2728d00fc9a..b82651b57043 100644 --- a/drivers/net/phy/Makefile +++ b/drivers/net/phy/Makefile @@ -31,6 +31,7 @@ sfp-obj-$(CONFIG_SFP) += sfp-bus.o obj-y += $(sfp-obj-y) $(sfp-obj-m) obj-$(CONFIG_ADIN_PHY) += adin.o +obj-$(CONFIG_ADIN1100_PHY) += adin1100.o obj-$(CONFIG_AMD_PHY) += amd.o aquantia-objs += aquantia_main.o ifdef CONFIG_HWMON diff --git a/drivers/net/phy/adin1100.c b/drivers/net/phy/adin1100.c new file mode 100644 index 000000000000..23d1ae61e0ef --- /dev/null +++ b/drivers/net/phy/adin1100.c @@ -0,0 +1,247 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Driver for Analog Devices Industrial Ethernet T1L PHYs + * + * Copyright 2020 Analog Devices Inc. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define PHY_ID_ADIN1100 0x0283bc81 + +#define ADIN_FORCED_MODE 0x8000 +#define ADIN_FORCED_MODE_EN BIT(0) + +#define ADIN_CRSM_SFT_RST 0x8810 +#define ADIN_CRSM_SFT_RST_EN BIT(0) + +#define ADIN_CRSM_SFT_PD_CNTRL 0x8812 +#define ADIN_CRSM_SFT_PD_CNTRL_EN BIT(0) + +#define ADIN_AN_PHY_INST_STATUS 0x8030 +#define ADIN_IS_CFG_SLV BIT(2) +#define ADIN_IS_CFG_MST BIT(3) + +#define ADIN_CRSM_STAT 0x8818 +#define ADIN_CRSM_SFT_PD_RDY BIT(1) +#define ADIN_CRSM_SYS_RDY BIT(0) + +/** + * struct adin_priv - ADIN PHY driver private data + * @tx_level_2v4_able: set if the PHY supports 2.4V TX levels (10BASE-T1L) + * @tx_level_2v4: set if the PHY requests 2.4V TX levels (10BASE-T1L) + * @tx_level_prop_present: set if the TX level is specified in DT + */ +struct adin_priv { + unsigned int tx_level_2v4_able:1; + unsigned int tx_level_2v4:1; + unsigned int tx_level_prop_present:1; +}; + +static int adin_read_status(struct phy_device *phydev) +{ + int ret; + + ret = genphy_c45_read_status(phydev); + if (ret) + return ret; + + ret = phy_read_mmd(phydev, MDIO_MMD_AN, ADIN_AN_PHY_INST_STATUS); + if (ret < 0) + return ret; + + if (ret & ADIN_IS_CFG_SLV) + phydev->master_slave_state = MASTER_SLAVE_STATE_SLAVE; + + if (ret & ADIN_IS_CFG_MST) + phydev->master_slave_state = MASTER_SLAVE_STATE_MASTER; + + return 0; +} + +static int adin_config_aneg(struct phy_device *phydev) +{ + struct adin_priv *priv = phydev->priv; + int ret; + + if (phydev->autoneg == AUTONEG_DISABLE) { + ret = genphy_c45_pma_setup_forced(phydev); + if (ret < 0) + return ret; + + if (priv->tx_level_prop_present && priv->tx_level_2v4) { + ret = phy_set_bits_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_B10L_PMA_CTRL, + MDIO_PMA_10T1L_CTRL_2V4_EN); + if (ret < 0) + return ret; + } else { + ret = phy_clear_bits_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_B10L_PMA_CTRL, + MDIO_PMA_10T1L_CTRL_2V4_EN); + if (ret < 0) + return ret; + } + + /* Force PHY to use above configurations */ + return phy_set_bits_mmd(phydev, MDIO_MMD_AN, ADIN_FORCED_MODE, ADIN_FORCED_MODE_EN); + } + + ret = phy_clear_bits_mmd(phydev, MDIO_MMD_AN, ADIN_FORCED_MODE, ADIN_FORCED_MODE_EN); + if (ret < 0) + return ret; + + /* Request increased transmit level from LP. */ + if (priv->tx_level_prop_present && priv->tx_level_2v4) { + ret = phy_set_bits_mmd(phydev, MDIO_MMD_AN, MDIO_AN_T1_ADV_H, + MDIO_AN_T1_ADV_H_10L_TX_HI | + MDIO_AN_T1_ADV_H_10L_TX_HI_REQ); + if (ret < 0) + return ret; + } + + /* Disable 2.4 Vpp transmit level. */ + if ((priv->tx_level_prop_present && !priv->tx_level_2v4) || !priv->tx_level_2v4_able) { + ret = phy_clear_bits_mmd(phydev, MDIO_MMD_AN, MDIO_AN_T1_ADV_H, + MDIO_AN_T1_ADV_H_10L_TX_HI | + MDIO_AN_T1_ADV_H_10L_TX_HI_REQ); + if (ret < 0) + return ret; + } + + return genphy_c45_config_aneg(phydev); +} + +static int adin_set_powerdown_mode(struct phy_device *phydev, bool en) +{ + int ret; + int val; + + if (en) + val = ADIN_CRSM_SFT_PD_CNTRL_EN; + else + val = 0; + + ret = phy_write_mmd(phydev, MDIO_MMD_VEND1, + ADIN_CRSM_SFT_PD_CNTRL, val); + if (ret < 0) + return ret; + + return phy_read_mmd_poll_timeout(phydev, MDIO_MMD_VEND1, ADIN_CRSM_STAT, ret, + (ret & ADIN_CRSM_SFT_PD_RDY) == val, + 1000, 30000, true); +} + +static int adin_suspend(struct phy_device *phydev) +{ + return adin_set_powerdown_mode(phydev, true); +} + +static int adin_resume(struct phy_device *phydev) +{ + return adin_set_powerdown_mode(phydev, false); +} + +static int adin_set_loopback(struct phy_device *phydev, bool enable) +{ + if (enable) + return phy_set_bits_mmd(phydev, MDIO_MMD_PCS, MDIO_PCS_10T1L_CTRL, + BMCR_LOOPBACK); + + /* PCS loopback (according to 10BASE-T1L spec) */ + return phy_clear_bits_mmd(phydev, MDIO_MMD_PCS, MDIO_PCS_10T1L_CTRL, + BMCR_LOOPBACK); +} + +static int adin_soft_reset(struct phy_device *phydev) +{ + int ret; + + ret = phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, ADIN_CRSM_SFT_RST, ADIN_CRSM_SFT_RST_EN); + if (ret < 0) + return ret; + + return phy_read_mmd_poll_timeout(phydev, MDIO_MMD_VEND1, ADIN_CRSM_STAT, ret, + (ret & ADIN_CRSM_SYS_RDY), + 10000, 30000, true); +} + +static int adin_get_features(struct phy_device *phydev) +{ + struct adin_priv *priv = phydev->priv; + struct device *dev = &phydev->mdio.dev; + int ret; + u8 val; + + ret = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_10T1L_STAT); + if (ret < 0) + return ret; + + /* This depends on the voltage level from the power source */ + priv->tx_level_2v4_able = !!(ret & MDIO_PMA_10T1L_STAT_2V4_ABLE); + + phydev_dbg(phydev, "PHY supports 2.4V TX level: %s\n", + priv->tx_level_2v4_able ? "yes" : "no"); + + priv->tx_level_prop_present = device_property_present(dev, "phy-10base-t1l-2.4vpp"); + if (priv->tx_level_prop_present) { + ret = device_property_read_u8(dev, "phy-10base-t1l-2.4vpp", &val); + if (ret < 0) + return ret; + + priv->tx_level_2v4 = val; + if (!priv->tx_level_2v4 && priv->tx_level_2v4_able) + phydev_info(phydev, + "PHY supports 2.4V TX level, but disabled via config\n"); + } + + linkmode_set_bit_array(phy_basic_ports_array, ARRAY_SIZE(phy_basic_ports_array), + phydev->supported); + + return genphy_c45_pma_read_abilities(phydev); +} + +static int adin_probe(struct phy_device *phydev) +{ + struct device *dev = &phydev->mdio.dev; + struct adin_priv *priv; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + phydev->priv = priv; + + return 0; +} + +static struct phy_driver adin_driver[] = { + { + PHY_ID_MATCH_MODEL(PHY_ID_ADIN1100), + .name = "ADIN1100", + .get_features = adin_get_features, + .soft_reset = adin_soft_reset, + .probe = adin_probe, + .config_aneg = adin_config_aneg, + .read_status = adin_read_status, + .set_loopback = adin_set_loopback, + .suspend = adin_suspend, + .resume = adin_resume, + }, +}; + +module_phy_driver(adin_driver); + +static struct mdio_device_id __maybe_unused adin_tbl[] = { + { PHY_ID_MATCH_MODEL(PHY_ID_ADIN1100) }, + { } +}; + +MODULE_DEVICE_TABLE(mdio, adin_tbl); +MODULE_DESCRIPTION("Analog Devices Industrial Ethernet T1L PHY driver"); +MODULE_LICENSE("Dual BSD/GPL");