@@ -706,7 +706,6 @@ static int lan87xx_read_status(struct phy_device *phydev)
static int lan87xx_config_aneg(struct phy_device *phydev)
{
u16 ctl = 0;
- int rc;
switch (phydev->master_slave_set) {
case MASTER_SLAVE_CFG_MASTER_FORCE:
@@ -722,11 +721,7 @@ static int lan87xx_config_aneg(struct phy_device *phydev)
return -EOPNOTSUPP;
}
- rc = phy_modify_changed(phydev, MII_CTRL1000, CTL1000_AS_MASTER, ctl);
- if (rc == 1)
- rc = genphy_soft_reset(phydev);
-
- return rc;
+ return phy_modify_changed(phydev, MII_CTRL1000, CTL1000_AS_MASTER, ctl);
}
static struct phy_driver microchip_t1_phy_driver[] = {
When the T1 phy master/slave state is changed, at the end of config_aneg function genphy_softreset is called. After the reset all the registers configured during the config_init are restored to default value. To avoid this, removed the genphy_softreset call. Fixes: 8a1b415d70b7 ("net: phy: added ethtool master-slave configuration support") Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> --- drivers/net/phy/microchip_t1.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) base-commit: 2975dbdc3989cd66a4cb5a7c5510de2de8ee4d14