| Message ID | 20220407225023.3510609-5-andrew@lunn.ch (mailing list archive) |
|---|---|
| State | RFC |
| Delegated to: | Netdev Maintainers |
| Headers | show |
| Series | Use MMD/C45 helpers | expand |
On Fri, Apr 08, 2022 at 12:50:22AM +0200, Andrew Lunn wrote: > Stop using the helpers to construct a special phy address which > indicates C45. Instead use the C45 accessors, which will call the > busses C45 specific read/write API. > > Signed-off-by: Andrew Lunn <andrew@lunn.ch> > --- Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
diff --git a/drivers/net/dsa/sja1105/sja1105_main.c b/drivers/net/dsa/sja1105/sja1105_main.c index b33841c6507a..72b6fc1932b5 100644 --- a/drivers/net/dsa/sja1105/sja1105_main.c +++ b/drivers/net/dsa/sja1105/sja1105_main.c @@ -2252,14 +2252,13 @@ int sja1105_static_config_reload(struct sja1105_private *priv, * change it through the dynamic interface later. */ for (i = 0; i < ds->num_ports; i++) { - u32 reg_addr = mdiobus_c45_addr(MDIO_MMD_VEND2, MDIO_CTRL1); - speed_mbps[i] = sja1105_port_speed_to_ethtool(priv, mac[i].speed); mac[i].speed = priv->info->port_speed[SJA1105_SPEED_AUTO]; if (priv->xpcs[i]) - bmcr[i] = mdiobus_read(priv->mdio_pcs, i, reg_addr); + bmcr[i] = mdiobus_c45_read(priv->mdio_pcs, i, + MDIO_MMD_VEND2, MDIO_CTRL1); } /* No PTP operations can run right now */
Stop using the helpers to construct a special phy address which indicates C45. Instead use the C45 accessors, which will call the busses C45 specific read/write API. Signed-off-by: Andrew Lunn <andrew@lunn.ch> --- drivers/net/dsa/sja1105/sja1105_main.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)