diff mbox series

[v5,1/3] dt-bindings: net: add reset property for aspeed, ast2600-mdio binding

Message ID 20220413121037.23748-2-dylan_hung@aspeedtech.com (mailing list archive)
State Superseded
Delegated to: Netdev Maintainers
Headers show
Series Add reset deassertion for Aspeed MDIO | expand

Checks

Context Check Description
netdev/tree_selection success Guessing tree name failed - patch did not apply

Commit Message

Dylan Hung April 13, 2022, 12:10 p.m. UTC 
The AST2600 MDIO bus controller has a reset control bit and must be
deasserted before manipulating the MDIO controller. By default, the
hardware asserts the reset so the driver only need to deassert it.

Regarding to the old DT blobs which don't have reset property in them,
the reset deassertion is usually done by the bootloader so the reset
property is optional to work with them.

Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 .../devicetree/bindings/net/aspeed,ast2600-mdio.yaml        | 6 ++++++
 1 file changed, 6 insertions(+)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/net/aspeed,ast2600-mdio.yaml b/Documentation/devicetree/bindings/net/aspeed,ast2600-mdio.yaml
index 1c88820cbcdf..f81eda8cb0a5 100644
--- a/Documentation/devicetree/bindings/net/aspeed,ast2600-mdio.yaml
+++ b/Documentation/devicetree/bindings/net/aspeed,ast2600-mdio.yaml
@@ -20,10 +20,14 @@  allOf:
 properties:
   compatible:
     const: aspeed,ast2600-mdio
+
   reg:
     maxItems: 1
     description: The register range of the MDIO controller instance
 
+  resets:
+    maxItems: 1
+
 required:
   - compatible
   - reg
@@ -34,11 +38,13 @@  unevaluatedProperties: false
 
 examples:
   - |
+    #include <dt-bindings/clock/ast2600-clock.h>
     mdio0: mdio@1e650000 {
             compatible = "aspeed,ast2600-mdio";
             reg = <0x1e650000 0x8>;
             #address-cells = <1>;
             #size-cells = <0>;
+            resets = <&syscon ASPEED_RESET_MII>;
 
             ethphy0: ethernet-phy@0 {
                     compatible = "ethernet-phy-ieee802.3-c22";