From patchwork Fri Apr 29 15:34:35 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Alexandru Tachici X-Patchwork-Id: 12832356 X-Patchwork-Delegate: kuba@kernel.org Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id D2E35C433F5 for ; Fri, 29 Apr 2022 15:27:13 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1378392AbiD2Pa2 (ORCPT ); Fri, 29 Apr 2022 11:30:28 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:39858 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1378390AbiD2Pa2 (ORCPT ); Fri, 29 Apr 2022 11:30:28 -0400 Received: from mx0a-00128a01.pphosted.com (mx0a-00128a01.pphosted.com [148.163.135.77]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 83083D4457; Fri, 29 Apr 2022 08:27:09 -0700 (PDT) Received: from pps.filterd (m0167088.ppops.net [127.0.0.1]) by mx0a-00128a01.pphosted.com (8.17.1.5/8.17.1.5) with ESMTP id 23TFMMoJ014883; Fri, 29 Apr 2022 11:26:58 -0400 Received: from nwd2mta4.analog.com ([137.71.173.58]) by mx0a-00128a01.pphosted.com (PPS) with ESMTPS id 3fprsdk7wb-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Fri, 29 Apr 2022 11:26:57 -0400 Received: from ASHBMBX8.ad.analog.com (ASHBMBX8.ad.analog.com [10.64.17.5]) by nwd2mta4.analog.com (8.14.7/8.14.7) with ESMTP id 23TFQurx044427 (version=TLSv1/SSLv3 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=FAIL); Fri, 29 Apr 2022 11:26:56 -0400 Received: from ASHBCASHYB5.ad.analog.com (10.64.17.133) by ASHBMBX8.ad.analog.com (10.64.17.5) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.14; Fri, 29 Apr 2022 11:26:55 -0400 Received: from ASHBMBX8.ad.analog.com (10.64.17.5) by ASHBCASHYB5.ad.analog.com (10.64.17.133) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.14; Fri, 29 Apr 2022 11:26:55 -0400 Received: from zeus.spd.analog.com (10.66.68.11) by ashbmbx8.ad.analog.com (10.64.17.5) with Microsoft SMTP Server id 15.2.986.14 via Frontend Transport; Fri, 29 Apr 2022 11:26:55 -0400 Received: from localhost.localdomain ([10.48.65.12]) by zeus.spd.analog.com (8.15.1/8.15.1) with ESMTP id 23TFQEcj028122; Fri, 29 Apr 2022 11:26:46 -0400 From: To: CC: , , , , , , , , , , Alexandru Ardelean Subject: [PATCH v7 5/7] net: phy: adin1100: Add initial support for ADIN1100 industrial PHY Date: Fri, 29 Apr 2022 18:34:35 +0300 Message-ID: <20220429153437.80087-6-alexandru.tachici@analog.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20220429153437.80087-1-alexandru.tachici@analog.com> References: <20220429153437.80087-1-alexandru.tachici@analog.com> MIME-Version: 1.0 X-ADIRuleOP-NewSCL: Rule Triggered X-Proofpoint-GUID: L3zwUzxrlaW3_e8x8uJwquS_wm1VR1vm X-Proofpoint-ORIG-GUID: L3zwUzxrlaW3_e8x8uJwquS_wm1VR1vm X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.205,Aquarius:18.0.858,Hydra:6.0.486,FMLib:17.11.64.514 definitions=2022-04-29_07,2022-04-28_01,2022-02-23_01 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 clxscore=1015 mlxlogscore=898 mlxscore=0 lowpriorityscore=0 malwarescore=0 phishscore=0 adultscore=0 priorityscore=1501 impostorscore=0 suspectscore=0 bulkscore=0 spamscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.12.0-2202240000 definitions=main-2204290083 Precedence: bulk List-ID: X-Mailing-List: netdev@vger.kernel.org X-Patchwork-Delegate: kuba@kernel.org From: Alexandru Ardelean The ADIN1100 is a low power single port 10BASE-T1L transceiver designed for industrial Ethernet applications and is compliant with the IEEE 802.3cg Ethernet standard for long reach 10 Mb/s Single Pair Ethernet. Signed-off-by: Alexandru Ardelean Signed-off-by: Alexandru Tachici --- drivers/net/phy/Kconfig | 7 ++ drivers/net/phy/Makefile | 1 + drivers/net/phy/adin1100.c | 240 +++++++++++++++++++++++++++++++++++++ 3 files changed, 248 insertions(+) create mode 100644 drivers/net/phy/adin1100.c diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index ea7571a2b39b..bbbf6c07ea53 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -83,6 +83,13 @@ config ADIN_PHY - ADIN1300 - Robust,Industrial, Low Latency 10/100/1000 Gigabit Ethernet PHY +config ADIN1100_PHY + tristate "Analog Devices Industrial Ethernet T1L PHYs" + help + Adds support for the Analog Devices Industrial T1L Ethernet PHYs. + Currently supports the: + - ADIN1100 - Robust,Industrial, Low Power 10BASE-T1L Ethernet PHY + config AQUANTIA_PHY tristate "Aquantia PHYs" help diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile index b2728d00fc9a..b82651b57043 100644 --- a/drivers/net/phy/Makefile +++ b/drivers/net/phy/Makefile @@ -31,6 +31,7 @@ sfp-obj-$(CONFIG_SFP) += sfp-bus.o obj-y += $(sfp-obj-y) $(sfp-obj-m) obj-$(CONFIG_ADIN_PHY) += adin.o +obj-$(CONFIG_ADIN1100_PHY) += adin1100.o obj-$(CONFIG_AMD_PHY) += amd.o aquantia-objs += aquantia_main.o ifdef CONFIG_HWMON diff --git a/drivers/net/phy/adin1100.c b/drivers/net/phy/adin1100.c new file mode 100644 index 000000000000..f20bbef37239 --- /dev/null +++ b/drivers/net/phy/adin1100.c @@ -0,0 +1,240 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Driver for Analog Devices Industrial Ethernet T1L PHYs + * + * Copyright 2020 Analog Devices Inc. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define PHY_ID_ADIN1100 0x0283bc81 + +#define ADIN_FORCED_MODE 0x8000 +#define ADIN_FORCED_MODE_EN BIT(0) + +#define ADIN_CRSM_SFT_RST 0x8810 +#define ADIN_CRSM_SFT_RST_EN BIT(0) + +#define ADIN_CRSM_SFT_PD_CNTRL 0x8812 +#define ADIN_CRSM_SFT_PD_CNTRL_EN BIT(0) + +#define ADIN_AN_PHY_INST_STATUS 0x8030 +#define ADIN_IS_CFG_SLV BIT(2) +#define ADIN_IS_CFG_MST BIT(3) + +#define ADIN_CRSM_STAT 0x8818 +#define ADIN_CRSM_SFT_PD_RDY BIT(1) +#define ADIN_CRSM_SYS_RDY BIT(0) + +/** + * struct adin_priv - ADIN PHY driver private data + * @tx_level_2v4_able: set if the PHY supports 2.4V TX levels (10BASE-T1L) + * @tx_level_2v4: set if the PHY requests 2.4V TX levels (10BASE-T1L) + * @tx_level_prop_present: set if the TX level is specified in DT + */ +struct adin_priv { + unsigned int tx_level_2v4_able:1; + unsigned int tx_level_2v4:1; + unsigned int tx_level_prop_present:1; +}; + +static int adin_read_status(struct phy_device *phydev) +{ + int ret; + + ret = genphy_c45_read_status(phydev); + if (ret) + return ret; + + ret = phy_read_mmd(phydev, MDIO_MMD_AN, ADIN_AN_PHY_INST_STATUS); + if (ret < 0) + return ret; + + if (ret & ADIN_IS_CFG_SLV) + phydev->master_slave_state = MASTER_SLAVE_STATE_SLAVE; + + if (ret & ADIN_IS_CFG_MST) + phydev->master_slave_state = MASTER_SLAVE_STATE_MASTER; + + return 0; +} + +static int adin_config_aneg(struct phy_device *phydev) +{ + struct adin_priv *priv = phydev->priv; + int ret; + + if (phydev->autoneg == AUTONEG_DISABLE) { + ret = genphy_c45_pma_setup_forced(phydev); + if (ret < 0) + return ret; + + if (priv->tx_level_prop_present && priv->tx_level_2v4) + ret = phy_set_bits_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_B10L_PMA_CTRL, + MDIO_PMA_10T1L_CTRL_2V4_EN); + else + ret = phy_clear_bits_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_B10L_PMA_CTRL, + MDIO_PMA_10T1L_CTRL_2V4_EN); + if (ret < 0) + return ret; + + /* Force PHY to use above configurations */ + return phy_set_bits_mmd(phydev, MDIO_MMD_AN, ADIN_FORCED_MODE, ADIN_FORCED_MODE_EN); + } + + ret = phy_clear_bits_mmd(phydev, MDIO_MMD_AN, ADIN_FORCED_MODE, ADIN_FORCED_MODE_EN); + if (ret < 0) + return ret; + + /* Request increased transmit level from LP. */ + if (priv->tx_level_prop_present && priv->tx_level_2v4) { + ret = phy_set_bits_mmd(phydev, MDIO_MMD_AN, MDIO_AN_T1_ADV_H, + MDIO_AN_T1_ADV_H_10L_TX_HI | + MDIO_AN_T1_ADV_H_10L_TX_HI_REQ); + if (ret < 0) + return ret; + } + + /* Disable 2.4 Vpp transmit level. */ + if ((priv->tx_level_prop_present && !priv->tx_level_2v4) || !priv->tx_level_2v4_able) { + ret = phy_clear_bits_mmd(phydev, MDIO_MMD_AN, MDIO_AN_T1_ADV_H, + MDIO_AN_T1_ADV_H_10L_TX_HI | + MDIO_AN_T1_ADV_H_10L_TX_HI_REQ); + if (ret < 0) + return ret; + } + + return genphy_c45_config_aneg(phydev); +} + +static int adin_set_powerdown_mode(struct phy_device *phydev, bool en) +{ + int ret; + int val; + + val = en ? ADIN_CRSM_SFT_PD_CNTRL_EN : 0; + ret = phy_write_mmd(phydev, MDIO_MMD_VEND1, + ADIN_CRSM_SFT_PD_CNTRL, val); + if (ret < 0) + return ret; + + return phy_read_mmd_poll_timeout(phydev, MDIO_MMD_VEND1, ADIN_CRSM_STAT, ret, + (ret & ADIN_CRSM_SFT_PD_RDY) == val, + 1000, 30000, true); +} + +static int adin_suspend(struct phy_device *phydev) +{ + return adin_set_powerdown_mode(phydev, true); +} + +static int adin_resume(struct phy_device *phydev) +{ + return adin_set_powerdown_mode(phydev, false); +} + +static int adin_set_loopback(struct phy_device *phydev, bool enable) +{ + if (enable) + return phy_set_bits_mmd(phydev, MDIO_MMD_PCS, MDIO_PCS_10T1L_CTRL, + BMCR_LOOPBACK); + + /* PCS loopback (according to 10BASE-T1L spec) */ + return phy_clear_bits_mmd(phydev, MDIO_MMD_PCS, MDIO_PCS_10T1L_CTRL, + BMCR_LOOPBACK); +} + +static int adin_soft_reset(struct phy_device *phydev) +{ + int ret; + + ret = phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, ADIN_CRSM_SFT_RST, ADIN_CRSM_SFT_RST_EN); + if (ret < 0) + return ret; + + return phy_read_mmd_poll_timeout(phydev, MDIO_MMD_VEND1, ADIN_CRSM_STAT, ret, + (ret & ADIN_CRSM_SYS_RDY), + 10000, 30000, true); +} + +static int adin_get_features(struct phy_device *phydev) +{ + struct adin_priv *priv = phydev->priv; + struct device *dev = &phydev->mdio.dev; + int ret; + u8 val; + + ret = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_10T1L_STAT); + if (ret < 0) + return ret; + + /* This depends on the voltage level from the power source */ + priv->tx_level_2v4_able = !!(ret & MDIO_PMA_10T1L_STAT_2V4_ABLE); + + phydev_dbg(phydev, "PHY supports 2.4V TX level: %s\n", + priv->tx_level_2v4_able ? "yes" : "no"); + + priv->tx_level_prop_present = device_property_present(dev, "phy-10base-t1l-2.4vpp"); + if (priv->tx_level_prop_present) { + ret = device_property_read_u8(dev, "phy-10base-t1l-2.4vpp", &val); + if (ret < 0) + return ret; + + priv->tx_level_2v4 = val; + if (!priv->tx_level_2v4 && priv->tx_level_2v4_able) + phydev_info(phydev, + "PHY supports 2.4V TX level, but disabled via config\n"); + } + + linkmode_set_bit_array(phy_basic_ports_array, ARRAY_SIZE(phy_basic_ports_array), + phydev->supported); + + return genphy_c45_pma_read_abilities(phydev); +} + +static int adin_probe(struct phy_device *phydev) +{ + struct device *dev = &phydev->mdio.dev; + struct adin_priv *priv; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + phydev->priv = priv; + + return 0; +} + +static struct phy_driver adin_driver[] = { + { + PHY_ID_MATCH_MODEL(PHY_ID_ADIN1100), + .name = "ADIN1100", + .get_features = adin_get_features, + .soft_reset = adin_soft_reset, + .probe = adin_probe, + .config_aneg = adin_config_aneg, + .read_status = adin_read_status, + .set_loopback = adin_set_loopback, + .suspend = adin_suspend, + .resume = adin_resume, + }, +}; + +module_phy_driver(adin_driver); + +static struct mdio_device_id __maybe_unused adin_tbl[] = { + { PHY_ID_MATCH_MODEL(PHY_ID_ADIN1100) }, + { } +}; + +MODULE_DEVICE_TABLE(mdio, adin_tbl); +MODULE_DESCRIPTION("Analog Devices Industrial Ethernet T1L PHY driver"); +MODULE_LICENSE("Dual BSD/GPL");