Message ID | 20220506094250.3630615-1-yangyingliang@huawei.com (mailing list archive) |
---|---|
State | Accepted |
Commit | 51ca86b4c9c7c75f5630fa0dbe5f8f0bd98e3c3e |
Delegated to: | Netdev Maintainers |
Headers | show |
Series | ethernet: tulip: fix missing pci_disable_device() on error in tulip_init_one() | expand |
Am Freitag, 6. Mai 2022, 11:42:50 CEST schrieb Yang Yingliang: > Fix the missing pci_disable_device() before return > from tulip_init_one() in the error handling case. I would suggest removing the pci_disable_device() from tulip_remove_one() instead and using pcim_enable_device(), i.e. devres, and let the driver core handle all these things. Of course more of the used functions could be converted them, e.g. using devm_alloc_etherdev() and so on. Eike
On Fri, 06 May 2022 12:11:56 +0200 Rolf Eike Beer wrote: > Am Freitag, 6. Mai 2022, 11:42:50 CEST schrieb Yang Yingliang: > > Fix the missing pci_disable_device() before return > > from tulip_init_one() in the error handling case. > > I would suggest removing the pci_disable_device() from tulip_remove_one() > instead and using pcim_enable_device(), i.e. devres, and let the driver core > handle all these things. Of course more of the used functions could be > converted them, e.g. using devm_alloc_etherdev() and so on. Let's not rewrite the error handling in this dinosaur of a driver any more than absolutely necessary, please.
Hello: This patch was applied to netdev/net.git (master) by Jakub Kicinski <kuba@kernel.org>: On Fri, 6 May 2022 17:42:50 +0800 you wrote: > Fix the missing pci_disable_device() before return > from tulip_init_one() in the error handling case. > > Reported-by: Hulk Robot <hulkci@huawei.com> > Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> > --- > drivers/net/ethernet/dec/tulip/tulip_core.c | 5 ++++- > 1 file changed, 4 insertions(+), 1 deletion(-) Here is the summary with links: - ethernet: tulip: fix missing pci_disable_device() on error in tulip_init_one() https://git.kernel.org/netdev/net/c/51ca86b4c9c7 You are awesome, thank you!
Am Freitag, 6. Mai 2022, 18:21:52 CEST schrieb Jakub Kicinski: > On Fri, 06 May 2022 12:11:56 +0200 Rolf Eike Beer wrote: > > Am Freitag, 6. Mai 2022, 11:42:50 CEST schrieb Yang Yingliang: > > > Fix the missing pci_disable_device() before return > > > from tulip_init_one() in the error handling case. > > > > I would suggest removing the pci_disable_device() from tulip_remove_one() > > instead and using pcim_enable_device(), i.e. devres, and let the driver > > core handle all these things. Of course more of the used functions could > > be converted them, e.g. using devm_alloc_etherdev() and so on. > > Let's not rewrite the error handling in this dinosaur of a driver > any more than absolutely necessary, please. Challenge accepted ;) [ 274.452394] tulip0: no phy info, aborting mtable build [ 274.499041] tulip0: MII transceiver #1 config 1000 status 782d advertising 01e1 [ 274.750691] net eth0: Digital DS21142/43 Tulip rev 65 at MMIO 0xf4008000, 00:30:6e:08:7d:21, IRQ 17 [ 283.104520] net eth0: Setting full-duplex based on MII#1 link partner capability of c1e1 Works fine, patch in a minute.
diff --git a/drivers/net/ethernet/dec/tulip/tulip_core.c b/drivers/net/ethernet/dec/tulip/tulip_core.c index 79df5a72877b..0040dcaab945 100644 --- a/drivers/net/ethernet/dec/tulip/tulip_core.c +++ b/drivers/net/ethernet/dec/tulip/tulip_core.c @@ -1399,8 +1399,10 @@ static int tulip_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) /* alloc_etherdev ensures aligned and zeroed private structures */ dev = alloc_etherdev (sizeof (*tp)); - if (!dev) + if (!dev) { + pci_disable_device(pdev); return -ENOMEM; + } SET_NETDEV_DEV(dev, &pdev->dev); if (pci_resource_len (pdev, 0) < tulip_tbl[chip_idx].io_size) { @@ -1785,6 +1787,7 @@ static int tulip_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) err_out_free_netdev: free_netdev (dev); + pci_disable_device(pdev); return -ENODEV; }
Fix the missing pci_disable_device() before return from tulip_init_one() in the error handling case. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- drivers/net/ethernet/dec/tulip/tulip_core.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)