diff mbox series

[v5,3/3] ARM: dts: imx6qdl-sr-som: update phy configuration for som revision 1.9

Message ID 20220517085431.3895-3-josua@solid-run.com (mailing list archive)
State Accepted
Commit 654cd22227e6394f17b2f7c10d9fa9130db193fe
Delegated to: Netdev Maintainers
Headers show
Series adin: add support for clock output | expand

Checks

Context Check Description
netdev/fixes_present success Fixes tag not required for -next series
netdev/subject_prefix success Link
netdev/cover_letter success Series has a cover letter
netdev/patch_count success Link
netdev/header_inline success No static functions without inline keyword in header files
netdev/build_32bit success Errors and warnings before: 0 this patch: 0
netdev/cc_maintainers warning 2 maintainers not CCed: linux-arm-kernel@lists.infradead.org devicetree@vger.kernel.org
netdev/build_clang success Errors and warnings before: 0 this patch: 0
netdev/module_param success Was 0 now: 0
netdev/verify_signedoff success Signed-off-by tag matches author and committer
netdev/verify_fixes success No Fixes tag
netdev/build_allmodconfig_warn success Errors and warnings before: 0 this patch: 0
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 16 lines checked
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/source_inline success Was 0 now: 0
netdev/tree_selection success Guessing tree name failed - patch did not apply

Commit Message

Josua Mayer May 17, 2022, 8:54 a.m. UTC 
Since SoM revision 1.9 the PHY has been replaced with an ADIN1300,
add an entry for it next to the original.

As Russell King pointed out, additional phy nodes cause warnings like:
mdio_bus 2188000.ethernet-1: MDIO device at address 1 is missing
To avoid this the new node has its status set to disabled. U-Boot will
be modified to enable the appropriate phy node after probing.

The existing ar8035 nodes have to stay enabled by default to avoid
breaking existing systems when they update Linux only.

Co-developed-by: Alvaro Karsz <alvaro.karsz@solid-run.com>
Signed-off-by: Alvaro Karsz <alvaro.karsz@solid-run.com>
Signed-off-by: Josua Mayer <josua@solid-run.com>
---
V2 -> V3: new phy node status set disabled
V1 -> V2: changed dts property name

 arch/arm/boot/dts/imx6qdl-sr-som.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/imx6qdl-sr-som.dtsi b/arch/arm/boot/dts/imx6qdl-sr-som.dtsi
index f86efd0ccc40..ce543e325cd3 100644
--- a/arch/arm/boot/dts/imx6qdl-sr-som.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sr-som.dtsi
@@ -83,6 +83,16 @@  ethernet-phy@4 {
 			qca,clk-out-frequency = <125000000>;
 			qca,smarteee-tw-us-1g = <24>;
 		};
+
+		/*
+		 * ADIN1300 (som rev 1.9 or later) is always at address 1. It
+		 * will be enabled automatically by U-Boot if detected.
+		 */
+		ethernet-phy@1 {
+			reg = <1>;
+			adi,phy-output-clock = "125mhz-free-running";
+			status = "disabled";
+		};
 	};
 };