Message ID | 20220706192455.56001-1-f.fainelli@gmail.com (mailing list archive) |
---|---|
State | Superseded |
Delegated to: | Netdev Maintainers |
Headers | show |
Series | [stable,4.9,v2] net: dsa: bcm_sf2: force pause link settings | expand |
Context | Check | Description |
---|---|---|
netdev/tree_selection | success | Guessing tree name failed - patch did not apply |
Hi Florian, On Wed, Jul 06, 2022 at 12:24:54PM -0700, Florian Fainelli wrote: > From: Doug Berger <opendmb@gmail.com> > > commit 7c97bc0128b2eecc703106112679a69d446d1a12 upstream > > The pause settings reported by the PHY should also be applied to the > GMII port status override otherwise the switch will not generate pause > frames towards the link partner despite the advertisement saying > otherwise. > > Fixes: 246d7f773c13 ("net: dsa: add Broadcom SF2 switch driver") > Signed-off-by: Doug Berger <opendmb@gmail.com> > Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> > Link: https://lore.kernel.org/r/20220623030204.1966851-1-f.fainelli@gmail.com > Signed-off-by: Jakub Kicinski <kuba@kernel.org> > --- > Changes in v2: > > - use both local and remote advertisement to determine when to apply > flow control settings > > drivers/net/dsa/bcm_sf2.c | 16 ++++++++++++++++ > 1 file changed, 16 insertions(+) > > diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c > index 40b3adf7ad99..562b5eb23d90 100644 > --- a/drivers/net/dsa/bcm_sf2.c > +++ b/drivers/net/dsa/bcm_sf2.c > @@ -600,7 +600,9 @@ static void bcm_sf2_sw_adjust_link(struct dsa_switch *ds, int port, > struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds); > struct ethtool_eee *p = &priv->port_sts[port].eee; > u32 id_mode_dis = 0, port_mode; > + u16 lcl_adv = 0, rmt_adv = 0; > const char *str = NULL; > + u8 flowctrl = 0; > u32 reg; > > switch (phydev->interface) { > @@ -667,10 +669,24 @@ static void bcm_sf2_sw_adjust_link(struct dsa_switch *ds, int port, > break; > } > > + if (phydev->pause) > + rmt_adv = LPA_PAUSE_CAP; > + if (phydev->asym_pause) > + rmt_adv |= LPA_PAUSE_ASYM; > + if (phydev->advertising & ADVERTISED_Pause) > + lcl_adv = ADVERTISE_PAUSE_CAP; > + if (phydev->advertising & ADVERTISED_Asym_Pause) > + lcl_adv |= ADVERTISE_PAUSE_ASYM; > + flowctrl = mii_resolve_flowctrl_fdx(lcl_adv, rmt_adv); IEEE 802.3 says "The PAUSE function shall be enabled according to Table 28B–3 only if the highest common denominator is a full duplex technology." > + > if (phydev->link) > reg |= LINK_STS; > if (phydev->duplex == DUPLEX_FULL) > reg |= DUPLX_MODE; > + if (flowctrl & FLOW_CTRL_TX) > + reg |= TXFLOW_CNTL; > + if (flowctrl & FLOW_CTRL_RX) > + reg |= RXFLOW_CNTL; > > core_writel(priv, reg, CORE_STS_OVERRIDE_GMIIP_PORT(port)); > > -- > 2.25.1 >
On 7/6/22 13:31, Vladimir Oltean wrote: > Hi Florian, > > On Wed, Jul 06, 2022 at 12:24:54PM -0700, Florian Fainelli wrote: >> From: Doug Berger <opendmb@gmail.com> >> >> commit 7c97bc0128b2eecc703106112679a69d446d1a12 upstream >> >> The pause settings reported by the PHY should also be applied to the >> GMII port status override otherwise the switch will not generate pause >> frames towards the link partner despite the advertisement saying >> otherwise. >> >> Fixes: 246d7f773c13 ("net: dsa: add Broadcom SF2 switch driver") >> Signed-off-by: Doug Berger <opendmb@gmail.com> >> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> >> Link: https://lore.kernel.org/r/20220623030204.1966851-1-f.fainelli@gmail.com >> Signed-off-by: Jakub Kicinski <kuba@kernel.org> >> --- >> Changes in v2: >> >> - use both local and remote advertisement to determine when to apply >> flow control settings >> >> drivers/net/dsa/bcm_sf2.c | 16 ++++++++++++++++ >> 1 file changed, 16 insertions(+) >> >> diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c >> index 40b3adf7ad99..562b5eb23d90 100644 >> --- a/drivers/net/dsa/bcm_sf2.c >> +++ b/drivers/net/dsa/bcm_sf2.c >> @@ -600,7 +600,9 @@ static void bcm_sf2_sw_adjust_link(struct dsa_switch *ds, int port, >> struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds); >> struct ethtool_eee *p = &priv->port_sts[port].eee; >> u32 id_mode_dis = 0, port_mode; >> + u16 lcl_adv = 0, rmt_adv = 0; >> const char *str = NULL; >> + u8 flowctrl = 0; >> u32 reg; >> >> switch (phydev->interface) { >> @@ -667,10 +669,24 @@ static void bcm_sf2_sw_adjust_link(struct dsa_switch *ds, int port, >> break; >> } >> >> + if (phydev->pause) >> + rmt_adv = LPA_PAUSE_CAP; >> + if (phydev->asym_pause) >> + rmt_adv |= LPA_PAUSE_ASYM; >> + if (phydev->advertising & ADVERTISED_Pause) >> + lcl_adv = ADVERTISE_PAUSE_CAP; >> + if (phydev->advertising & ADVERTISED_Asym_Pause) >> + lcl_adv |= ADVERTISE_PAUSE_ASYM; >> + flowctrl = mii_resolve_flowctrl_fdx(lcl_adv, rmt_adv); > > IEEE 802.3 says "The PAUSE function shall be enabled according to Table > 28B–3 only if the highest common denominator is a full duplex technology." Indeed, sorry about that, so I suppose the incremental patch would do, since we do not support changing pause frame auto-negotiation settings in 4.9: diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c index 562b5eb23d90..f3d61f2bb0f7 100644 --- a/drivers/net/dsa/bcm_sf2.c +++ b/drivers/net/dsa/bcm_sf2.c @@ -669,15 +669,18 @@ static void bcm_sf2_sw_adjust_link(struct dsa_switch *ds, int port, break; } - if (phydev->pause) - rmt_adv = LPA_PAUSE_CAP; - if (phydev->asym_pause) - rmt_adv |= LPA_PAUSE_ASYM; - if (phydev->advertising & ADVERTISED_Pause) - lcl_adv = ADVERTISE_PAUSE_CAP; - if (phydev->advertising & ADVERTISED_Asym_Pause) - lcl_adv |= ADVERTISE_PAUSE_ASYM; - flowctrl = mii_resolve_flowctrl_fdx(lcl_adv, rmt_adv); + if (phydev->duplex == DUPLEX_FULL && + phydev->autoneg == AUTONEG_ENABLE) { + if (phydev->pause) + rmt_adv = LPA_PAUSE_CAP; + if (phydev->asym_pause) + rmt_adv |= LPA_PAUSE_ASYM; + if (phydev->advertising & ADVERTISED_Pause) + lcl_adv = ADVERTISE_PAUSE_CAP; + if (phydev->advertising & ADVERTISED_Asym_Pause) + lcl_adv |= ADVERTISE_PAUSE_ASYM; + flowctrl = mii_resolve_flowctrl_fdx(lcl_adv, rmt_adv); + } if (phydev->link) reg |= LINK_STS;
On Thu, Jul 07, 2022 at 09:53:04AM -0700, Florian Fainelli wrote: > > IEEE 802.3 says "The PAUSE function shall be enabled according to Table > > 28B–3 only if the highest common denominator is a full duplex technology." > > Indeed, sorry about that, so I suppose the incremental patch would do, since > we do not support changing pause frame auto-negotiation settings in 4.9: > > diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c > index 562b5eb23d90..f3d61f2bb0f7 100644 > --- a/drivers/net/dsa/bcm_sf2.c > +++ b/drivers/net/dsa/bcm_sf2.c > @@ -669,15 +669,18 @@ static void bcm_sf2_sw_adjust_link(struct dsa_switch > *ds, int port, > break; > } > > - if (phydev->pause) > - rmt_adv = LPA_PAUSE_CAP; > - if (phydev->asym_pause) > - rmt_adv |= LPA_PAUSE_ASYM; > - if (phydev->advertising & ADVERTISED_Pause) > - lcl_adv = ADVERTISE_PAUSE_CAP; > - if (phydev->advertising & ADVERTISED_Asym_Pause) > - lcl_adv |= ADVERTISE_PAUSE_ASYM; > - flowctrl = mii_resolve_flowctrl_fdx(lcl_adv, rmt_adv); > + if (phydev->duplex == DUPLEX_FULL && > + phydev->autoneg == AUTONEG_ENABLE) { > + if (phydev->pause) > + rmt_adv = LPA_PAUSE_CAP; > + if (phydev->asym_pause) > + rmt_adv |= LPA_PAUSE_ASYM; > + if (phydev->advertising & ADVERTISED_Pause) > + lcl_adv = ADVERTISE_PAUSE_CAP; > + if (phydev->advertising & ADVERTISED_Asym_Pause) > + lcl_adv |= ADVERTISE_PAUSE_ASYM; > + flowctrl = mii_resolve_flowctrl_fdx(lcl_adv, rmt_adv); > + } > > if (phydev->link) > reg |= LINK_STS; Yes, this looks OK, thank you.
diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c index 40b3adf7ad99..562b5eb23d90 100644 --- a/drivers/net/dsa/bcm_sf2.c +++ b/drivers/net/dsa/bcm_sf2.c @@ -600,7 +600,9 @@ static void bcm_sf2_sw_adjust_link(struct dsa_switch *ds, int port, struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds); struct ethtool_eee *p = &priv->port_sts[port].eee; u32 id_mode_dis = 0, port_mode; + u16 lcl_adv = 0, rmt_adv = 0; const char *str = NULL; + u8 flowctrl = 0; u32 reg; switch (phydev->interface) { @@ -667,10 +669,24 @@ static void bcm_sf2_sw_adjust_link(struct dsa_switch *ds, int port, break; } + if (phydev->pause) + rmt_adv = LPA_PAUSE_CAP; + if (phydev->asym_pause) + rmt_adv |= LPA_PAUSE_ASYM; + if (phydev->advertising & ADVERTISED_Pause) + lcl_adv = ADVERTISE_PAUSE_CAP; + if (phydev->advertising & ADVERTISED_Asym_Pause) + lcl_adv |= ADVERTISE_PAUSE_ASYM; + flowctrl = mii_resolve_flowctrl_fdx(lcl_adv, rmt_adv); + if (phydev->link) reg |= LINK_STS; if (phydev->duplex == DUPLEX_FULL) reg |= DUPLX_MODE; + if (flowctrl & FLOW_CTRL_TX) + reg |= TXFLOW_CNTL; + if (flowctrl & FLOW_CTRL_RX) + reg |= RXFLOW_CNTL; core_writel(priv, reg, CORE_STS_OVERRIDE_GMIIP_PORT(port));