@@ -38,4 +38,5 @@ ioam6_parser
toeplitz
tun
cmsg_sender
-unix_connect
\ No newline at end of file
+unix_connect
+bind_bhash
@@ -40,6 +40,7 @@ TEST_PROGS += arp_ndisc_evict_nocarrier.sh
TEST_PROGS += ndisc_unsolicited_na_test.sh
TEST_PROGS += arp_ndisc_untracked_subnets.sh
TEST_PROGS += stress_reuseport_listen.sh
+TEST_PROGS += bind_bhash.sh
TEST_PROGS_EXTENDED := in_netns.sh setup_loopback.sh setup_veth.sh
TEST_PROGS_EXTENDED += toeplitz_client.sh toeplitz.sh
TEST_GEN_FILES = socket nettest
@@ -60,6 +61,7 @@ TEST_GEN_FILES += toeplitz
TEST_GEN_FILES += cmsg_sender
TEST_GEN_FILES += stress_reuseport_listen
TEST_PROGS += test_vxlan_vnifiltering.sh
+TEST_GEN_FILES += bind_bhash
TEST_FILES := settings
@@ -71,3 +73,4 @@ include bpf/Makefile
$(OUTPUT)/reuseport_bpf_numa: LDLIBS += -lnuma
$(OUTPUT)/tcp_mmap: LDLIBS += -lpthread
$(OUTPUT)/tcp_inq: LDLIBS += -lpthread
+$(OUTPUT)/bind_bhash: LDLIBS += -lpthread
new file mode 100644
@@ -0,0 +1,144 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * This times how long it takes to bind to a port when the port already
+ * has multiple sockets in its bhash table.
+ *
+ * In the setup(), we populate the port's bhash table with
+ * MAX_THREADS * MAX_CONNECTIONS number of entries.
+ */
+
+#include <unistd.h>
+#include <stdio.h>
+#include <netdb.h>
+#include <pthread.h>
+#include <string.h>
+#include <stdbool.h>
+
+#define MAX_THREADS 600
+#define MAX_CONNECTIONS 40
+
+static const char *setup_addr_v6 = "::1";
+static const char *setup_addr_v4 = "127.0.0.1";
+static const char *setup_addr;
+static const char *bind_addr;
+static const char *port;
+bool use_v6;
+int ret;
+
+static int fd_array[MAX_THREADS][MAX_CONNECTIONS];
+
+static int bind_socket(int opt, const char *addr)
+{
+ struct addrinfo *res, hint = {};
+ int sock_fd, reuse = 1, err;
+ int domain = use_v6 ? AF_INET6 : AF_INET;
+
+ sock_fd = socket(domain, SOCK_STREAM, 0);
+ if (sock_fd < 0) {
+ perror("socket fd err");
+ return sock_fd;
+ }
+
+ hint.ai_family = domain;
+ hint.ai_socktype = SOCK_STREAM;
+
+ err = getaddrinfo(addr, port, &hint, &res);
+ if (err) {
+ perror("getaddrinfo failed");
+ goto cleanup;
+ }
+
+ if (opt) {
+ err = setsockopt(sock_fd, SOL_SOCKET, opt, &reuse, sizeof(reuse));
+ if (err) {
+ perror("setsockopt failed");
+ goto cleanup;
+ }
+ }
+
+ err = bind(sock_fd, res->ai_addr, res->ai_addrlen);
+ if (err) {
+ perror("failed to bind to port");
+ goto cleanup;
+ }
+
+ return sock_fd;
+
+cleanup:
+ close(sock_fd);
+ return err;
+}
+
+static void *setup(void *arg)
+{
+ int sock_fd, i;
+ int *array = (int *)arg;
+
+ for (i = 0; i < MAX_CONNECTIONS; i++) {
+ sock_fd = bind_socket(SO_REUSEADDR | SO_REUSEPORT, setup_addr);
+ if (sock_fd < 0) {
+ ret = sock_fd;
+ pthread_exit(&ret);
+ }
+ array[i] = sock_fd;
+ }
+
+ return NULL;
+}
+
+int main(int argc, const char *argv[])
+{
+ int listener_fd, sock_fd, i, j;
+ pthread_t tid[MAX_THREADS];
+ clock_t begin, end;
+
+ if (argc != 4) {
+ printf("Usage: listener <port> <ipv6 | ipv4> <bind-addr>\n");
+ return -1;
+ }
+
+ port = argv[1];
+ use_v6 = strcmp(argv[2], "ipv6") == 0;
+ bind_addr = argv[3];
+
+ setup_addr = use_v6 ? setup_addr_v6 : setup_addr_v4;
+
+ listener_fd = bind_socket(SO_REUSEADDR | SO_REUSEPORT, setup_addr);
+ if (listen(listener_fd, 100) < 0) {
+ perror("listen failed");
+ return -1;
+ }
+
+ /* Set up threads to populate the bhash table entry for the port */
+ for (i = 0; i < MAX_THREADS; i++)
+ pthread_create(&tid[i], NULL, setup, fd_array[i]);
+
+ for (i = 0; i < MAX_THREADS; i++)
+ pthread_join(tid[i], NULL);
+
+ if (ret)
+ goto done;
+
+ begin = clock();
+
+ /* Bind to the same port on a different address */
+ sock_fd = bind_socket(0, bind_addr);
+ if (sock_fd < 0)
+ goto done;
+
+ end = clock();
+
+ printf("time spent = %f\n", (double)(end - begin) / CLOCKS_PER_SEC);
+
+ /* clean up */
+ close(sock_fd);
+
+done:
+ close(listener_fd);
+ for (i = 0; i < MAX_THREADS; i++) {
+ for (j = 0; i < MAX_THREADS; i++)
+ close(fd_array[i][j]);
+ }
+
+ return 0;
+}
new file mode 100755
@@ -0,0 +1,66 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+NR_FILES=32768
+SAVED_NR_FILES=$(ulimit -n)
+
+# default values
+port=443
+addr_v6="2001:0db8:0:f101::1"
+addr_v4="10.8.8.8"
+use_v6=true
+addr=""
+
+usage() {
+ echo "Usage: $0 [-6 | -4] [-p port] [-a address]"
+ echo -e "\t6: use ipv6"
+ echo -e "\t4: use ipv4"
+ echo -e "\tport: Port number"
+ echo -e "\taddress: ip address"
+}
+
+while getopts "ha:p:64" opt; do
+ case ${opt} in
+ h)
+ usage $0
+ exit 0
+ ;;
+ a) addr=$OPTARG;;
+ p)
+ port=$OPTARG;;
+ 6)
+ use_v6=true;;
+ 4)
+ use_v6=false;;
+ esac
+done
+
+setup() {
+ if [[ "$use_v6" == true ]]; then
+ ip addr add $addr_v6 nodad dev eth0
+ else
+ ip addr add $addr_v4 dev lo
+ fi
+ ulimit -n $NR_FILES
+}
+
+cleanup() {
+ if [[ "$use_v6" == true ]]; then
+ ip addr del $addr_v6 dev eth0
+ else
+ ip addr del $addr_v4/32 dev lo
+ fi
+ ulimit -n $SAVED_NR_FILES
+}
+
+if [[ "$addr" != "" ]]; then
+ addr_v4=$addr;
+ addr_v6=$addr;
+fi
+setup
+if [[ "$use_v6" == true ]] ; then
+ ./bind_bhash $port "ipv6" $addr_v6
+else
+ ./bind_bhash $port "ipv4" $addr_v4
+fi
+cleanup
This test populates the bhash table for a given port with MAX_THREADS * MAX_CONNECTIONS sockets, and then times how long a bind request on the port takes. When populating the bhash table, we create the sockets and then bind the sockets to the same address and port (SO_REUSEADDR and SO_REUSEPORT are set). When timing how long a bind on the port takes, we bind on a different address without SO_REUSEPORT set. We do not set SO_REUSEPORT because we are interested in the case where the bind request does not go through the tb->fastreuseport path, which is fragile (eg tb->fastreuseport path does not work if binding with a different uid). To run the script: Usage: ./bind_bhash.sh [-6 | -4] [-p port] [-a address] 6: use ipv6 4: use ipv4 port: Port number address: ip address Without any arguments, ./bind_bhash.sh defaults to ipv6 using ip address "2001:0db8:0:f101::1" on port 443. On my local machine, I see: ipv4: before - 0.002317 seconds with bhash2 - 0.000020 seconds ipv6: before - 0.002431 seconds with bhash2 - 0.000021 seconds Signed-off-by: Joanne Koong <joannelkoong@gmail.com> --- tools/testing/selftests/net/.gitignore | 3 +- tools/testing/selftests/net/Makefile | 3 + tools/testing/selftests/net/bind_bhash.c | 144 ++++++++++++++++++++++ tools/testing/selftests/net/bind_bhash.sh | 66 ++++++++++ 4 files changed, 215 insertions(+), 1 deletion(-) create mode 100644 tools/testing/selftests/net/bind_bhash.c create mode 100755 tools/testing/selftests/net/bind_bhash.sh