| Message ID | 20220820213707.46138-2-lynxis@fe80.eu (mailing list archive) |
|---|---|
| State | Changes Requested |
| Delegated to: | Netdev Maintainers |
| Headers | show |
| Series | [1/2] net: mt7531: only do PLL once after the reset | expand |
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c index 95a57aeb466e..409d5c3d76ea 100644 --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c @@ -2329,6 +2329,10 @@ mt7531_setup(struct dsa_switch *ds) return -ENODEV; } + /* all MACs must be forced link-down before sw reset */ + for (i = 0; i < MT7530_NUM_PORTS; i++) + mt7530_write(priv, MT7530_PMCR_P(i), MT7531_FORCE_LNK); + /* Reset the switch through internal reset */ mt7530_write(priv, MT7530_SYS_CTRL, SYS_CTRL_PHY_RST | SYS_CTRL_SW_RST |
The datasheet [1] explicit describes it as requirement for a reset. [1] MT7531 Reference Manual for Development Board rev 1.0, page 735 Signed-off-by: Alexander Couzens <lynxis@fe80.eu> --- drivers/net/dsa/mt7530.c | 4 ++++ 1 file changed, 4 insertions(+)