@@ -17,7 +17,6 @@
#include <linux/device.h>
#include <linux/gpio/consumer.h>
#include <linux/of.h>
-#include <linux/of_gpio.h>
#include <linux/spi/spi.h>
@@ -137,15 +136,10 @@ static const struct ks8995_chip_params ks8995_chip[] = {
},
};
-struct ks8995_pdata {
- int reset_gpio;
- enum of_gpio_flags reset_gpio_flags;
-};
-
struct ks8995_switch {
struct spi_device *spi;
struct mutex lock;
- struct ks8995_pdata *pdata;
+ struct gpio_desc *reset_gpio;
struct bin_attribute regs_attr;
const struct ks8995_chip_params *chip;
int revision_id;
@@ -401,24 +395,6 @@ static int ks8995_get_revision(struct ks8995_switch *ks)
return err;
}
-/* ks8995_parse_dt - setup platform data from devicetree
- * @ks: pointer to switch instance
- *
- * Parses supported DT properties and sets up platform data
- * accordingly.
- */
-static void ks8995_parse_dt(struct ks8995_switch *ks)
-{
- struct device_node *np = ks->spi->dev.of_node;
- struct ks8995_pdata *pdata = ks->pdata;
-
- if (!np)
- return;
-
- pdata->reset_gpio = of_get_named_gpio_flags(np, "reset-gpios", 0,
- &pdata->reset_gpio_flags);
-}
-
static const struct bin_attribute ks8995_registers_attr = {
.attr = {
.name = "registers",
@@ -449,38 +425,22 @@ static int ks8995_probe(struct spi_device *spi)
ks->spi = spi;
ks->chip = &ks8995_chip[variant];
- if (ks->spi->dev.of_node) {
- ks->pdata = devm_kzalloc(&spi->dev, sizeof(*ks->pdata),
- GFP_KERNEL);
- if (!ks->pdata)
- return -ENOMEM;
-
- ks->pdata->reset_gpio = -1;
-
- ks8995_parse_dt(ks);
+ ks->reset_gpio = devm_gpiod_get_optional(&spi->dev, "reset",
+ GPIOD_OUT_HIGH);
+ err = PTR_ERR_OR_ZERO(ks->reset_gpio);
+ if (err) {
+ dev_err(&spi->dev,
+ "failed to get reset gpio: %d\n", err);
+ return err;
}
- if (!ks->pdata)
- ks->pdata = spi->dev.platform_data;
+ err = gpiod_set_consumer_name(ks->reset_gpio, "switch-reset");
+ if (err)
+ return err;
/* de-assert switch reset */
- if (ks->pdata && gpio_is_valid(ks->pdata->reset_gpio)) {
- unsigned long flags;
-
- flags = (ks->pdata->reset_gpio_flags == OF_GPIO_ACTIVE_LOW ?
- GPIOF_ACTIVE_LOW : 0);
-
- err = devm_gpio_request_one(&spi->dev,
- ks->pdata->reset_gpio,
- flags, "switch-reset");
- if (err) {
- dev_err(&spi->dev,
- "failed to get reset-gpios: %d\n", err);
- return -EIO;
- }
-
- gpiod_set_value(gpio_to_desc(ks->pdata->reset_gpio), 0);
- }
+ /* FIXME: this likely requires a delay */
+ gpiod_set_value_cansleep(ks->reset_gpio, 0);
spi_set_drvdata(spi, ks);
@@ -524,8 +484,7 @@ static void ks8995_remove(struct spi_device *spi)
sysfs_remove_bin_file(&spi->dev.kobj, &ks->regs_attr);
/* assert reset */
- if (ks->pdata && gpio_is_valid(ks->pdata->reset_gpio))
- gpiod_set_value(gpio_to_desc(ks->pdata->reset_gpio), 1);
+ gpiod_set_value_cansleep(ks->reset_gpio, 1);
}
/* ------------------------------------------------------------------------ */
This patch switches the driver away from legacy gpio/of_gpio API to gpiod API, and removes use of of_get_named_gpio_flags() which I want to make private to gpiolib. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> --- drivers/net/phy/spi_ks8995.c | 69 ++++++++---------------------------- 1 file changed, 14 insertions(+), 55 deletions(-)