diff mbox series

[v2,net-next,02/10] dt-bindings: net: dsa: mediatek,mt7530: change mt7530 switch address

Message ID 20220915065542.13150-3-arinc.unal@arinc9.com (mailing list archive)
State Superseded
Delegated to: Netdev Maintainers
Headers show
Series dt-bindings and mt7621 devicetree changes | expand

Checks

Context Check Description
netdev/tree_selection success Clearly marked for net-next
netdev/fixes_present success Fixes tag not required for -next series
netdev/subject_prefix success Link
netdev/cover_letter success Series has a cover letter
netdev/patch_count success Link
netdev/header_inline success No static functions without inline keyword in header files
netdev/build_32bit success Errors and warnings before: 0 this patch: 0
netdev/cc_maintainers warning 1 maintainers not CCed: krzysztof.kozlowski+dt@linaro.org
netdev/build_clang success Errors and warnings before: 0 this patch: 0
netdev/module_param success Was 0 now: 0
netdev/verify_signedoff success Signed-off-by tag matches author and committer
netdev/check_selftest success No net selftest shell script
netdev/verify_fixes success No Fixes tag
netdev/build_allmodconfig_warn success Errors and warnings before: 0 this patch: 0
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 66 lines checked
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/source_inline success Was 0 now: 0

Commit Message

Arınç ÜNAL Sept. 15, 2022, 6:55 a.m. UTC 
In the case of muxing phy0 of the MT7530 switch, the switch and the phy
will have the same address on the mdio bus, 0. This causes the ethernet
driver to fail since devices on the mdio bus cannot share an address.

Any address can be used for the switch, therefore, change the switch
address to 0x1f.

Suggested-by: Sungbo Eo <mans0n@gorani.run>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Rob Herring <robh@kernel.org>
---
 .../bindings/net/dsa/mediatek,mt7530.yaml     | 24 +++++++++----------
 1 file changed, 12 insertions(+), 12 deletions(-)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
index f9e7b6e20b35..2c73d13adf14 100644
--- a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
@@ -294,9 +294,9 @@  examples:
         #address-cells = <1>;
         #size-cells = <0>;
 
-        switch@0 {
+        switch@1f {
             compatible = "mediatek,mt7530";
-            reg = <0>;
+            reg = <0x1f>;
 
             reset-gpios = <&pio 33 0>;
 
@@ -356,9 +356,9 @@  examples:
         #address-cells = <1>;
         #size-cells = <0>;
 
-        switch@0 {
+        switch@1f {
             compatible = "mediatek,mt7530";
-            reg = <0>;
+            reg = <0x1f>;
 
             mediatek,mcm;
             resets = <&ethsys MT2701_ETHSYS_MCM_RST>;
@@ -486,9 +486,9 @@  examples:
         #address-cells = <1>;
         #size-cells = <0>;
 
-        switch@0 {
+        switch@1f {
             compatible = "mediatek,mt7621";
-            reg = <0>;
+            reg = <0x1f>;
 
             mediatek,mcm;
             resets = <&sysc MT7621_RST_MCM>;
@@ -573,9 +573,9 @@  examples:
                 reg = <4>;
             };
 
-            switch@0 {
+            switch@1f {
                 compatible = "mediatek,mt7621";
-                reg = <0>;
+                reg = <0x1f>;
 
                 mediatek,mcm;
                 resets = <&sysc MT7621_RST_MCM>;
@@ -664,9 +664,9 @@  examples:
                 phy-mode = "rgmii";
             };
 
-            switch@0 {
+            switch@1f {
                 compatible = "mediatek,mt7621";
-                reg = <0>;
+                reg = <0x1f>;
 
                 mediatek,mcm;
                 resets = <&sysc MT7621_RST_MCM>;
@@ -745,9 +745,9 @@  examples:
                 phy-mode = "rgmii";
             };
 
-            switch@0 {
+            switch@1f {
                 compatible = "mediatek,mt7621";
-                reg = <0>;
+                reg = <0x1f>;
 
                 mediatek,mcm;
                 resets = <&sysc MT7621_RST_MCM>;