[v2,3/8] phy: renesas: Add Renesas Ethernet SERDES driver for R-Car S4-8

Message ID	20220921084745.3355107-4-yoshihiro.shimoda.uh@renesas.com (mailing list archive)
State	Changes Requested
Headers	show Return-Path: <netdev-owner@kernel.org> From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> To: kishon@ti.com, vkoul@kernel.org, davem@davemloft.net, edumazet@google.com, kuba@kernel.org, pabeni@redhat.com, richardcochran@gmail.com, robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org, geert+renesas@glider.be Cc: andrew@lunn.ch, linux-phy@lists.infradead.org, netdev@vger.kernel.org, devicetree@vger.kernel.org, linux-renesas-soc@vger.kernel.org, Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Subject: [PATCH v2 3/8] phy: renesas: Add Renesas Ethernet SERDES driver for R-Car S4-8 Date: Wed, 21 Sep 2022 17:47:40 +0900 Message-Id: <20220921084745.3355107-4-yoshihiro.shimoda.uh@renesas.com> In-Reply-To: <20220921084745.3355107-1-yoshihiro.shimoda.uh@renesas.com> References: <20220921084745.3355107-1-yoshihiro.shimoda.uh@renesas.com> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Precedence: bulk
Series	treewide: Add R-Car S4-8 Ethernet Switch support \| expand [v2,0/8] treewide: Add R-Car S4-8 Ethernet Switch support [v2,1/8] clk: renesas: r8a779f0: Add Ethernet Switch clocks [v2,2/8] dt-bindings: phy: renesas: Document Renesas Ethernet SERDES [v2,3/8] phy: renesas: Add Renesas Ethernet SERDES driver for R-Car S4-8 [v2,4/8] dt-bindings: net: renesas: Document Renesas Ethernet Switch [v2,5/8] net: ethernet: renesas: Add Ethernet Switch driver [v2,6/8] net: ethernet: renesas: rswitch: Add R-Car Gen4 gPTP support [v2,7/8] arm64: dts: renesas: r8a779f0: Add Ethernet Switch and SERDES nodes [v2,8/8] arm64: dts: renesas: r8a779f0: spider: Enable Ethernet Switch and SERDES

Context	Check	Description
netdev/tree_selection	success	Guessing tree name failed - patch did not apply

diff --git a/drivers/phy/renesas/Kconfig b/drivers/phy/renesas/Kconfig index 111bdcae775c..68f160b0e8ef 100644 --- a/drivers/phy/renesas/Kconfig +++ b/drivers/phy/renesas/Kconfig @@ -32,3 +32,10 @@ config PHY_RCAR_GEN3_USB3 select GENERIC_PHY help Support for USB 3.0 PHY found on Renesas R-Car generation 3 SoCs. + +config PHY_R8A779F0_ETHERNET_SERDES + tristate "Renesas R-Car S4-8 Ethernet SERDES driver" + depends on ARCH_RENESAS || COMPILE_TEST + select GENERIC_PHY + help + Support for Ethernet SERDES found on Renesas R-Car S4-8 SoCs. diff --git a/drivers/phy/renesas/Makefile b/drivers/phy/renesas/Makefile index b599ff8a4349..a2db7125da19 100644 --- a/drivers/phy/renesas/Makefile +++ b/drivers/phy/renesas/Makefile @@ -1,5 +1,5 @@ # SPDX-License-Identifier: GPL-2.0 +obj-$(CONFIG_PHY_R8A779F0_ETHERNET_SERDES) += r8a779f0-ether-serdes.o obj-$(CONFIG_PHY_RCAR_GEN2) += phy-rcar-gen2.o obj-$(CONFIG_PHY_RCAR_GEN3_PCIE) += phy-rcar-gen3-pcie.o obj-$(CONFIG_PHY_RCAR_GEN3_USB2) += phy-rcar-gen3-usb2.o -obj-$(CONFIG_PHY_RCAR_GEN3_USB3) += phy-rcar-gen3-usb3.o diff --git a/drivers/phy/renesas/r8a779f0-ether-serdes.c b/drivers/phy/renesas/r8a779f0-ether-serdes.c new file mode 100644 index 000000000000..1aaf70b3ed3d --- /dev/null +++ b/drivers/phy/renesas/r8a779f0-ether-serdes.c @@ -0,0 +1,303 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Renesas Ethernet SERDES device driver + * + * Copyright (C) 2022 Renesas Electronics Corporation + */ + +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/iopoll.h> +#include <linux/kernel.h> +#include <linux/phy.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> + +#define R8A779F0_ETH_SERDES_NUM 3 +#define R8A779F0_ETH_SERDES_OFFSET 0x0400 +#define R8A779F0_ETH_SERDES_BANK_SELECT 0x03fc +#define R8A779F0_ETH_SERDES_TIMEOUT_US 100000 + +struct r8a779f0_eth_serdes_channel { + struct phy *phy; + void __iomem *addr; + void __iomem *addr0; + phy_interface_t phy_interface; + int speed; +}; + +struct r8a779f0_eth_serdes_drv_data { + void __iomem *addr; + struct platform_device *pdev; + struct r8a779f0_eth_serdes_channel channel[R8A779F0_ETH_SERDES_NUM]; +}; + +/* + * The datasheet describes initialization procedure without any information + * about registers' name/bits. So, this is all black magic to initialize + * the hardware. + */ +static void r8a779f0_eth_serdes_write32(void __iomem *addr, u32 offs, u32 bank, u32 data) +{ + iowrite32(bank, addr + R8A779F0_ETH_SERDES_BANK_SELECT); + iowrite32(data, addr + offs); +} + +static int r8a779f0_eth_serdes_reg_wait(void __iomem *addr, u32 offs, u32 bank, + u32 mask, u32 expected) +{ + u32 val; + + iowrite32(bank, addr + R8A779F0_ETH_SERDES_BANK_SELECT); + + return readl_poll_timeout_atomic(addr + offs, val, (val & mask) == expected, + 1, R8A779F0_ETH_SERDES_TIMEOUT_US); +} + +static int +r8a779f0_eth_serdes_common_init_ram(struct r8a779f0_eth_serdes_channel *channel) +{ + int ret; + + ret = r8a779f0_eth_serdes_reg_wait(channel->addr, 0x026c, 0x180, BIT(0), 0x01); + if (ret) + return ret; + + r8a779f0_eth_serdes_write32(channel->addr0, 0x026c, 0x180, 0x03); + + return ret; +} + +static int +r8a779f0_eth_serdes_common_setting(struct r8a779f0_eth_serdes_channel *channel) +{ + switch (channel->phy_interface) { + case PHY_INTERFACE_MODE_SGMII: + r8a779f0_eth_serdes_write32(channel->addr0, 0x0244, 0x180, 0x0097); + r8a779f0_eth_serdes_write32(channel->addr0, 0x01d0, 0x180, 0x0060); + r8a779f0_eth_serdes_write32(channel->addr0, 0x01d8, 0x180, 0x2200); + r8a779f0_eth_serdes_write32(channel->addr0, 0x01d4, 0x180, 0x0000); + r8a779f0_eth_serdes_write32(channel->addr0, 0x01e0, 0x180, 0x003d); + return 0; + default: + return -EOPNOTSUPP; + } +} + +static int +r8a779f0_eth_serdes_chan_setting(struct r8a779f0_eth_serdes_channel *channel) +{ + int ret; + + switch (channel->phy_interface) { + case PHY_INTERFACE_MODE_SGMII: + r8a779f0_eth_serdes_write32(channel->addr, 0x0000, 0x380, 0x2000); + r8a779f0_eth_serdes_write32(channel->addr, 0x01c0, 0x180, 0x0011); + r8a779f0_eth_serdes_write32(channel->addr, 0x0248, 0x180, 0x0540); + r8a779f0_eth_serdes_write32(channel->addr, 0x0258, 0x180, 0x0015); + r8a779f0_eth_serdes_write32(channel->addr, 0x0144, 0x180, 0x0100); + r8a779f0_eth_serdes_write32(channel->addr, 0x01a0, 0x180, 0x0000); + r8a779f0_eth_serdes_write32(channel->addr, 0x00d0, 0x180, 0x0002); + r8a779f0_eth_serdes_write32(channel->addr, 0x0150, 0x180, 0x0003); + r8a779f0_eth_serdes_write32(channel->addr, 0x00c8, 0x180, 0x0100); + r8a779f0_eth_serdes_write32(channel->addr, 0x0148, 0x180, 0x0100); + r8a779f0_eth_serdes_write32(channel->addr, 0x0174, 0x180, 0x0000); + r8a779f0_eth_serdes_write32(channel->addr, 0x0160, 0x180, 0x0007); + r8a779f0_eth_serdes_write32(channel->addr, 0x01ac, 0x180, 0x0000); + r8a779f0_eth_serdes_write32(channel->addr, 0x00c4, 0x180, 0x0310); + r8a779f0_eth_serdes_write32(channel->addr, 0x00c8, 0x380, 0x0101); + ret = r8a779f0_eth_serdes_reg_wait(channel->addr, 0x00c8, 0x0180, BIT(0), 0); + if (ret) + return ret; + + r8a779f0_eth_serdes_write32(channel->addr, 0x0148, 0x180, 0x0101); + ret = r8a779f0_eth_serdes_reg_wait(channel->addr, 0x0148, 0x0180, BIT(0), 0); + if (ret) + return ret; + + r8a779f0_eth_serdes_write32(channel->addr, 0x00c4, 0x180, 0x1310); + r8a779f0_eth_serdes_write32(channel->addr, 0x00d8, 0x180, 0x1800); + r8a779f0_eth_serdes_write32(channel->addr, 0x00dc, 0x180, 0x0000); + r8a779f0_eth_serdes_write32(channel->addr, 0x001c, 0x300, 0x0001); + r8a779f0_eth_serdes_write32(channel->addr, 0x0000, 0x380, 0x2100); + ret = r8a779f0_eth_serdes_reg_wait(channel->addr, 0x0000, 0x0380, BIT(8), 0); + if (ret) + return ret; + + if (channel->speed == 1000) + r8a779f0_eth_serdes_write32(channel->addr, 0x0000, 0x1f00, 0x0140); + else if (channel->speed == 100) + r8a779f0_eth_serdes_write32(channel->addr, 0x0000, 0x1f00, 0x2100); + break; + default: + return -EOPNOTSUPP; + } + + return 0; +} + +static int r8a779f0_eth_serdes_hw_init(struct r8a779f0_eth_serdes_channel *channel) +{ + int ret; + + ret = r8a779f0_eth_serdes_common_init_ram(channel); + if (ret) + return ret; + + ret = r8a779f0_eth_serdes_reg_wait(channel->addr, 0x0000, 0x300, BIT(15), 0); + if (ret) + return ret; + + r8a779f0_eth_serdes_write32(channel->addr, 0x03d4, 0x380, 0x0443); + + ret = r8a779f0_eth_serdes_common_setting(channel); + if (ret) + return ret; + + r8a779f0_eth_serdes_write32(channel->addr, 0x03d0, 0x380, 0x0001); + + r8a779f0_eth_serdes_write32(channel->addr0, 0x0000, 0x380, 0x8000); + + ret = r8a779f0_eth_serdes_common_init_ram(channel); + if (ret) + return ret; + + ret = r8a779f0_eth_serdes_reg_wait(channel->addr0, 0x0000, 0x380, BIT(15), 0); + if (ret) + return ret; + + ret = r8a779f0_eth_serdes_chan_setting(channel); + if (ret) + return ret; + + r8a779f0_eth_serdes_write32(channel->addr, 0x03c0, 0x380, 0x0000); + r8a779f0_eth_serdes_write32(channel->addr, 0x03d0, 0x380, 0x0000); + + return 0; +} + +static int r8a779f0_eth_serdes_init(struct phy *p) +{ + struct r8a779f0_eth_serdes_channel *channel = phy_get_drvdata(p); + + return r8a779f0_eth_serdes_hw_init(channel); +} + +static int r8a779f0_eth_serdes_set_mode(struct phy *p, enum phy_mode mode, + int submode) +{ + struct r8a779f0_eth_serdes_channel *channel = phy_get_drvdata(p); + + if (mode != PHY_MODE_ETHERNET) + return -EOPNOTSUPP; + + switch (submode) { + case PHY_INTERFACE_MODE_GMII: + case PHY_INTERFACE_MODE_SGMII: + case PHY_INTERFACE_MODE_USXGMII: + channel->phy_interface = submode; + return 0; + default: + return -EOPNOTSUPP; + } +} + +static int r8a779f0_eth_serdes_set_speed(struct phy *p, int speed) +{ + struct r8a779f0_eth_serdes_channel *channel = phy_get_drvdata(p); + + channel->speed = speed; + + return 0; +} + +static const struct phy_ops r8a779f0_eth_serdes_ops = { + .init = r8a779f0_eth_serdes_init, + .set_mode = r8a779f0_eth_serdes_set_mode, + .set_speed = r8a779f0_eth_serdes_set_speed, +}; + +static struct phy *r8a779f0_eth_serdes_xlate(struct device *dev, + struct of_phandle_args *args) +{ + struct r8a779f0_eth_serdes_drv_data *dd = dev_get_drvdata(dev); + + if (args->args[0] >= R8A779F0_ETH_SERDES_NUM) + return ERR_PTR(-ENODEV); + + return dd->channel[args->args[0]].phy; +} + +static const struct of_device_id r8a779f0_eth_serdes_of_table[] = { + { .compatible = "renesas,r8a779f0-ether-serdes", }, + { } +}; +MODULE_DEVICE_TABLE(of, r8a779f0_eth_serdes_of_table); + +static int r8a779f0_eth_serdes_probe(struct platform_device *pdev) +{ + struct r8a779f0_eth_serdes_drv_data *dd; + struct phy_provider *provider; + struct resource *res; + int i, ret; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "invalid resource\n"); + return -EINVAL; + } + + dd = devm_kzalloc(&pdev->dev, sizeof(*dd), GFP_KERNEL); + if (!dd) + return -ENOMEM; + + platform_set_drvdata(pdev, dd); + dd->pdev = pdev; + dd->addr = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(dd->addr)) + return PTR_ERR(dd->addr); + + for (i = 0; i < R8A779F0_ETH_SERDES_NUM; i++) { + struct r8a779f0_eth_serdes_channel *channel = &dd->channel[i]; + + channel->phy = devm_phy_create(&pdev->dev, NULL, + &r8a779f0_eth_serdes_ops); + if (IS_ERR(channel->phy)) + return PTR_ERR(channel->phy); + channel->addr = dd->addr + R8A779F0_ETH_SERDES_OFFSET * i; + channel->addr0 = dd->addr; + phy_set_drvdata(channel->phy, channel); + } + + provider = devm_of_phy_provider_register(&pdev->dev, + r8a779f0_eth_serdes_xlate); + if (IS_ERR(provider)) + return PTR_ERR(provider); + + pm_runtime_enable(&pdev->dev); + pm_runtime_get_sync(&pdev->dev); + + return ret; +} + +static int r8a779f0_eth_serdes_remove(struct platform_device *pdev) +{ + pm_runtime_put(&pdev->dev); + pm_runtime_disable(&pdev->dev); + + platform_set_drvdata(pdev, NULL); + + return 0; +} + +static struct platform_driver r8a779f0_eth_serdes_driver_platform = { + .probe = r8a779f0_eth_serdes_probe, + .remove = r8a779f0_eth_serdes_remove, + .driver = { + .name = "r8a779f0_eth_serdes", + .of_match_table = r8a779f0_eth_serdes_of_table, + } +}; +module_platform_driver(r8a779f0_eth_serdes_driver_platform); +MODULE_AUTHOR("Yoshihiro Shimoda"); +MODULE_DESCRIPTION("Renesas Ethernet SERDES device driver"); +MODULE_LICENSE("GPL");

[v2,3/8] phy: renesas: Add Renesas Ethernet SERDES driver for R-Car S4-8

Checks

Commit Message

Patch