diff mbox series

[7/9] bpf, docs: Add extended 64-bit immediate instructions

Message ID 20221004224745.1430-7-dthaler1968@googlemail.com (mailing list archive)
State Changes Requested
Delegated to: BPF
Headers show
Series [1/9] bpf, docs: Add note about type convention | expand

Checks

Context Check Description
netdev/tree_selection success Not a local patch
bpf/vmtest-bpf-next-PR pending PR summary
bpf/vmtest-bpf-next-VM_Test-1 pending Logs for build for s390x with gcc
bpf/vmtest-bpf-next-VM_Test-4 success Logs for llvm-toolchain
bpf/vmtest-bpf-next-VM_Test-5 success Logs for set-matrix
bpf/vmtest-bpf-next-VM_Test-2 success Logs for build for x86_64 with gcc
bpf/vmtest-bpf-next-VM_Test-3 success Logs for build for x86_64 with llvm-16
bpf/vmtest-bpf-PR fail merge-conflict

Commit Message

Dave Thaler Oct. 4, 2022, 10:47 p.m. UTC 
From: Dave Thaler <dthaler@microsoft.com>

Add extended 64-bit immediate instructions

Signed-off-by: Dave Thaler <dthaler@microsoft.com>
---
 Documentation/bpf/instruction-set.rst | 54 +++++++++++++++++++++++++--
 Documentation/bpf/linux-notes.rst     | 10 +++++
 2 files changed, 60 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/Documentation/bpf/instruction-set.rst b/Documentation/bpf/instruction-set.rst
index 4d5a506be..5ce1a85cd 100644
--- a/Documentation/bpf/instruction-set.rst
+++ b/Documentation/bpf/instruction-set.rst
@@ -425,14 +425,54 @@  and loaded back to ``R0``.
 -----------------------------
 
 Instructions with the ``BPF_IMM`` 'mode' modifier use the wide instruction
-encoding for an extra imm64 value.
+encoding defined in `Instruction encoding`_, and use the 'src' field of the
+basic instruction to hold an opcode subtype.
+
+The following instructions are defined, and use additional concepts defined below:
+
+=========================  ======  ===  =====================================  ===========  ==============
+opcode construction        opcode  src  pseudocode                             imm type     dst type
+=========================  ======  ===  =====================================  ===========  ==============
+BPF_IMM | BPF_DW | BPF_LD  0x18    0x0  dst = imm64                            integer      integer
+BPF_IMM | BPF_DW | BPF_LD  0x18    0x1  dst = map_by_fd(imm)                   map fd       map
+BPF_IMM | BPF_DW | BPF_LD  0x18    0x2  dst = mva(map_by_fd(imm)) + next_imm   map fd       data pointer
+BPF_IMM | BPF_DW | BPF_LD  0x18    0x3  dst = variable_addr(imm)               variable id  data pointer
+BPF_IMM | BPF_DW | BPF_LD  0x18    0x4  dst = code_addr(imm)                   integer      code pointer
+BPF_IMM | BPF_DW | BPF_LD  0x18    0x5  dst = map_by_idx(imm)                  map index    map
+BPF_IMM | BPF_DW | BPF_LD  0x18    0x6  dst = mva(map_by_idx(imm)) + next_imm  map index    data pointer
+=========================  ======  ===  =====================================  ===========  ==============
 
-There is currently only one such instruction.
+where
+
+* map_by_fd(fd) means to convert a 32-bit POSIX file descriptor into an address of a map object (see `Map objects`_)
+* map_by_index(index) means to convert a 32-bit index into an address of a map object
+* mva(map) gets the address of the first value in a given map object
+* variable_addr(id) gets the address of a variable (see `Variables`_) with a given id
+* code_addr(offset) gets the address of the instruction at a specified relative offset in units of 64-bit blocks
+* the 'imm type' can be used by disassemblers for display
+* the 'dst type' can be used for verification and JIT compilation purposes
+
+Map objects
+~~~~~~~~~~~
+
+Maps are shared memory regions accessible by eBPF programs on some platforms, where we use the term "map object"
+to refer to an object containing the data and metadata (e.g., size) about the memory region.
+A map can have various semantics as defined in a separate document, and may or may not have a single
+contiguous memory region, but the 'mva(map)' is currently only defined for maps that do have a single
+contiguous memory region.  Support for maps is optional.
 
-``BPF_LD | BPF_DW | BPF_IMM`` means::
+Each map object can have a POSIX file descriptor (fd) if supported by the platform,
+where 'map_by_fd(fd)' means to get the map with the specified file descriptor.
+Each eBPF program can also be defined to use a set of maps associated with the program
+at load time, and 'map_by_index(index)' means to get the map with the given index in the set
+associated with the eBPF program containing the instruction.
 
-  dst = imm64
+Variables
+~~~~~~~~~
 
+Variables are memory regions, identified by integer ids, accessible by eBPF programs on
+some platforms.  The 'variable_addr(id)' operation means to get the address of the memory region
+identified by the given id.  Support for such variables is optional.
 
 Legacy BPF Packet access instructions
 -------------------------------------
@@ -460,6 +500,12 @@  opcode  src  imm   description                                          referenc
 0x16    0x0  any   if (u32)dst == imm goto +offset                      `Jump instructions`_
 0x17    0x0  any   dst -= imm                                           `Arithmetic instructions`_
 0x18    0x0  any   dst = imm64                                          `64-bit immediate instructions`_
+0x18    0x1  any   dst = map_by_fd(imm)                                 `64-bit immediate instructions`_
+0x18    0x2  any   dst = mva(map_by_fd(imm)) + next_imm                 `64-bit immediate instructions`_
+0x18    0x3  any   dst = variable_addr(imm)                             `64-bit immediate instructions`_
+0x18    0x4  any   dst = code_addr(imm)                                 `64-bit immediate instructions`_
+0x18    0x5  any   dst = map_by_idx(imm)                                `64-bit immediate instructions`_
+0x18    0x6  any   dst = mva(map_by_idx(imm)) + next_imm                `64-bit immediate instructions`_
 0x1c    any  0x00  dst = (u32)(dst - src)                               `Arithmetic instructions`_
 0x1d    any  0x00  if dst == src goto +offset                           `Jump instructions`_
 0x1e    any  0x00  if (u32)dst == (u32)src goto +offset                 `Jump instructions`_
diff --git a/Documentation/bpf/linux-notes.rst b/Documentation/bpf/linux-notes.rst
index 5860b73ea..fb050a485 100644
--- a/Documentation/bpf/linux-notes.rst
+++ b/Documentation/bpf/linux-notes.rst
@@ -17,6 +17,16 @@  Byte swap instructions
 
 ``BPF_FROM_LE`` and ``BPF_FROM_BE`` exist as aliases for ``BPF_TO_LE`` and ``BPF_TO_BE`` respectively.
 
+Map objects
+===========
+
+Linux only supports the 'mva(map)' operation on array maps with a single element.
+
+Variables
+=========
+
+Linux uses BTF ids to identify variables.
+
 Legacy BPF Packet access instructions
 =====================================