diff mbox series

[net-next,v2,03/11] net: dsa: ocelot: suppress PHY device scanning on the internal MDIO bus

Message ID 20221103210650.2325784-4-sean.anderson@seco.com (mailing list archive)
State RFC
Delegated to: Netdev Maintainers
Headers show
Series net: pcs: Add support for devices probed in the "usual" manner | expand

Checks

Context Check Description
netdev/tree_selection success Clearly marked for net-next
netdev/apply fail Patch does not apply to net-next

Commit Message

Sean Anderson Nov. 3, 2022, 9:06 p.m. UTC 
From: Vladimir Oltean <vladimir.oltean@nxp.com>

This bus contains Lynx PCS devices, and if the lynx-pcs driver ever
decided to call mdio_device_register(), it would fail due to
mdiobus_scan() having created a dummy phydev for the same address
(the PCS responds to standard clause 22 PHY ID registers and can
therefore by autodetected by phylib which thinks it's a PHY).

On the Seville driver, things are a bit more complicated, since bus
creation is handled by mscc_miim_setup() and that is shared with the
dedicated mscc-miim driver. Suppress PHY scanning only for the Seville
internal MDIO bus rather than for the whole mscc-miim driver, since we
know that on NXP T1040, this bus only contains Lynx PCS devices.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
---

(no changes since v1)

 drivers/net/dsa/ocelot/felix_vsc9959.c   | 4 ++++
 drivers/net/dsa/ocelot/seville_vsc9953.c | 6 +++++-
 2 files changed, 9 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/net/dsa/ocelot/felix_vsc9959.c b/drivers/net/dsa/ocelot/felix_vsc9959.c
index 26a35ae322d1..ba893055b92d 100644
--- a/drivers/net/dsa/ocelot/felix_vsc9959.c
+++ b/drivers/net/dsa/ocelot/felix_vsc9959.c
@@ -990,6 +990,10 @@  static int vsc9959_mdio_bus_alloc(struct ocelot *ocelot)
 	bus->read = enetc_mdio_read;
 	bus->write = enetc_mdio_write;
 	bus->parent = dev;
+	/* Suppress PHY device creation in mdiobus_scan(),
+	 * we have Lynx PCSs
+	 */
+	bus->phy_mask = ~0;
 	mdio_priv = bus->priv;
 	mdio_priv->hw = hw;
 	/* This gets added to imdio_regs, which already maps addresses
diff --git a/drivers/net/dsa/ocelot/seville_vsc9953.c b/drivers/net/dsa/ocelot/seville_vsc9953.c
index 7af33b2c685d..1e1c6cd265fd 100644
--- a/drivers/net/dsa/ocelot/seville_vsc9953.c
+++ b/drivers/net/dsa/ocelot/seville_vsc9953.c
@@ -924,12 +924,16 @@  static int vsc9953_mdio_bus_alloc(struct ocelot *ocelot)
 	rc = mscc_miim_setup(dev, &bus, "VSC9953 internal MDIO bus",
 			     ocelot->targets[GCB],
 			     ocelot->map[GCB][GCB_MIIM_MII_STATUS & REG_MASK]);
-
 	if (rc) {
 		dev_err(dev, "failed to setup MDIO bus\n");
 		return rc;
 	}
 
+	/* Suppress PHY device creation in mdiobus_scan(),
+	 * we have Lynx PCSs
+	 */
+	bus->phy_mask = ~0;
+
 	/* Needed in order to initialize the bus mutex lock */
 	rc = devm_of_mdiobus_register(dev, bus, NULL);
 	if (rc < 0) {