@@ -72,7 +72,6 @@ static void bcmgenet_mac_config(struct net_device *dev)
* Receive clock is provided by the PHY.
*/
reg = bcmgenet_ext_readl(priv, EXT_RGMII_OOB_CTRL);
- reg &= ~OOB_DISABLE;
reg |= RGMII_LINK;
bcmgenet_ext_writel(priv, reg, EXT_RGMII_OOB_CTRL);
@@ -95,10 +94,18 @@ static void bcmgenet_mac_config(struct net_device *dev)
*/
void bcmgenet_mii_setup(struct net_device *dev)
{
+ struct bcmgenet_priv *priv = netdev_priv(dev);
struct phy_device *phydev = dev->phydev;
+ u32 reg;
- if (phydev->link)
+ if (phydev->link) {
bcmgenet_mac_config(dev);
+ } else {
+ reg = bcmgenet_ext_readl(priv, EXT_RGMII_OOB_CTRL);
+ reg &= ~RGMII_LINK;
+ bcmgenet_ext_writel(priv, reg, EXT_RGMII_OOB_CTRL);
+ }
+
phy_print_status(phydev);
}
@@ -266,18 +273,20 @@ int bcmgenet_mii_config(struct net_device *dev, bool init)
(priv->phy_interface != PHY_INTERFACE_MODE_MOCA);
/* This is an external PHY (xMII), so we need to enable the RGMII
- * block for the interface to work
+ * block for the interface to work, unconditionally clear the
+ * Out-of-band disable since we do not need it.
*/
+ reg = bcmgenet_ext_readl(priv, EXT_RGMII_OOB_CTRL);
+ reg &= ~OOB_DISABLE;
if (priv->ext_phy) {
- reg = bcmgenet_ext_readl(priv, EXT_RGMII_OOB_CTRL);
reg &= ~ID_MODE_DIS;
reg |= id_mode_dis;
if (GENET_IS_V1(priv) || GENET_IS_V2(priv) || GENET_IS_V3(priv))
reg |= RGMII_MODE_EN_V123;
else
reg |= RGMII_MODE_EN;
- bcmgenet_ext_writel(priv, reg, EXT_RGMII_OOB_CTRL);
}
+ bcmgenet_ext_writel(priv, reg, EXT_RGMII_OOB_CTRL);
if (init)
dev_info(kdev, "configuring instance for %s\n", phy_name);
Clear the RGMII_LINK bit upon detecting link down to be consistent with setting the bit upon link up. We also move the clearing of the out-of-band disable to the runtime initialization rather than for each link up/down transition. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> --- drivers/net/ethernet/broadcom/genet/bcmmii.c | 19 ++++++++++++++----- 1 file changed, 14 insertions(+), 5 deletions(-)