@@ -175,6 +175,10 @@ static int ksz_ptp_enable_perout(struct ksz_device *dev,
ptp_data->tou_mode != KSZ_PTP_TOU_IDLE)
return -EBUSY;
+ pin = ptp_find_pin(ptp_data->clock, PTP_PF_PEROUT, request->index);
+ if (pin < 0)
+ return -EINVAL;
+
data32 = FIELD_PREP(PTP_GPIO_INDEX, pin) |
FIELD_PREP(PTP_TOU_INDEX, request->index);
ret = ksz_rmw32(dev, REG_PTP_UNIT_INDEX__4,
@@ -792,6 +796,23 @@ static int ksz_ptp_enable(struct ptp_clock_info *ptp,
return ret;
}
+static int ksz_ptp_verify_pin(struct ptp_clock_info *ptp, unsigned int pin,
+ enum ptp_pin_function func, unsigned int chan)
+{
+ int ret = 0;
+
+ switch (func) {
+ case PTP_PF_NONE:
+ case PTP_PF_PEROUT:
+ break;
+ default:
+ ret = -1;
+ break;
+ }
+
+ return ret;
+}
+
/* Function is pointer to the do_aux_work in the ptp_clock capability */
static long ksz_ptp_do_aux_work(struct ptp_clock_info *ptp)
{
@@ -827,6 +848,7 @@ int ksz_ptp_clock_register(struct dsa_switch *ds)
struct ksz_device *dev = ds->priv;
struct ksz_ptp_data *ptp_data;
int ret;
+ u8 i;
ptp_data = &dev->ptp_data;
mutex_init(&ptp_data->lock);
@@ -841,12 +863,25 @@ int ksz_ptp_clock_register(struct dsa_switch *ds)
ptp_data->caps.adjtime = ksz_ptp_adjtime;
ptp_data->caps.do_aux_work = ksz_ptp_do_aux_work;
ptp_data->caps.enable = ksz_ptp_enable;
+ ptp_data->caps.verify = ksz_ptp_verify_pin;
+ ptp_data->caps.n_pins = KSZ_PTP_N_GPIO;
ptp_data->caps.n_per_out = 3;
ret = ksz_ptp_start_clock(dev);
if (ret)
return ret;
+ for (i = 0; i < KSZ_PTP_N_GPIO; i++) {
+ struct ptp_pin_desc *ptp_pin = &ptp_data->pin_config[i];
+
+ snprintf(ptp_pin->name,
+ sizeof(ptp_pin->name), "ksz_ptp_pin_%02d", i);
+ ptp_pin->index = i;
+ ptp_pin->func = PTP_PF_NONE;
+ }
+
+ ptp_data->caps.pin_config = ptp_data->pin_config;
+
/* Currently only P2P mode is supported. When 802_1AS bit is set, it
* forwards all PTP packets to host port and none to other ports.
*/
@@ -12,6 +12,8 @@
#include <linux/ptp_clock_kernel.h>
+#define KSZ_PTP_N_GPIO 2
+
enum ksz_ptp_tou_mode {
KSZ_PTP_TOU_IDLE,
KSZ_PTP_TOU_PEROUT,
@@ -20,6 +22,7 @@ enum ksz_ptp_tou_mode {
struct ksz_ptp_data {
struct ptp_clock_info caps;
struct ptp_clock *clock;
+ struct ptp_pin_desc pin_config[KSZ_PTP_N_GPIO];
/* Serializes all operations on the PTP hardware clock */
struct mutex lock;
/* lock for accessing the clock_time */
There are two programmable pins available for Trigger output unit to generate periodic pulses. This patch add verify_pin for the available 2 pins and configure it with respect to GPIO index for the TOU unit. Tested using testptp ./testptp -i 0 -L 0,2 ./testptp -i 0 -d /dev/ptp0 -p 1000000000 ./testptp -i 1 -L 1,2 ./testptp -i 1 -d /dev/ptp0 -p 100000000 Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> --- v1 - v2 - checkpatch warning to limit 80 chars Patch v1 - patch is new --- drivers/net/dsa/microchip/ksz_ptp.c | 35 +++++++++++++++++++++++++++++ drivers/net/dsa/microchip/ksz_ptp.h | 3 +++ 2 files changed, 38 insertions(+)