@@ -477,6 +477,19 @@ static inline int ksz_rmw16(struct ksz_device *dev, u32 reg, u16 mask,
return ret;
}
+static inline int ksz_rmw32(struct ksz_device *dev, u32 reg, u32 mask,
+ u32 value)
+{
+ int ret;
+
+ ret = regmap_update_bits(dev->regmap[2], reg, mask, value);
+ if (ret)
+ dev_err(dev->dev, "can't rmw 32bit reg 0x%x: %pe\n", reg,
+ ERR_PTR(ret));
+
+ return ret;
+}
+
static inline int ksz_write64(struct ksz_device *dev, u32 reg, u64 value)
{
u32 val[2];
@@ -25,12 +25,210 @@
* = (2^30-1) * (2 ^ 32) / 40 ns * 1 ns = 6249999
*/
#define KSZ_MAX_DRIFT_CORR 6249999
+#define KSZ_MAX_PULSE_WIDTH 125000000LL
#define KSZ_PTP_INC_NS 40ULL /* HW clock is incremented every 40 ns (by 40) */
#define KSZ_PTP_SUBNS_BITS 32
#define KSZ_PTP_INT_START 13
+static int ksz_ptp_tou_reset(struct ksz_device *dev, u8 unit)
+{
+ u32 data;
+ int ret;
+
+ /* Reset trigger unit (clears TRIGGER_EN, but not GPIOSTATx) */
+ ret = ksz_rmw32(dev, REG_PTP_CTRL_STAT__4, TRIG_RESET, TRIG_RESET);
+
+ data = FIELD_PREP(TRIG_DONE_M, BIT(unit));
+ ret = ksz_write32(dev, REG_PTP_TRIG_STATUS__4, data);
+ if (ret)
+ return ret;
+
+ data = FIELD_PREP(TRIG_INT_M, BIT(unit));
+ ret = ksz_write32(dev, REG_PTP_INT_STATUS__4, data);
+ if (ret)
+ return ret;
+
+ /* Clear reset and set GPIO direction */
+ return ksz_rmw32(dev, REG_PTP_CTRL_STAT__4, (TRIG_RESET | TRIG_ENABLE),
+ 0);
+}
+
+static int ksz_ptp_tou_pulse_verify(u64 pulse_ns)
+{
+ u32 data;
+
+ if (pulse_ns & 0x3)
+ return -EINVAL;
+
+ data = (pulse_ns / 8);
+ if (!FIELD_FIT(TRIG_PULSE_WIDTH_M, data))
+ return -ERANGE;
+
+ return 0;
+}
+
+static int ksz_ptp_tou_target_time_set(struct ksz_device *dev,
+ struct timespec64 const *ts)
+{
+ int ret;
+
+ /* Hardware has only 32 bit */
+ if ((ts->tv_sec & 0xffffffff) != ts->tv_sec)
+ return -EINVAL;
+
+ ret = ksz_write32(dev, REG_TRIG_TARGET_NANOSEC, ts->tv_nsec);
+ if (ret)
+ return ret;
+
+ ret = ksz_write32(dev, REG_TRIG_TARGET_SEC, ts->tv_sec);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int ksz_ptp_tou_start(struct ksz_device *dev, u8 unit)
+{
+ u32 data;
+ int ret;
+
+ ret = ksz_rmw32(dev, REG_PTP_CTRL_STAT__4, TRIG_ENABLE, TRIG_ENABLE);
+ if (ret)
+ return ret;
+
+ /* Check error flag:
+ * - the ACTIVE flag is NOT cleared an error!
+ */
+ ret = ksz_read32(dev, REG_PTP_TRIG_STATUS__4, &data);
+ if (ret)
+ return ret;
+
+ if (FIELD_GET(TRIG_ERROR_M, data) & (1 << unit)) {
+ dev_err(dev->dev, "%s: Trigger unit%d error!\n", __func__,
+ unit);
+ ret = -EIO;
+ /* Unit will be reset on next access */
+ return ret;
+ }
+
+ return 0;
+}
+
+static int ksz_ptp_configure_perout(struct ksz_device *dev,
+ u32 cycle_width_ns, u32 pulse_width_ns,
+ struct timespec64 const *target_time,
+ u8 index)
+{
+ u32 data;
+ int ret;
+
+ data = FIELD_PREP(TRIG_NOTIFY, 1) |
+ FIELD_PREP(TRIG_GPO_M, index) |
+ FIELD_PREP(TRIG_PATTERN_M, TRIG_POS_PERIOD);
+ ret = ksz_write32(dev, REG_TRIG_CTRL__4, data);
+ if (ret)
+ return ret;
+
+ ret = ksz_write32(dev, REG_TRIG_CYCLE_WIDTH, cycle_width_ns);
+ if (ret)
+ return ret;
+
+ /* Set cycle count 0 - Infinite */
+ ret = ksz_rmw32(dev, REG_TRIG_CYCLE_CNT, TRIG_CYCLE_CNT_M, 0);
+ if (ret)
+ return ret;
+
+ data = (pulse_width_ns / 8);
+ ret = ksz_write32(dev, REG_TRIG_PULSE_WIDTH__4, data);
+ if (ret)
+ return ret;
+
+ ret = ksz_ptp_tou_target_time_set(dev, target_time);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int ksz_ptp_enable_perout(struct ksz_device *dev,
+ struct ptp_perout_request const *request,
+ int on)
+{
+ struct ksz_ptp_data *ptp_data = &dev->ptp_data;
+ u64 req_pulse_width_ns;
+ u64 cycle_width_ns;
+ u64 pulse_width_ns;
+ int pin = 0;
+ u32 data32;
+ int ret;
+
+ if (request->flags & ~PTP_PEROUT_DUTY_CYCLE)
+ return -EOPNOTSUPP;
+
+ if (ptp_data->tou_mode != KSZ_PTP_TOU_PEROUT &&
+ ptp_data->tou_mode != KSZ_PTP_TOU_IDLE)
+ return -EBUSY;
+
+ data32 = FIELD_PREP(PTP_GPIO_INDEX, pin) |
+ FIELD_PREP(PTP_TOU_INDEX, request->index);
+ ret = ksz_rmw32(dev, REG_PTP_UNIT_INDEX__4,
+ PTP_GPIO_INDEX | PTP_TOU_INDEX, data32);
+ if (ret)
+ return ret;
+
+ ret = ksz_ptp_tou_reset(dev, request->index);
+ if (ret)
+ return ret;
+
+ if (!on) {
+ ptp_data->tou_mode = KSZ_PTP_TOU_IDLE;
+ return 0;
+ }
+
+ ptp_data->perout_target_time_first.tv_sec = request->start.sec;
+ ptp_data->perout_target_time_first.tv_nsec = request->start.nsec;
+
+ ptp_data->perout_period.tv_sec = request->period.sec;
+ ptp_data->perout_period.tv_nsec = request->period.nsec;
+
+ cycle_width_ns = timespec64_to_ns(&ptp_data->perout_period);
+ if ((cycle_width_ns & TRIG_CYCLE_WIDTH_M) != cycle_width_ns)
+ return -EINVAL;
+
+ if (request->flags & PTP_PEROUT_DUTY_CYCLE) {
+ pulse_width_ns = request->on.sec * NSEC_PER_SEC +
+ request->on.nsec;
+ } else {
+ /* Use a duty cycle of 50%. Maximum pulse width supported by the
+ * hardware is a little bit more than 125 ms.
+ */
+ req_pulse_width_ns = (request->period.sec * NSEC_PER_SEC +
+ request->period.nsec) / 2;
+ pulse_width_ns = min_t(u64, req_pulse_width_ns,
+ KSZ_MAX_PULSE_WIDTH);
+ }
+
+ ret = ksz_ptp_tou_pulse_verify(pulse_width_ns);
+ if (ret)
+ return ret;
+
+ ret = ksz_ptp_configure_perout(dev, cycle_width_ns, pulse_width_ns,
+ &ptp_data->perout_target_time_first,
+ pin);
+ if (ret)
+ return ret;
+
+ ret = ksz_ptp_tou_start(dev, request->index);
+ if (ret)
+ return ret;
+
+ ptp_data->tou_mode = KSZ_PTP_TOU_PEROUT;
+
+ return 0;
+}
+
static int ksz_ptp_enable_mode(struct ksz_device *dev)
{
struct ksz_tagger_data *tagger_data = ksz_tagger_data(dev->ds);
@@ -370,6 +568,51 @@ static int ksz_ptp_gettime(struct ptp_clock_info *ptp, struct timespec64 *ts)
return ret;
}
+static int ksz_ptp_restart_perout(struct ksz_device *dev)
+{
+ struct ksz_ptp_data *ptp_data = &dev->ptp_data;
+ s64 now_ns, first_ns, period_ns, next_ns;
+ struct ptp_perout_request request;
+ struct timespec64 next;
+ struct timespec64 now;
+ unsigned int count;
+ int ret;
+
+ dev_info(dev->dev, "Restarting periodic output signal\n");
+
+ ret = _ksz_ptp_gettime(dev, &now);
+ if (ret)
+ return ret;
+
+ now_ns = timespec64_to_ns(&now);
+ first_ns = timespec64_to_ns(&ptp_data->perout_target_time_first);
+
+ /* Calculate next perout event based on start time and period */
+ period_ns = timespec64_to_ns(&ptp_data->perout_period);
+
+ if (first_ns < now_ns) {
+ count = div_u64(now_ns - first_ns, period_ns);
+ next_ns = first_ns + count * period_ns;
+ } else {
+ next_ns = first_ns;
+ }
+
+ /* Ensure 100 ms guard time prior next event */
+ while (next_ns < now_ns + 100000000)
+ next_ns += period_ns;
+
+ /* Restart periodic output signal */
+ next = ns_to_timespec64(next_ns);
+ request.start.sec = next.tv_sec;
+ request.start.nsec = next.tv_nsec;
+ request.period.sec = ptp_data->perout_period.tv_sec;
+ request.period.nsec = ptp_data->perout_period.tv_nsec;
+ request.index = 0;
+ request.flags = 0;
+
+ return ksz_ptp_enable_perout(dev, &request, 1);
+}
+
static int ksz_ptp_settime(struct ptp_clock_info *ptp,
const struct timespec64 *ts)
{
@@ -396,6 +639,18 @@ static int ksz_ptp_settime(struct ptp_clock_info *ptp,
if (ret)
goto unlock;
+ switch (ptp_data->tou_mode) {
+ case KSZ_PTP_TOU_IDLE:
+ break;
+
+ case KSZ_PTP_TOU_PEROUT:
+ ret = ksz_ptp_restart_perout(dev);
+ if (ret)
+ goto unlock;
+
+ break;
+ }
+
spin_lock_bh(&ptp_data->clock_lock);
ptp_data->clock_time = *ts;
spin_unlock_bh(&ptp_data->clock_lock);
@@ -485,6 +740,18 @@ static int ksz_ptp_adjtime(struct ptp_clock_info *ptp, s64 delta)
if (ret)
goto unlock;
+ switch (ptp_data->tou_mode) {
+ case KSZ_PTP_TOU_IDLE:
+ break;
+
+ case KSZ_PTP_TOU_PEROUT:
+ ret = ksz_ptp_restart_perout(dev);
+ if (ret)
+ goto unlock;
+
+ break;
+ }
+
spin_lock_bh(&ptp_data->clock_lock);
ptp_data->clock_time = timespec64_add(ptp_data->clock_time, delta64);
spin_unlock_bh(&ptp_data->clock_lock);
@@ -494,6 +761,26 @@ static int ksz_ptp_adjtime(struct ptp_clock_info *ptp, s64 delta)
return ret;
}
+static int ksz_ptp_enable(struct ptp_clock_info *ptp,
+ struct ptp_clock_request *req, int on)
+{
+ struct ksz_ptp_data *ptp_data = ptp_caps_to_data(ptp);
+ struct ksz_device *dev = ptp_data_to_ksz_dev(ptp_data);
+ int ret;
+
+ switch (req->type) {
+ case PTP_CLK_REQ_PEROUT:
+ mutex_lock(&ptp_data->lock);
+ ret = ksz_ptp_enable_perout(dev, &req->perout, on);
+ mutex_unlock(&ptp_data->lock);
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+
+ return ret;
+}
+
/* Function is pointer to the do_aux_work in the ptp_clock capability */
static long ksz_ptp_do_aux_work(struct ptp_clock_info *ptp)
{
@@ -542,6 +829,8 @@ int ksz_ptp_clock_register(struct dsa_switch *ds)
ptp_data->caps.adjfine = ksz_ptp_adjfine;
ptp_data->caps.adjtime = ksz_ptp_adjtime;
ptp_data->caps.do_aux_work = ksz_ptp_do_aux_work;
+ ptp_data->caps.enable = ksz_ptp_enable;
+ ptp_data->caps.n_per_out = 3;
ret = ksz_ptp_start_clock(dev);
if (ret)
@@ -12,6 +12,11 @@
#include <linux/ptp_clock_kernel.h>
+enum ksz_ptp_tou_mode {
+ KSZ_PTP_TOU_IDLE,
+ KSZ_PTP_TOU_PEROUT,
+};
+
struct ksz_ptp_data {
struct ptp_clock_info caps;
struct ptp_clock *clock;
@@ -20,6 +25,9 @@ struct ksz_ptp_data {
/* lock for accessing the clock_time */
spinlock_t clock_lock;
struct timespec64 clock_time;
+ enum ksz_ptp_tou_mode tou_mode;
+ struct timespec64 perout_target_time_first; /* start of first pulse */
+ struct timespec64 perout_period;
};
int ksz_ptp_clock_register(struct dsa_switch *ds);
@@ -49,6 +49,69 @@
#define PTP_MASTER BIT(1)
#define PTP_1STEP BIT(0)
+#define REG_PTP_UNIT_INDEX__4 0x0520
+
+#define PTP_GPIO_INDEX GENMASK(19, 16)
+#define PTP_TSI_INDEX BIT(8)
+#define PTP_TOU_INDEX GENMASK(1, 0)
+
+#define REG_PTP_TRIG_STATUS__4 0x0524
+
+#define TRIG_ERROR_M GENMASK(18, 16)
+#define TRIG_DONE_M GENMASK(2, 0)
+
+#define REG_PTP_INT_STATUS__4 0x0528
+
+#define TRIG_INT_M GENMASK(18, 16)
+#define TS_INT_M GENMASK(1, 0)
+
+#define REG_PTP_CTRL_STAT__4 0x052C
+
+#define GPIO_IN BIT(7)
+#define GPIO_OUT BIT(6)
+#define TS_INT_ENABLE BIT(5)
+#define TRIG_ACTIVE BIT(4)
+#define TRIG_ENABLE BIT(3)
+#define TRIG_RESET BIT(2)
+#define TS_ENABLE BIT(1)
+#define TS_RESET BIT(0)
+
+#define REG_TRIG_TARGET_NANOSEC 0x0530
+#define REG_TRIG_TARGET_SEC 0x0534
+
+#define REG_TRIG_CTRL__4 0x0538
+
+#define TRIG_CASCADE_ENABLE BIT(31)
+#define TRIG_CASCADE_TAIL BIT(30)
+#define TRIG_CASCADE_UPS_M GENMASK(29, 26)
+#define TRIG_NOW BIT(25)
+#define TRIG_NOTIFY BIT(24)
+#define TRIG_EDGE BIT(23)
+#define TRIG_PATTERN_M GENMASK(22, 20)
+#define TRIG_NEG_EDGE 0
+#define TRIG_POS_EDGE 1
+#define TRIG_NEG_PULSE 2
+#define TRIG_POS_PULSE 3
+#define TRIG_NEG_PERIOD 4
+#define TRIG_POS_PERIOD 5
+#define TRIG_REG_OUTPUT 6
+#define TRIG_GPO_M GENMASK(19, 16)
+#define TRIG_CASCADE_ITERATE_CNT_M GENMASK(15, 0)
+
+#define REG_TRIG_CYCLE_WIDTH 0x053C
+#define TRIG_CYCLE_WIDTH_M GENMASK(31, 0)
+
+#define REG_TRIG_CYCLE_CNT 0x0540
+
+#define TRIG_CYCLE_CNT_M GENMASK(31, 16)
+#define TRIG_BIT_PATTERN_M GENMASK(15, 0)
+
+#define REG_TRIG_ITERATE_TIME 0x0544
+
+#define REG_TRIG_PULSE_WIDTH__4 0x0548
+
+#define TRIG_PULSE_WIDTH_M GENMASK(23, 0)
+
/* Port PTP Register */
#define REG_PTP_PORT_RX_DELAY__2 0x0C00
#define REG_PTP_PORT_TX_DELAY__2 0x0C02