@@ -802,7 +802,7 @@ static int wx_del_mac_filter(struct wx *wx, u8 *addr, u16 pool)
**/
int wx_set_mac(struct net_device *netdev, void *p)
{
- struct wx *wx = container_of(&netdev, struct wx, netdev);
+ struct wx *wx = netdev_priv(netdev);
struct sockaddr *addr = p;
int retval;
@@ -316,7 +316,9 @@ struct wx {
u8 revision_id;
u16 oem_ssid;
u16 oem_svid;
+ u16 msg_enable;
bool adapter_stopped;
+ char eeprom_id[32];
enum wx_reset_type reset_type;
};
@@ -253,25 +253,22 @@ int txgbe_validate_eeprom_checksum(struct wx *wx, u16 *checksum_val)
return status;
}
-static void txgbe_reset_misc(struct txgbe_adapter *adapter)
+static void txgbe_reset_misc(struct wx *wx)
{
- struct wx *wx = &adapter->wx;
-
wx_reset_misc(wx);
txgbe_init_thermal_sensor_thresh(wx);
}
/**
* txgbe_reset_hw - Perform hardware reset
- * @adapter: pointer to adapter structure
+ * @wx: pointer to wx structure
*
* Resets the hardware by resetting the transmit and receive units, masks
* and clears all interrupts, perform a PHY reset, and perform a link (MAC)
* reset.
**/
-int txgbe_reset_hw(struct txgbe_adapter *adapter)
+int txgbe_reset_hw(struct wx *wx)
{
- struct wx *wx = &adapter->wx;
int status;
/* Call adapter stop to disable tx/rx and clear interrupts */
@@ -289,7 +286,7 @@ int txgbe_reset_hw(struct txgbe_adapter *adapter)
if (status != 0)
return status;
- txgbe_reset_misc(adapter);
+ txgbe_reset_misc(wx);
/* Store the permanent mac address */
wx_get_mac_addr(wx, wx->mac.perm_addr);
@@ -6,6 +6,6 @@
int txgbe_read_pba_string(struct wx *wx, u8 *pba_num, u32 pba_num_size);
int txgbe_validate_eeprom_checksum(struct wx *wx, u16 *checksum_val);
-int txgbe_reset_hw(struct txgbe_adapter *adapter);
+int txgbe_reset_hw(struct wx *wx);
#endif /* _TXGBE_HW_H_ */
@@ -34,26 +34,26 @@ static const struct pci_device_id txgbe_pci_tbl[] = {
#define DEFAULT_DEBUG_LEVEL_SHIFT 3
-static void txgbe_check_minimum_link(struct txgbe_adapter *adapter)
+static void txgbe_check_minimum_link(struct wx *wx)
{
struct pci_dev *pdev;
- pdev = adapter->pdev;
+ pdev = wx->pdev;
pcie_print_link_status(pdev);
}
/**
* txgbe_enumerate_functions - Get the number of ports this device has
- * @adapter: adapter structure
+ * @wx: wx structure
*
* This function enumerates the phsyical functions co-located on a single slot,
* in order to determine how many ports a device has. This is most useful in
* determining the required GT/s of PCIe bandwidth necessary for optimal
* performance.
**/
-static int txgbe_enumerate_functions(struct txgbe_adapter *adapter)
+static int txgbe_enumerate_functions(struct wx *wx)
{
- struct pci_dev *entry, *pdev = adapter->pdev;
+ struct pci_dev *entry, *pdev = wx->pdev;
int physfns = 0;
list_for_each_entry(entry, &pdev->bus->devices, bus_list) {
@@ -72,23 +72,20 @@ static int txgbe_enumerate_functions(struct txgbe_adapter *adapter)
return physfns;
}
-static void txgbe_up_complete(struct txgbe_adapter *adapter)
+static void txgbe_up_complete(struct wx *wx)
{
- struct wx *wx = &adapter->wx;
-
wx_control_hw(wx, true);
}
-static void txgbe_reset(struct txgbe_adapter *adapter)
+static void txgbe_reset(struct wx *wx)
{
- struct net_device *netdev = adapter->netdev;
- struct wx *wx = &adapter->wx;
+ struct net_device *netdev = wx->netdev;
u8 old_addr[ETH_ALEN];
int err;
- err = txgbe_reset_hw(adapter);
+ err = txgbe_reset_hw(wx);
if (err != 0)
- dev_err(&adapter->pdev->dev, "Hardware Error: %d\n", err);
+ wx_err(wx, "Hardware Error: %d\n", err);
/* do not flush user set addresses */
memcpy(old_addr, &wx->mac_table[0].addr, netdev->addr_len);
@@ -96,10 +93,9 @@ static void txgbe_reset(struct txgbe_adapter *adapter)
wx_mac_set_default_filter(wx, old_addr);
}
-static void txgbe_disable_device(struct txgbe_adapter *adapter)
+static void txgbe_disable_device(struct wx *wx)
{
- struct net_device *netdev = adapter->netdev;
- struct wx *wx = &adapter->wx;
+ struct net_device *netdev = wx->netdev;
wx_disable_pcie_master(wx);
/* disable receives */
@@ -111,9 +107,8 @@ static void txgbe_disable_device(struct txgbe_adapter *adapter)
if (wx->bus.func < 2)
wr32m(wx, TXGBE_MIS_PRB_CTL, TXGBE_MIS_PRB_CTL_LAN_UP(wx->bus.func), 0);
else
- dev_err(&adapter->pdev->dev,
- "%s: invalid bus lan id %d\n",
- __func__, wx->bus.func);
+ wx_err(wx, "%s: invalid bus lan id %d\n",
+ __func__, wx->bus.func);
if (!(((wx->subsystem_device_id & WX_NCSI_MASK) == WX_NCSI_SUP) ||
((wx->subsystem_device_id & WX_WOL_MASK) == WX_WOL_SUP))) {
@@ -125,25 +120,20 @@ static void txgbe_disable_device(struct txgbe_adapter *adapter)
wr32m(wx, WX_TDM_CTL, WX_TDM_CTL_TE, 0);
}
-static void txgbe_down(struct txgbe_adapter *adapter)
+static void txgbe_down(struct wx *wx)
{
- txgbe_disable_device(adapter);
- txgbe_reset(adapter);
+ txgbe_disable_device(wx);
+ txgbe_reset(wx);
}
/**
- * txgbe_sw_init - Initialize general software structures (struct txgbe_adapter)
- * @adapter: board private structure to initialize
+ * txgbe_sw_init - Initialize general software structures (struct wx)
+ * @wx: board private structure to initialize
**/
-static int txgbe_sw_init(struct txgbe_adapter *adapter)
+static int txgbe_sw_init(struct wx *wx)
{
- struct pci_dev *pdev = adapter->pdev;
- struct wx *wx = &adapter->wx;
int err;
- wx->hw_addr = adapter->io_addr;
- wx->pdev = pdev;
-
wx->mac.num_rar_entries = TXGBE_SP_RAR_ENTRIES;
wx->mac.max_tx_queues = TXGBE_SP_MAX_TX_QUEUES;
wx->mac.max_rx_queues = TXGBE_SP_MAX_RX_QUEUES;
@@ -152,8 +142,7 @@ static int txgbe_sw_init(struct txgbe_adapter *adapter)
/* PCI config space info */
err = wx_sw_init(wx);
if (err < 0) {
- netif_err(adapter, probe, adapter->netdev,
- "read of internal subsystem device id failed\n");
+ wx_err(wx, "read of internal subsystem device id failed\n");
return err;
}
@@ -181,23 +170,23 @@ static int txgbe_sw_init(struct txgbe_adapter *adapter)
**/
static int txgbe_open(struct net_device *netdev)
{
- struct txgbe_adapter *adapter = netdev_priv(netdev);
+ struct wx *wx = netdev_priv(netdev);
- txgbe_up_complete(adapter);
+ txgbe_up_complete(wx);
return 0;
}
/**
* txgbe_close_suspend - actions necessary to both suspend and close flows
- * @adapter: the private adapter struct
+ * @wx: the private wx struct
*
* This function should contain the necessary work common to both suspending
* and closing of the device.
*/
-static void txgbe_close_suspend(struct txgbe_adapter *adapter)
+static void txgbe_close_suspend(struct wx *wx)
{
- txgbe_disable_device(adapter);
+ txgbe_disable_device(wx);
}
/**
@@ -213,25 +202,25 @@ static void txgbe_close_suspend(struct txgbe_adapter *adapter)
**/
static int txgbe_close(struct net_device *netdev)
{
- struct txgbe_adapter *adapter = netdev_priv(netdev);
+ struct wx *wx = netdev_priv(netdev);
- txgbe_down(adapter);
- wx_control_hw(&adapter->wx, false);
+ txgbe_down(wx);
+ wx_control_hw(wx, false);
return 0;
}
static void txgbe_dev_shutdown(struct pci_dev *pdev, bool *enable_wake)
{
- struct txgbe_adapter *adapter = pci_get_drvdata(pdev);
- struct net_device *netdev = adapter->netdev;
- struct wx *wx = &adapter->wx;
+ struct wx *wx = pci_get_drvdata(pdev);
+ struct net_device *netdev;
+ netdev = wx->netdev;
netif_device_detach(netdev);
rtnl_lock();
if (netif_running(netdev))
- txgbe_close_suspend(adapter);
+ txgbe_close_suspend(wx);
rtnl_unlock();
wx_control_hw(wx, false);
@@ -273,16 +262,15 @@ static const struct net_device_ops txgbe_netdev_ops = {
* Returns 0 on success, negative on failure
*
* txgbe_probe initializes an adapter identified by a pci_dev structure.
- * The OS initialization, configuring of the adapter private structure,
+ * The OS initialization, configuring of the wx private structure,
* and a hardware reset occur.
**/
static int txgbe_probe(struct pci_dev *pdev,
const struct pci_device_id __always_unused *ent)
{
- struct txgbe_adapter *adapter = NULL;
- struct wx *wx = NULL;
struct net_device *netdev;
int err, expected_gts;
+ struct wx *wx = NULL;
u16 eeprom_verh = 0, eeprom_verl = 0, offset = 0;
u16 eeprom_cfg_blkh = 0, eeprom_cfg_blkl = 0;
@@ -314,7 +302,7 @@ static int txgbe_probe(struct pci_dev *pdev,
pci_set_master(pdev);
netdev = devm_alloc_etherdev_mqs(&pdev->dev,
- sizeof(struct txgbe_adapter),
+ sizeof(struct wx),
TXGBE_MAX_TX_QUEUES,
TXGBE_MAX_RX_QUEUES);
if (!netdev) {
@@ -324,17 +312,16 @@ static int txgbe_probe(struct pci_dev *pdev,
SET_NETDEV_DEV(netdev, &pdev->dev);
- adapter = netdev_priv(netdev);
- adapter->netdev = netdev;
- adapter->pdev = pdev;
- wx = &adapter->wx;
+ wx = netdev_priv(netdev);
wx->netdev = netdev;
- adapter->msg_enable = (1 << DEFAULT_DEBUG_LEVEL_SHIFT) - 1;
+ wx->pdev = pdev;
- adapter->io_addr = devm_ioremap(&pdev->dev,
- pci_resource_start(pdev, 0),
- pci_resource_len(pdev, 0));
- if (!adapter->io_addr) {
+ wx->msg_enable = (1 << DEFAULT_DEBUG_LEVEL_SHIFT) - 1;
+
+ wx->hw_addr = devm_ioremap(&pdev->dev,
+ pci_resource_start(pdev, 0),
+ pci_resource_len(pdev, 0));
+ if (!wx->hw_addr) {
err = -EIO;
goto err_pci_release_regions;
}
@@ -342,7 +329,7 @@ static int txgbe_probe(struct pci_dev *pdev,
netdev->netdev_ops = &txgbe_netdev_ops;
/* setup the private structure */
- err = txgbe_sw_init(adapter);
+ err = txgbe_sw_init(wx);
if (err)
goto err_free_mac_table;
@@ -360,7 +347,7 @@ static int txgbe_probe(struct pci_dev *pdev,
goto err_free_mac_table;
}
- err = txgbe_reset_hw(adapter);
+ err = txgbe_reset_hw(wx);
if (err) {
dev_err(&pdev->dev, "HW Init failed: %d\n", err);
goto err_free_mac_table;
@@ -406,15 +393,15 @@ static int txgbe_probe(struct pci_dev *pdev,
build = (eeprom_cfg_blkl << 8) | (eeprom_cfg_blkh >> 8);
patch = eeprom_cfg_blkh & 0x00ff;
- snprintf(adapter->eeprom_id, sizeof(adapter->eeprom_id),
+ snprintf(wx->eeprom_id, sizeof(wx->eeprom_id),
"0x%08x, %d.%d.%d", etrack_id, major, build,
patch);
} else {
- snprintf(adapter->eeprom_id, sizeof(adapter->eeprom_id),
+ snprintf(wx->eeprom_id, sizeof(wx->eeprom_id),
"0x%08x", etrack_id);
}
} else {
- snprintf(adapter->eeprom_id, sizeof(adapter->eeprom_id),
+ snprintf(wx->eeprom_id, sizeof(wx->eeprom_id),
"0x%08x", etrack_id);
}
@@ -422,7 +409,7 @@ static int txgbe_probe(struct pci_dev *pdev,
if (err)
goto err_release_hw;
- pci_set_drvdata(pdev, adapter);
+ pci_set_drvdata(pdev, wx);
/* calculate the expected PCIe bandwidth required for optimal
* performance. Note that some older parts will never have enough
@@ -430,11 +417,11 @@ static int txgbe_probe(struct pci_dev *pdev,
* parts to ensure that no warning is displayed, as this could confuse
* users otherwise.
*/
- expected_gts = txgbe_enumerate_functions(adapter) * 10;
+ expected_gts = txgbe_enumerate_functions(wx) * 10;
/* don't check link if we failed to enumerate functions */
if (expected_gts > 0)
- txgbe_check_minimum_link(adapter);
+ txgbe_check_minimum_link(wx);
else
dev_warn(&pdev->dev, "Failed to enumerate PF devices.\n");
@@ -443,7 +430,7 @@ static int txgbe_probe(struct pci_dev *pdev,
if (err)
strncpy(part_str, "Unknown", TXGBE_PBANUM_LENGTH);
- netif_info(adapter, probe, netdev, "%pM\n", netdev->dev_addr);
+ netif_info(wx, probe, netdev, "%pM\n", netdev->dev_addr);
return 0;
@@ -471,16 +458,16 @@ static int txgbe_probe(struct pci_dev *pdev,
**/
static void txgbe_remove(struct pci_dev *pdev)
{
- struct txgbe_adapter *adapter = pci_get_drvdata(pdev);
+ struct wx *wx = pci_get_drvdata(pdev);
struct net_device *netdev;
- netdev = adapter->netdev;
+ netdev = wx->netdev;
unregister_netdev(netdev);
pci_release_selected_regions(pdev,
pci_select_bars(pdev, IORESOURCE_MEM));
- kfree(adapter->wx.mac_table);
+ kfree(wx->mac_table);
pci_disable_pcie_error_reporting(pdev);
@@ -77,18 +77,6 @@
#define TXGBE_SP_RAR_ENTRIES 128
#define TXGBE_SP_MC_TBL_SIZE 128
-/* board specific private data structure */
-struct txgbe_adapter {
- u8 __iomem *io_addr;
- /* OS defined structs */
- struct net_device *netdev;
- struct pci_dev *pdev;
- struct wx wx;
- u16 msg_enable;
-
- char eeprom_id[32];
-};
-
extern char txgbe_driver_name[];
#endif /* _TXGBE_TYPE_H_ */
Move the total private structure to libwx. Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> --- drivers/net/ethernet/wangxun/libwx/wx_hw.c | 2 +- drivers/net/ethernet/wangxun/libwx/wx_type.h | 2 + drivers/net/ethernet/wangxun/txgbe/txgbe_hw.c | 11 +- drivers/net/ethernet/wangxun/txgbe/txgbe_hw.h | 2 +- .../net/ethernet/wangxun/txgbe/txgbe_main.c | 125 ++++++++---------- .../net/ethernet/wangxun/txgbe/txgbe_type.h | 12 -- 6 files changed, 64 insertions(+), 90 deletions(-)