@@ -781,6 +781,9 @@ static int mark_stack_slots_dynptr(struct bpf_verifier_env *env, struct bpf_reg_
state->stack[spi - 1].spilled_ptr.ref_obj_id = id;
}
+ state->stack[spi].spilled_ptr.live |= REG_LIVE_WRITTEN;
+ state->stack[spi - 1].spilled_ptr.live |= REG_LIVE_WRITTEN;
+
return 0;
}
@@ -805,6 +808,31 @@ static int unmark_stack_slots_dynptr(struct bpf_verifier_env *env, struct bpf_re
__mark_reg_not_init(env, &state->stack[spi].spilled_ptr);
__mark_reg_not_init(env, &state->stack[spi - 1].spilled_ptr);
+
+ /* Why do we need to set REG_LIVE_WRITTEN for STACK_INVALID slot?
+ *
+ * While we don't allow reading STACK_INVALID, it is still possible to
+ * do <8 byte writes marking some but not all slots as STACK_MISC. Then,
+ * helpers or insns can do partial read of that part without failing,
+ * but check_stack_range_initialized, check_stack_read_var_off, and
+ * check_stack_read_fixed_off will do mark_reg_read for all 8-bytes of
+ * the slot conservatively. Hence we need to prevent those liveness
+ * marking walks.
+ *
+ * This was not a problem before because STACK_INVALID is only set by
+ * default (where the default reg state has its reg->parent as NULL), or
+ * in clean_live_states after REG_LIVE_DONE (at which point
+ * mark_reg_read won't walk reg->parent chain), but not randomly during
+ * verifier state exploration (like we did above). Hence, for our case
+ * parentage chain will still be live (i.e. reg->parent may be
+ * non-NULL), while earlier reg->parent was NULL, so we need
+ * REG_LIVE_WRITTEN to screen off read marker propagation when it is
+ * done later on reads or by mark_dynptr_read as well to unnecessary
+ * mark registers in verifier state.
+ */
+ state->stack[spi].spilled_ptr.live |= REG_LIVE_WRITTEN;
+ state->stack[spi - 1].spilled_ptr.live |= REG_LIVE_WRITTEN;
+
return 0;
}
@@ -2390,6 +2418,30 @@ static int mark_reg_read(struct bpf_verifier_env *env,
return 0;
}
+static int mark_dynptr_read(struct bpf_verifier_env *env, struct bpf_reg_state *reg)
+{
+ struct bpf_func_state *state = func(env, reg);
+ int spi, ret;
+
+ /* For CONST_PTR_TO_DYNPTR, it must have already been done by
+ * check_reg_arg in check_helper_call and mark_btf_func_reg_size in
+ * check_kfunc_call.
+ */
+ if (reg->type == CONST_PTR_TO_DYNPTR)
+ return 0;
+ spi = get_spi(reg->off);
+ /* Caller ensures dynptr is valid and initialized, which means spi is in
+ * bounds and spi is the first dynptr slot. Simply mark stack slot as
+ * read.
+ */
+ ret = mark_reg_read(env, &state->stack[spi].spilled_ptr,
+ state->stack[spi].spilled_ptr.parent, REG_LIVE_READ64);
+ if (ret)
+ return ret;
+ return mark_reg_read(env, &state->stack[spi - 1].spilled_ptr,
+ state->stack[spi - 1].spilled_ptr.parent, REG_LIVE_READ64);
+}
+
/* This function is supposed to be used by the following 32-bit optimization
* code only. It returns TRUE if the source or destination register operates
* on 64-bit, otherwise return FALSE.
@@ -5977,6 +6029,8 @@ int process_dynptr_func(struct bpf_verifier_env *env, int regno,
meta->uninit_dynptr_regno = regno;
} else /* MEM_RDONLY and None case from above */ {
+ int err;
+
/* For the reg->type == PTR_TO_STACK case, bpf_dynptr is never const */
if (reg->type == CONST_PTR_TO_DYNPTR && !(arg_type & MEM_RDONLY)) {
verbose(env, "cannot pass pointer to const bpf_dynptr, the helper mutates it\n");
@@ -6010,6 +6064,10 @@ int process_dynptr_func(struct bpf_verifier_env *env, int regno,
err_extra, regno);
return -EINVAL;
}
+
+ err = mark_dynptr_read(env, reg);
+ if (err)
+ return err;
}
return 0;
}
@@ -13215,10 +13273,9 @@ static bool stacksafe(struct bpf_verifier_env *env, struct bpf_func_state *old,
return false;
if (i % BPF_REG_SIZE != BPF_REG_SIZE - 1)
continue;
- if (!is_spilled_reg(&old->stack[spi]))
- continue;
- if (!regsafe(env, &old->stack[spi].spilled_ptr,
- &cur->stack[spi].spilled_ptr, idmap))
+ /* Both old and cur are having same slot_type */
+ switch (old->stack[spi].slot_type[BPF_REG_SIZE - 1]) {
+ case STACK_SPILL:
/* when explored and current stack slot are both storing
* spilled registers, check that stored pointers types
* are the same as well.
@@ -13229,7 +13286,30 @@ static bool stacksafe(struct bpf_verifier_env *env, struct bpf_func_state *old,
* such verifier states are not equivalent.
* return false to continue verification of this path
*/
+ if (!regsafe(env, &old->stack[spi].spilled_ptr,
+ &cur->stack[spi].spilled_ptr, idmap))
+ return false;
+ break;
+ case STACK_DYNPTR:
+ {
+ const struct bpf_reg_state *old_reg, *cur_reg;
+
+ old_reg = &old->stack[spi].spilled_ptr;
+ cur_reg = &cur->stack[spi].spilled_ptr;
+ if (old_reg->dynptr.type != cur_reg->dynptr.type ||
+ old_reg->dynptr.first_slot != cur_reg->dynptr.first_slot ||
+ !check_ids(old_reg->ref_obj_id, cur_reg->ref_obj_id, idmap))
+ return false;
+ break;
+ }
+ case STACK_MISC:
+ case STACK_ZERO:
+ case STACK_INVALID:
+ continue;
+ /* Ensure that new unhandled slot types return false by default */
+ default:
return false;
+ }
}
return true;
}
The root of the problem is missing liveness marking for STACK_DYNPTR slots. This leads to all kinds of problems inside stacksafe. The verifier by default inside stacksafe ignores spilled_ptr in stack slots which do not have REG_LIVE_READ marks. Since this is being checked in the 'old' explored state, it must have already done clean_live_states for this old bpf_func_state. Hence, it won't be receiving any more liveness marks from to be explored insns (it has received REG_LIVE_DONE marking from liveness point of view). What this means is that verifier considers that it's safe to not compare the stack slot if was never read by children states. While liveness marks are usually propagated correctly following the parentage chain for spilled registers (SCALAR_VALUE and PTR_* types), the same is not the case for STACK_DYNPTR. clean_live_states hence simply rewrites these stack slots to the type STACK_INVALID since it sees no REG_LIVE_READ marks. The end result is that we will never see STACK_DYNPTR slots in explored state. Even if verifier was conservatively matching !REG_LIVE_READ slots, very next check continuing the stacksafe loop on seeing STACK_INVALID would again prevent further checks. Now as long as verifier stores an explored state which we can compare to when reaching a pruning point, we can abuse this bug to make verifier prune search for obviously unsafe paths using STACK_DYNPTR slots thinking they are never used hence safe. Doing this in unprivileged mode is a bit challenging. add_new_state is only set when seeing BPF_F_TEST_STATE_FREQ (which requires privileges) or when jmps_processed difference is >= 2 and insn_processed difference is >= 8. So coming up with the unprivileged case requires a little more work, but it is still totally possible. The test case being discussed below triggers the heuristic even in unprivileged mode. However, it no longer works since commit 8addbfc7b308 ("bpf: Gate dynptr API behind CAP_BPF"). Let's try to study the test step by step. Consider the following program (C style BPF ASM): 0 r0 = 0; 1 r6 = &ringbuf_map; 3 r1 = r6; 4 r2 = 8; 5 r3 = 0; 6 r4 = r10; 7 r4 -= -16; 8 call bpf_ringbuf_reserve_dynptr; 9 if r0 == 0 goto pc+1; 10 goto pc+1; 11 *(r10 - 16) = 0xeB9F; 12 r1 = r10; 13 r1 -= -16; 14 r2 = 0; 15 call bpf_ringbuf_discard_dynptr; 16 r0 = 0; 17 exit; We know that insn 12 will be a pruning point, hence if we force add_new_state for it, it will first verify the following path as safe in straight line exploration: 0 1 3 4 5 6 7 8 9 -> 10 -> (12) 13 14 15 16 17 Then, when we arrive at insn 12 from the following path: 0 1 3 4 5 6 7 8 9 -> 11 (12) We will find a state that has been verified as safe already at insn 12. Since register state is same at this point, regsafe will pass. Next, in stacksafe, for spi = 0 and spi = 1 (location of our dynptr) is skipped seeing !REG_LIVE_READ. The rest matches, so stacksafe returns true. Next, refsafe is also true as reference state is unchanged in both states. The states are considered equivalent and search is pruned. Hence, we are able to construct a dynptr with arbitrary contents and use the dynptr API to operate on this arbitrary pointer and arbitrary size + offset. To fix this, first define a mark_dynptr_read function that propagates liveness marks whenever a valid initialized dynptr is accessed by dynptr helpers. REG_LIVE_WRITTEN is marked whenever we initialize an uninitialized dynptr. This is done in mark_stack_slots_dynptr. It allows screening off mark_reg_read and not propagating marks upwards from that point. This ensures that we either set REG_LIVE_READ64 on both dynptr slots, or none, so clean_live_states either sets both slots to STACK_INVALID or none of them. This is the invariant the checks inside stacksafe rely on. Next, do a complete comparison of both stack slots whenever they have STACK_DYNPTR. Compare the dynptr type stored in the spilled_ptr, and also whether both form the same first_slot. Only then is the later path safe. Fixes: 97e03f521050 ("bpf: Add verifier support for dynptrs") Acked-by: Eduard Zingerman <eddyz87@gmail.com> Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> --- kernel/bpf/verifier.c | 88 +++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 84 insertions(+), 4 deletions(-)