Message ID | 20230201163420.1579014-6-revest@chromium.org (mailing list archive) |
---|---|
State | Superseded |
Delegated to: | BPF |
Headers | show |
Series | Add ftrace direct call for arm64 | expand |
On Wed, Feb 01, 2023 at 05:34:17PM +0100, Florent Revest wrote: > Direct called trampolines can be called in two ways: > - either from the ftrace callsite. In this case, they do not access any > struct ftrace_regs nor pt_regs > - Or, if a ftrace ops is also attached, from the end of a ftrace > trampoline. In this case, the call_direct_funcs ops is in charge of > setting the direct call trampoline's address in a struct ftrace_regs > > Since "ftrace: pass fregs to arch_ftrace_set_direct_caller()", the later > case no longer requires a full pt_regs. Minor nit, but could we please have the commit ID, e.g. | Since commit: | | 9705bc70960459ae ("ftrace: pass fregs to arch_ftrace_set_direct_caller()") | | The latter case no longer requires a full pt_regs. > It only needs a struct > ftrace_regs so DIRECT_CALLS can work with both WITH_ARGS or WITH_REGS. > With architectures like arm64 already abandoning WITH_REGS in favor of > WITH_ARGS, it's important to have DIRECT_CALLS work WITH_ARGS only. > > Signed-off-by: Florent Revest <revest@chromium.org> > --- > kernel/trace/Kconfig | 2 +- > kernel/trace/ftrace.c | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) > > diff --git a/kernel/trace/Kconfig b/kernel/trace/Kconfig > index 5df427a2321d..4496a7c69810 100644 > --- a/kernel/trace/Kconfig > +++ b/kernel/trace/Kconfig > @@ -257,7 +257,7 @@ config DYNAMIC_FTRACE_WITH_REGS > > config DYNAMIC_FTRACE_WITH_DIRECT_CALLS > def_bool y > - depends on DYNAMIC_FTRACE_WITH_REGS > + depends on DYNAMIC_FTRACE_WITH_REGS || DYNAMIC_FTRACE_WITH_ARGS > depends on HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS > > config DYNAMIC_FTRACE_WITH_CALL_OPS > diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c > index b0426de11c45..73b6f6489ba1 100644 > --- a/kernel/trace/ftrace.c > +++ b/kernel/trace/ftrace.c > @@ -5282,7 +5282,7 @@ static LIST_HEAD(ftrace_direct_funcs); > > static int register_ftrace_function_nolock(struct ftrace_ops *ops); > > -#define MULTI_FLAGS (FTRACE_OPS_FL_DIRECT | FTRACE_OPS_FL_SAVE_REGS) > +#define MULTI_FLAGS (FTRACE_OPS_FL_DIRECT) Unfortunately, I think this is broken for architectures where: * DYNAMIC_FTRACE_WITH_DIRECT_CALLS=y * DYNAMIC_FTRACE_WITH_REGS=y * DYNAMIC_FTRACE_WITH_ARGS=n ... since those might pass a NULL ftrace_regs around, and so when using the list ops arch_ftrace_set_direct_caller() might blow up accessing an element of ftrace_regs. It looks like 32-bit x86 is the only case with that combination, and its ftrace_caller implementation passes a NULL regs, so I reckon that'll blow up. However, it looks like there aren't any FTRACE_DIRECT samples wired up for 32-bit x86, so I'm not aware of a test case we can use. We could make the FTRACE_OPS_FL_SAVE_REGS flag conditional, or we could implement DYNAMIC_FTRACE_WITH_ARGS for 32-bit x86 and have DYNAMIC_FTRACE_WITH_DIRECT_CALLS depend solely on that. Thanks, Mark.
On Thu, Feb 02, 2023 at 03:54:33PM +0000, Mark Rutland wrote: > On Wed, Feb 01, 2023 at 05:34:17PM +0100, Florent Revest wrote: > > -#define MULTI_FLAGS (FTRACE_OPS_FL_DIRECT | FTRACE_OPS_FL_SAVE_REGS) > > +#define MULTI_FLAGS (FTRACE_OPS_FL_DIRECT) > > Unfortunately, I think this is broken for architectures where: > > * DYNAMIC_FTRACE_WITH_DIRECT_CALLS=y > * DYNAMIC_FTRACE_WITH_REGS=y > * DYNAMIC_FTRACE_WITH_ARGS=n > > ... since those might pass a NULL ftrace_regs around, and so when using the > list ops arch_ftrace_set_direct_caller() might blow up accessing an element of > ftrace_regs. > > It looks like 32-bit x86 is the only case with that combination, and its > ftrace_caller implementation passes a NULL regs, so I reckon that'll blow up. > However, it looks like there aren't any FTRACE_DIRECT samples wired up for > 32-bit x86, so I'm not aware of a test case we can use. FWIW, the FTRACE_STARTUP_TEST tickles this: [ 1.896209] Testing tracer function_graph: [ 2.900282] BUG: kernel NULL pointer dereference, address: 0000002c [ 2.901171] #PF: supervisor write access in kernel mode [ 2.901171] #PF: error_code(0x0002) - not-present page [ 2.901171] *pde = 00000000 [ 2.901171] Oops: 0002 [#1] PREEMPT SMP [ 2.901171] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.2.0-rc3-00014-gcfd6340c71ce #1 [ 2.901171] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 [ 2.901171] EIP: call_direct_funcs+0xd/0x1c [ 2.901171] Code: 00 00 00 00 90 a9 00 00 00 01 0f 84 d7 fe ff ff 0d 00 00 80 00 89 46 04 e9 d2 fe ff ff 8b 41 64 85 c0 74 11 55 89 e5 8b 55 08 <89> 42 2c 5d c3 8d b6 00 00 00 00 c3 8d 76 00 89 c1 89 b [ 2.901171] EAX: cc3620e8 EBX: c1147e44 ECX: c1147e44 EDX: 00000000 [ 2.901171] ESI: fffffeff EDI: cc354208 EBP: c1147dbc ESP: c1147dbc [ 2.901171] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 EFLAGS: 00010286 [ 2.901171] CR0: 80050033 CR2: 0000002c CR3: 0d703000 CR4: 00350ed0 [ 2.901171] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 [ 2.901171] DR6: fffe0ff0 DR7: 00000400 [ 2.901171] Call Trace: [ 2.901171] arch_ftrace_ops_list_func+0xf5/0x1bc [ 2.901171] ? ftrace_enable_ftrace_graph_caller+0x3b/0x44 [ 2.901171] ? trace_selftest_startup_function_graph+0x1d9/0x298 [ 2.901171] ? syscall_unregfunc+0xa0/0xa0 [ 2.901171] ftrace_call+0x5/0x13 [ 2.901171] trace_selftest_dynamic_test_func+0x5/0xc [ 2.901171] trace_selftest_startup_function_graph+0x1d9/0x298 [ 2.901171] ? trace_selftest_dynamic_test_func+0x5/0xc [ 2.901171] ? trace_selftest_startup_function_graph+0x1d9/0x298 [ 2.901171] ? ftrace_check_record+0x340/0x340 [ 2.901171] ? ftrace_check_record+0x340/0x340 [ 2.901171] ? ftrace_stub_graph+0x4/0x4 [ 2.901171] ? trace_selftest_test_regs_func+0x18/0x18 [ 2.901171] run_tracer_selftest+0x7d/0x1bc [ 2.901171] ? graph_depth_read+0x90/0x90 [ 2.901171] register_tracer+0xd3/0x284 [ 2.901171] ? register_trace_event+0xf6/0x180 [ 2.901171] ? init_graph_tracefs+0x38/0x38 [ 2.901171] init_graph_trace+0x56/0x78 [ 2.901171] do_one_initcall+0x53/0x204 [ 2.901171] ? parse_args+0x143/0x3ec [ 2.901171] ? __kmem_cache_alloc_node+0x2d/0x224 [ 2.901171] kernel_init_freeable+0x198/0x2bc [ 2.901171] ? rdinit_setup+0x30/0x30 [ 2.901171] ? rest_init+0xb0/0xb0 [ 2.901171] kernel_init+0x1a/0x1d0 [ 2.901171] ? schedule_tail_wrapper+0x9/0xc [ 2.901171] ret_from_fork+0x1c/0x28 [ 2.901171] Modules linked in: [ 2.901171] CR2: 000000000000002c [ 2.901171] ---[ end trace 0000000000000000 ]--- [ 2.901171] EIP: call_direct_funcs+0xd/0x1c [ 2.901171] Code: 00 00 00 00 90 a9 00 00 00 01 0f 84 d7 fe ff ff 0d 00 00 80 00 89 46 04 e9 d2 fe ff ff 8b 41 64 85 c0 74 11 55 89 e5 8b 55 08 <89> 42 2c 5d c3 8d b6 00 00 00 00 c3 8d 76 00 89 c1 89 b [ 2.901171] EAX: cc3620e8 EBX: c1147e44 ECX: c1147e44 EDX: 00000000 [ 2.901171] ESI: fffffeff EDI: cc354208 EBP: c1147dbc ESP: c1147dbc [ 2.901171] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 EFLAGS: 00010286 [ 2.901171] CR0: 80050033 CR2: 0000002c CR3: 0d703000 CR4: 00350ed0 [ 2.901171] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 [ 2.901171] DR6: fffe0ff0 DR7: 00000400 [ 2.901171] note: swapper/0[1] exited with preempt_count 1 [ 2.901175] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009 [ 2.902171] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009 ]--- The below diff solved that for me. Thanks, Mark. ---->8---- diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h index 84f717f8959e..3d2156e335d7 100644 --- a/include/linux/ftrace.h +++ b/include/linux/ftrace.h @@ -241,6 +241,12 @@ enum { FTRACE_OPS_FL_DIRECT = BIT(17), }; +#ifndef CONFIG_DYNAMIC_FTRACE_WITH_ARGS +#define FTRACE_OPS_FL_SAVE_ARGS FTRACE_OPS_FL_SAVE_REGS +#else +#define FTRACE_OPS_FL_SAVE_ARGS 0 +#endif + /* * FTRACE_OPS_CMD_* commands allow the ftrace core logic to request changes * to a ftrace_ops. Note, the requests may fail. diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c index 73b6f6489ba1..8e739303b6a2 100644 --- a/kernel/trace/ftrace.c +++ b/kernel/trace/ftrace.c @@ -5282,7 +5282,7 @@ static LIST_HEAD(ftrace_direct_funcs); static int register_ftrace_function_nolock(struct ftrace_ops *ops); -#define MULTI_FLAGS (FTRACE_OPS_FL_DIRECT) +#define MULTI_FLAGS (FTRACE_OPS_FL_DIRECT | FTRACE_OPS_FL_SAVE_ARGS) static int check_direct_multi(struct ftrace_ops *ops) {
On Thu, Feb 2, 2023 at 4:54 PM Mark Rutland <mark.rutland@arm.com> wrote: > > On Wed, Feb 01, 2023 at 05:34:17PM +0100, Florent Revest wrote: > > Direct called trampolines can be called in two ways: > > - either from the ftrace callsite. In this case, they do not access any > > struct ftrace_regs nor pt_regs > > - Or, if a ftrace ops is also attached, from the end of a ftrace > > trampoline. In this case, the call_direct_funcs ops is in charge of > > setting the direct call trampoline's address in a struct ftrace_regs > > > > Since "ftrace: pass fregs to arch_ftrace_set_direct_caller()", the later > > case no longer requires a full pt_regs. > > Minor nit, but could we please have the commit ID, e.g. > > | Since commit: > | > | 9705bc70960459ae ("ftrace: pass fregs to arch_ftrace_set_direct_caller()") > | > | The latter case no longer requires a full pt_regs. Sure thing, will do!
On Thu, Feb 2, 2023 at 5:57 PM Mark Rutland <mark.rutland@arm.com> wrote: > > On Thu, Feb 02, 2023 at 03:54:33PM +0000, Mark Rutland wrote: > > On Wed, Feb 01, 2023 at 05:34:17PM +0100, Florent Revest wrote: > > > -#define MULTI_FLAGS (FTRACE_OPS_FL_DIRECT | FTRACE_OPS_FL_SAVE_REGS) > > > +#define MULTI_FLAGS (FTRACE_OPS_FL_DIRECT) > > > > Unfortunately, I think this is broken for architectures where: > > > > * DYNAMIC_FTRACE_WITH_DIRECT_CALLS=y > > * DYNAMIC_FTRACE_WITH_REGS=y > > * DYNAMIC_FTRACE_WITH_ARGS=n > > > > ... since those might pass a NULL ftrace_regs around, and so when using the > > list ops arch_ftrace_set_direct_caller() might blow up accessing an element of > > ftrace_regs. > > > > It looks like 32-bit x86 is the only case with that combination, and its > > ftrace_caller implementation passes a NULL regs, so I reckon that'll blow up. > > However, it looks like there aren't any FTRACE_DIRECT samples wired up for > > 32-bit x86, so I'm not aware of a test case we can use. > > FWIW, the FTRACE_STARTUP_TEST tickles this: Good catch and thanks for reproducing the bug too! > [ 1.896209] Testing tracer function_graph: > [ 2.900282] BUG: kernel NULL pointer dereference, address: 0000002c > [ 2.901171] #PF: supervisor write access in kernel mode > [ 2.901171] #PF: error_code(0x0002) - not-present page > [ 2.901171] *pde = 00000000 > [ 2.901171] Oops: 0002 [#1] PREEMPT SMP > [ 2.901171] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.2.0-rc3-00014-gcfd6340c71ce #1 > [ 2.901171] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 > [ 2.901171] EIP: call_direct_funcs+0xd/0x1c > [ 2.901171] Code: 00 00 00 00 90 a9 00 00 00 01 0f 84 d7 fe ff ff 0d 00 00 80 00 89 46 04 e9 d2 fe ff ff 8b 41 64 85 c0 74 11 55 89 e5 8b 55 08 <89> 42 2c 5d c3 8d b6 00 00 00 00 c3 8d 76 00 89 c1 89 b > [ 2.901171] EAX: cc3620e8 EBX: c1147e44 ECX: c1147e44 EDX: 00000000 > [ 2.901171] ESI: fffffeff EDI: cc354208 EBP: c1147dbc ESP: c1147dbc > [ 2.901171] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 EFLAGS: 00010286 > [ 2.901171] CR0: 80050033 CR2: 0000002c CR3: 0d703000 CR4: 00350ed0 > [ 2.901171] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 > [ 2.901171] DR6: fffe0ff0 DR7: 00000400 > [ 2.901171] Call Trace: > [ 2.901171] arch_ftrace_ops_list_func+0xf5/0x1bc > [ 2.901171] ? ftrace_enable_ftrace_graph_caller+0x3b/0x44 > [ 2.901171] ? trace_selftest_startup_function_graph+0x1d9/0x298 > [ 2.901171] ? syscall_unregfunc+0xa0/0xa0 > [ 2.901171] ftrace_call+0x5/0x13 > [ 2.901171] trace_selftest_dynamic_test_func+0x5/0xc > [ 2.901171] trace_selftest_startup_function_graph+0x1d9/0x298 > [ 2.901171] ? trace_selftest_dynamic_test_func+0x5/0xc > [ 2.901171] ? trace_selftest_startup_function_graph+0x1d9/0x298 > [ 2.901171] ? ftrace_check_record+0x340/0x340 > [ 2.901171] ? ftrace_check_record+0x340/0x340 > [ 2.901171] ? ftrace_stub_graph+0x4/0x4 > [ 2.901171] ? trace_selftest_test_regs_func+0x18/0x18 > [ 2.901171] run_tracer_selftest+0x7d/0x1bc > [ 2.901171] ? graph_depth_read+0x90/0x90 > [ 2.901171] register_tracer+0xd3/0x284 > [ 2.901171] ? register_trace_event+0xf6/0x180 > [ 2.901171] ? init_graph_tracefs+0x38/0x38 > [ 2.901171] init_graph_trace+0x56/0x78 > [ 2.901171] do_one_initcall+0x53/0x204 > [ 2.901171] ? parse_args+0x143/0x3ec > [ 2.901171] ? __kmem_cache_alloc_node+0x2d/0x224 > [ 2.901171] kernel_init_freeable+0x198/0x2bc > [ 2.901171] ? rdinit_setup+0x30/0x30 > [ 2.901171] ? rest_init+0xb0/0xb0 > [ 2.901171] kernel_init+0x1a/0x1d0 > [ 2.901171] ? schedule_tail_wrapper+0x9/0xc > [ 2.901171] ret_from_fork+0x1c/0x28 > [ 2.901171] Modules linked in: > [ 2.901171] CR2: 000000000000002c > [ 2.901171] ---[ end trace 0000000000000000 ]--- > [ 2.901171] EIP: call_direct_funcs+0xd/0x1c > [ 2.901171] Code: 00 00 00 00 90 a9 00 00 00 01 0f 84 d7 fe ff ff 0d 00 00 80 00 89 46 04 e9 d2 fe ff ff 8b 41 64 85 c0 74 11 55 89 e5 8b 55 08 <89> 42 2c 5d c3 8d b6 00 00 00 00 c3 8d 76 00 89 c1 89 b > [ 2.901171] EAX: cc3620e8 EBX: c1147e44 ECX: c1147e44 EDX: 00000000 > [ 2.901171] ESI: fffffeff EDI: cc354208 EBP: c1147dbc ESP: c1147dbc > [ 2.901171] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 EFLAGS: 00010286 > [ 2.901171] CR0: 80050033 CR2: 0000002c CR3: 0d703000 CR4: 00350ed0 > [ 2.901171] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 > [ 2.901171] DR6: fffe0ff0 DR7: 00000400 > [ 2.901171] note: swapper/0[1] exited with preempt_count 1 > [ 2.901175] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009 > [ 2.902171] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009 ]--- > > The below diff solved that for me. > > Thanks, > Mark. > > ---->8---- > diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h > index 84f717f8959e..3d2156e335d7 100644 > --- a/include/linux/ftrace.h > +++ b/include/linux/ftrace.h > @@ -241,6 +241,12 @@ enum { > FTRACE_OPS_FL_DIRECT = BIT(17), > }; > > +#ifndef CONFIG_DYNAMIC_FTRACE_WITH_ARGS > +#define FTRACE_OPS_FL_SAVE_ARGS FTRACE_OPS_FL_SAVE_REGS > +#else > +#define FTRACE_OPS_FL_SAVE_ARGS 0 Mh, could we (theoretically) be in a situation where an arch supports WITH_ARGS but it also has two ftrace_caller trampolines: one that saves the args and the other that saves nothing ? (For example if x86 migrates their WITH_REGS to WITH_ARGS only) Wouldn't it make sense then to define FTRACE_OPS_FL_SAVE_ARGS as an extra bit to tell ftrace that we need the args, similarly to FTRACE_OPS_FL_SAVE_REGS ? If that can't happen or if we want to leave this up for later, the patch lgtm and I can squash it into my patch 5 in v2. ;) > +#endif > + > /* > * FTRACE_OPS_CMD_* commands allow the ftrace core logic to request changes > * to a ftrace_ops. Note, the requests may fail. > diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c > index 73b6f6489ba1..8e739303b6a2 100644 > --- a/kernel/trace/ftrace.c > +++ b/kernel/trace/ftrace.c > @@ -5282,7 +5282,7 @@ static LIST_HEAD(ftrace_direct_funcs); > > static int register_ftrace_function_nolock(struct ftrace_ops *ops); > > -#define MULTI_FLAGS (FTRACE_OPS_FL_DIRECT) > +#define MULTI_FLAGS (FTRACE_OPS_FL_DIRECT | FTRACE_OPS_FL_SAVE_ARGS) > > static int check_direct_multi(struct ftrace_ops *ops) > { >
On Thu, Feb 02, 2023 at 07:19:58PM +0100, Florent Revest wrote: > On Thu, Feb 2, 2023 at 5:57 PM Mark Rutland <mark.rutland@arm.com> wrote: > > diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h > > index 84f717f8959e..3d2156e335d7 100644 > > --- a/include/linux/ftrace.h > > +++ b/include/linux/ftrace.h > > @@ -241,6 +241,12 @@ enum { > > FTRACE_OPS_FL_DIRECT = BIT(17), > > }; > > > > +#ifndef CONFIG_DYNAMIC_FTRACE_WITH_ARGS > > +#define FTRACE_OPS_FL_SAVE_ARGS FTRACE_OPS_FL_SAVE_REGS > > +#else > > +#define FTRACE_OPS_FL_SAVE_ARGS 0 > > Mh, could we (theoretically) be in a situation where an arch supports > WITH_ARGS but it also has two ftrace_caller trampolines: one that > saves the args and the other that saves nothing ? (For example if x86 > migrates their WITH_REGS to WITH_ARGS only) I don't think so -- the point of WITH_ARGS is that we always have to save/restore the args, and when WITH_ARGS is selected they're unconditionally available (though not necessarily a full pt_regs), which is what other code assumes when WITH_ARGS is selected. > Wouldn't it make sense then to define FTRACE_OPS_FL_SAVE_ARGS as an > extra bit to tell ftrace that we need the args, similarly to > FTRACE_OPS_FL_SAVE_REGS ? > > If that can't happen or if we want to leave this up for later, the > patch lgtm and I can squash it into my patch 5 in v2. ;) I think that can't happen, and for now the above should be fine. Thanks, Mark.
On Fri, Feb 3, 2023 at 11:03 AM Mark Rutland <mark.rutland@arm.com> wrote: > > On Thu, Feb 02, 2023 at 07:19:58PM +0100, Florent Revest wrote: > > On Thu, Feb 2, 2023 at 5:57 PM Mark Rutland <mark.rutland@arm.com> wrote: > > > diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h > > > index 84f717f8959e..3d2156e335d7 100644 > > > --- a/include/linux/ftrace.h > > > +++ b/include/linux/ftrace.h > > > @@ -241,6 +241,12 @@ enum { > > > FTRACE_OPS_FL_DIRECT = BIT(17), > > > }; > > > > > > +#ifndef CONFIG_DYNAMIC_FTRACE_WITH_ARGS > > > +#define FTRACE_OPS_FL_SAVE_ARGS FTRACE_OPS_FL_SAVE_REGS > > > +#else > > > +#define FTRACE_OPS_FL_SAVE_ARGS 0 > > > > Mh, could we (theoretically) be in a situation where an arch supports > > WITH_ARGS but it also has two ftrace_caller trampolines: one that > > saves the args and the other that saves nothing ? (For example if x86 > > migrates their WITH_REGS to WITH_ARGS only) > > I don't think so -- the point of WITH_ARGS is that we always have to > save/restore the args, and when WITH_ARGS is selected they're unconditionally > available (though not necessarily a full pt_regs), which is what other code > assumes when WITH_ARGS is selected. Perfect then! > > Wouldn't it make sense then to define FTRACE_OPS_FL_SAVE_ARGS as an > > extra bit to tell ftrace that we need the args, similarly to > > FTRACE_OPS_FL_SAVE_REGS ? > > > > If that can't happen or if we want to leave this up for later, the > > patch lgtm and I can squash it into my patch 5 in v2. ;) > > I think that can't happen, and for now the above should be fine. Yep
diff --git a/kernel/trace/Kconfig b/kernel/trace/Kconfig index 5df427a2321d..4496a7c69810 100644 --- a/kernel/trace/Kconfig +++ b/kernel/trace/Kconfig @@ -257,7 +257,7 @@ config DYNAMIC_FTRACE_WITH_REGS config DYNAMIC_FTRACE_WITH_DIRECT_CALLS def_bool y - depends on DYNAMIC_FTRACE_WITH_REGS + depends on DYNAMIC_FTRACE_WITH_REGS || DYNAMIC_FTRACE_WITH_ARGS depends on HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS config DYNAMIC_FTRACE_WITH_CALL_OPS diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c index b0426de11c45..73b6f6489ba1 100644 --- a/kernel/trace/ftrace.c +++ b/kernel/trace/ftrace.c @@ -5282,7 +5282,7 @@ static LIST_HEAD(ftrace_direct_funcs); static int register_ftrace_function_nolock(struct ftrace_ops *ops); -#define MULTI_FLAGS (FTRACE_OPS_FL_DIRECT | FTRACE_OPS_FL_SAVE_REGS) +#define MULTI_FLAGS (FTRACE_OPS_FL_DIRECT) static int check_direct_multi(struct ftrace_ops *ops) {
Direct called trampolines can be called in two ways: - either from the ftrace callsite. In this case, they do not access any struct ftrace_regs nor pt_regs - Or, if a ftrace ops is also attached, from the end of a ftrace trampoline. In this case, the call_direct_funcs ops is in charge of setting the direct call trampoline's address in a struct ftrace_regs Since "ftrace: pass fregs to arch_ftrace_set_direct_caller()", the later case no longer requires a full pt_regs. It only needs a struct ftrace_regs so DIRECT_CALLS can work with both WITH_ARGS or WITH_REGS. With architectures like arm64 already abandoning WITH_REGS in favor of WITH_ARGS, it's important to have DIRECT_CALLS work WITH_ARGS only. Signed-off-by: Florent Revest <revest@chromium.org> --- kernel/trace/Kconfig | 2 +- kernel/trace/ftrace.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)