@@ -2760,6 +2760,22 @@ void phy_advertise_supported(struct phy_device *phydev)
}
EXPORT_SYMBOL(phy_advertise_supported);
+/**
+ * phy_support_eee - Enable support of EEE
+ * @phydev: target phy_device struct
+ *
+ * Description: Called by the MAC to indicate is supports Energy
+ * Efficient Ethernet. This should be called before phy_start() in
+ * order that EEE is negotiated when the link comes up as part of
+ * phy_start().
+ */
+void phy_support_eee(struct phy_device *phydev)
+{
+ linkmode_copy(phydev->advertising_eee, phydev->supported_eee);
+ phydev->tx_lpi_enabled = true;
+}
+EXPORT_SYMBOL(phy_support_eee);
+
/**
* phy_support_sym_pause - Enable support of symmetrical pause
* @phydev: target phy_device struct
@@ -683,7 +683,7 @@ struct phy_device {
__ETHTOOL_DECLARE_LINK_MODE_MASK(lp_advertising);
/* used with phy_speed_down */
__ETHTOOL_DECLARE_LINK_MODE_MASK(adv_old);
- /* used for eee validation */
+ /* used for eee validation and configuration*/
__ETHTOOL_DECLARE_LINK_MODE_MASK(supported_eee);
__ETHTOOL_DECLARE_LINK_MODE_MASK(advertising_eee);
bool eee_enabled;
@@ -1823,6 +1823,7 @@ void phy_remove_link_mode(struct phy_device *phydev, u32 link_mode);
void phy_advertise_supported(struct phy_device *phydev);
void phy_support_sym_pause(struct phy_device *phydev);
void phy_support_asym_pause(struct phy_device *phydev);
+void phy_support_eee(struct phy_device *phydev);
void phy_set_sym_pause(struct phy_device *phydev, bool rx, bool tx,
bool autoneg);
void phy_set_asym_pause(struct phy_device *phydev, bool rx, bool tx);
In order for EEE to operate, both the MAC and the PHY need to support it, similar to how pause works. Copy the pause concept and add the call phy_support_eee() which the MAC makes after connecting the PHY to indicate it supports EEE. phylib will then advertise EEE when auto-neg is performed. Signed-off-by: Andrew Lunn <andrew@lunn.ch> --- drivers/net/phy/phy_device.c | 16 ++++++++++++++++ include/linux/phy.h | 3 ++- 2 files changed, 18 insertions(+), 1 deletion(-)